centos安装redis4.0.6

一、安装redis

第一步：下载redis安装包

[root@iZwz991stxdwj560bfmadtZ local]# wget http://download.redis.io/releases/redis-4.0.6.tar.gz
--2017-12-13 12:35:12--  http://download.redis.io/releases/redis-4.0.6.tar.gz
Resolving download.redis.io (download.redis.io)... 109.74.203.151
Connecting to download.redis.io (download.redis.io)|109.74.203.151|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1723533 (1.6M) [application/x-gzip]
Saving to: ‘redis-4.0.6.tar.gz’

100%[==========================================================================================================>] 1,723,533    608KB/s   in 2.8s   

2017-12-13 12:35:15 (608 KB/s) - ‘redis-4.0.6.tar.gz’ saved [1723533/1723533]

第二步：解压压缩包

[root@iZwz991stxdwj560bfmadtZ local]# tar -zxvf redis-4.0.6.tar.gz

第三步：yum安装gcc依赖

[root@iZwz991stxdwj560bfmadtZ local]# yum install gcc

第四步：跳转到redis解压目录下

[root@iZwz991stxdwj560bfmadtZ local]# cd redis-4.0.6

第五步：编译安装

[root@iZwz991stxdwj560bfmadtZ redis-4.0.6]# make MALLOC=libc
 
[root@iZwz991stxdwj560bfmadtZ redis-4.0.6]# cd src && make install
    CC Makefile.dep

Hint: It's a good idea to run 'make test' ;)

    INSTALL install
    INSTALL install
    INSTALL install
    INSTALL install
    INSTALL install

二、启动redis的三种方式

[root@iZwz991stxdwj560bfmadtZ redis-4.0.6]# cd src
 

1、直接启动redis

[root@iZwz991stxdwj560bfmadtZ src]# ./redis-server
18685:C 13 Dec 12:56:12.507 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
18685:C 13 Dec 12:56:12.507 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=18685, just started
18685:C 13 Dec 12:56:12.507 # Warning: no config file specified, using the default config. In order to specify a config file use ./redis-server /path/to/redis.conf
                _._                                                  
           _.-``__ ''-._                                             
      _.-``    `.  `_.  ''-._           Redis 4.0.6 (00000000/0) 64 bit
  .-`` .-```.  ```\/    _.,_ ''-._                                   
 (    '      ,       .-`  | `,    )     Running in standalone mode
 |`-._`-...-` __...-.``-._|'` _.-'|     Port: 6379
 |    `-._   `._    /     _.-'    |     PID: 18685
  `-._    `-._  `-./  _.-'    _.-'                                   
 |`-._`-._    `-.__.-'    _.-'_.-'|                                  
 |    `-._`-._        _.-'_.-'    |           http://redis.io        
  `-._    `-._`-.__.-'_.-'    _.-'                                   
 |`-._`-._    `-.__.-'    _.-'_.-'|                                  
 |    `-._`-._        _.-'_.-'    |                                  
  `-._    `-._`-.__.-'_.-'    _.-'                                   
      `-._    `-.__.-'    _.-'                                       
          `-._        _.-'                                           
              `-.__.-'                                               

18685:M 13 Dec 12:56:12.508 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
18685:M 13 Dec 12:56:12.508 # Server initialized
18685:M 13 Dec 12:56:12.508 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
18685:M 13 Dec 12:56:12.508 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
18685:M 13 Dec 12:56:12.508 * Ready to accept connections　　

如上图：redis启动成功，但是这种启动方式需要一直打开窗口，不能进行其他操作，不太方便。

按 ctrl + c可以关闭窗口。

2、以后台进程方式启动redis

第一步：修改redis.conf文件

将

daemonize no

修改为

daemonize yes

3、设置redis开机自启动

1、在/etc目录下新建redis目录

[root@iZwz991stxdwj560bfmadtZ etc]# mkdir redis

2、将/usr/local/redis-4.0.6/redis.conf 文件复制一份到/etc/redis目录下，并命名为6379.conf

[root@iZwz991stxdwj560bfmadtZ redis]# cp /usr/local/redis-4.0.6/redis.conf /etc/redis/6379.conf

3、将redis的启动脚本复制一份放到/etc/init.d目录下

[root@iZwz991stxdwj560bfmadtZ init.d]# cp /usr/local/redis-4.0.6/utils/redis_init_script /etc/init.d/redisd

4、设置redis开机自启动

先切换到/etc/init.d目录下

然后执行自启命令

[root@iZwz991stxdwj560bfmadtZ init.d]# chkconfig redisd on
service redisd does not support chkconfig　

看结果是redisd不支持chkconfig

解决方法：

使用vim编辑redisd文件，在第一行加入如下两行注释，保存退出

# chkconfig:   2345 90 10
# description:  Redis is a persistent key-value database

注释的意思是，redis服务必须在运行级2，3，4，5下被启动或关闭，启动的优先级是90，关闭的优先级是10。

再次执行开机自启命令，成功

[root@iZwz991stxdwj560bfmadtZ init.d]# chkconfig redisd on
```　

现在可以直接已服务的形式启动和关闭redis了

启动：

service redisd start　
```java
[root@izwz991stxdwj560bfmadtz ~]# service redisd start
Starting Redis server...
2288:C 13 Dec 13:51:38.087 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
2288:C 13 Dec 13:51:38.087 # Redis version=4.0.6, bits=64, commit=00000000, modified=0, pid=2288, just started
2288:C 13 Dec 13:51:38.087 # Configuration loaded

关闭：

方法1：service redisd stop

[root@izwz991stxdwj560bfmadtz ~]# service redisd stop
Stopping ...
Redis stopped

错误处理：

cc: ../deps/hiredis/libhiredis.a: No such file or directorycc: ../deps/lua/src/liblua.
 
cc: error: ../deps/hiredis/libhiredis.a: No such file or directory
cc: error: ../deps/lua/src/liblua.a: No such file or directory
make[1]: *** [redis-server] Error 1
make[1]: Leaving directory `/usr/local/src/redis-4.0.1/src'
make: *** [all] Error 2

解决方法:
进入源码包目录下的deps目录中执行

make lua hiredis linenoise