[root@test ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 446.1G 0 disk
├─sda1 8:1 0 2M 0 part
├─sda2 8:2 0 500M 0 part /boot
└─sda3 8:3 0 132G 0 part
├─cl-root 253:0 0 50G 0 lvm /
├─cl-swap 253:1 0 32G 0 lvm [SWAP]
└─cl-home 253:2 0 50G 0 lvm /home
sdb 8:16 0 5.5T 0 disk
└─sdb1 8:17 0 5.5T 0 part /data01
sdc 8:32 0 5.5T 0 disk
└─sdc1 8:33 0 5.5T 0 part /data02
sdd 8:48 0 5.5T 0 disk
└─sdd1 8:49 0 5.5T 0 part /data03
sde 8:64 0 5.5T 0 disk
└─sde1 8:65 0 5.5T 0 part /data04
sdf 8:80 0 5.5T 0 disk
└─sdf1 8:81 0 5.5T 0 part /data05
sdg 8:96 0 5.5T 0 disk
└─sdg1 8:97 0 5.5T 0 part /data06
sdh 8:112 0 5.5T 0 disk
└─sdh1 8:113 0 5.5T 0 part /data07
sdi 8:128 0 5.5T 0 disk
└─sdi1 8:129 0 5.5T 0 part /data08
sdj 8:144 0 5.5T 0 disk
└─sdj1 8:145 0 5.5T 0 part /data09
sdk 8:160 0 5.5T 0 disk
└─sdk1 8:161 0 5.5T 0 part /data10
sdl 8:176 0 5.5T 0 disk
└─sdl1 8:177 0 5.5T 0 part /data11
sdm 8:192 0 5.5T 0 disk
└─sdm1 8:193 0 5.5T 0 part /data12
2 新增分区,选择primary分区
[root@test ~]# fdisk /dev/sda
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.
Welcome to fdisk(util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sda: 479.0 GB, 478998953984 bytes, 935544832 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 65536 bytes / 65536 bytes
Disk label type: dos
Disk identifier: 0x0003ae25
Device Boot Start End Blocks Id System
/dev/sda1 2048 6143 2048 83 Linux
/dev/sda2 * 6144 1030143 512000 83 Linux
/dev/sda3 1030144 277870591 138420224 8e Linux LVM
Command (m for help): n
Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): p
Selected partition 4
First sector (277870592-935544831, default 277870592):
Using default value 277870592
Last sector, +sectors or +size{K,M,G}(277870592-935544831, default 935544831):
Using default value 935544831
Partition 4 of type Linux and of size 313.6 GiB is set
Command (m for help): p
Disk /dev/sda: 479.0 GB, 478998953984 bytes, 935544832 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 65536 bytes / 65536 bytes
Disk label type: dos
Disk identifier: 0x0003ae25
Device Boot Start End Blocks Id System
/dev/sda1 2048 6143 2048 83 Linux
/dev/sda2 * 6144 1030143 512000 83 Linux
/dev/sda3 1030144 277870591 138420224 8e Linux LVM
/dev/sda4 277870592 935544831 328837120 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.