推桌子 nyist220

推桌子

时间限制: 1000 ms  |  内存限制: 65535 KB
难度: 3
描述
The famous ACM (Advanced Computer Maker) Company has rented a floor of a building whose shape is in the following figure. 

The floor has 200 rooms each on the north side and south side along the corridor. Recently the Company made a plan to reform its system. The reform includes moving a lot of tables between rooms. Because the corridor is narrow and all the tables are big, only one table can pass through the corridor. Some plan is needed to make the moving efficient. The manager figured out the following plan: Moving a table from a room to another room can be done within 10 minutes. When moving a table from room i to room j, the part of the corridor between the front of room i and the front of room j is used. So, during each 10 minutes, several moving between two rooms not sharing the same part of the corridor will be done simultaneously. To make it clear the manager illustrated the possible cases and impossible cases of simultaneous moving. 

For each room, at most one table will be either moved in or moved out. Now, the manager seeks out a method to minimize the time to move all the tables. Your job is to write a program to solve the manager's problem.
输入
The input consists of T test cases. The number of test cases ) (T is given in the first line of the input file. Each test case begins with a line containing an integer N , 1 <= N <= 200, that represents the number of tables to move. 
Each of the following N lines contains two positive integers s and t, representing that a table is to move from room number s to room number t each room number appears at most once in the N lines). From the 3 + N -rd 
line, the remaining test cases are listed in the same manner as above.
输出
The output should contain the minimum time in minutes to complete the moving, one per line.
样例输入
3 
4 
10 20 
30 40 
50 60 
70 80 
2 
1 3 
2 200 
3 
10 100 
20 80 
30 50
样例输出
10
20
30

思路:

dilworth 定理


#include <iostream>
#include <string.h>

using namespace std;

#define MAXN 201

int results[MAXN];

void input()
{
    int t, n, from, to;

    cin >> t;

    while (t--)
    {
        cin >> n;

        int ans = 0;

        memset(results, 0, sizeof(results));

        for (int i = 0; i < n; i++)
        {
            cin >> from >> to;
			
            from = (from + 1) / 2;
            to = (to + 1) / 2;

            if (from > to)
            {
                int t = from;
                from = to;
                to = t;
            }

            for (int i = from; i <= to; i++)
            {
                results[i]++;
                ans = max(results[i], ans);
            }
        }

        cout << ans * 10 << endl;
    }
}

int main()
{
    std::ios::sync_with_stdio(false);
    input();
    return 0;
}


以下是51单片机控制的12864液晶显示系统编程实现所需的代码: ``` #include <reg51.h> #include <intrins.h> #define LCD_DB P0 sbit LCD_RS = P2^6; // RS信号 sbit LCD_RW = P2^5; // RW信号 sbit LCD_E = P2^7; // E信号 sbit LCD_CS1 = P2^0; // CS1信号 sbit LCD_CS2 = P2^1; // CS2信号 void delay(unsigned int i) // 延时函数 { while(i--); } void write_com(unsigned char com) // 写命令函数 { LCD_RS = 0; LCD_RW = 0; LCD_DB = com; LCD_E = 1; _nop_(); _nop_(); LCD_E = 0; } void write_data(unsigned char dat) // 写数据函数 { LCD_RS = 1; LCD_RW = 0; LCD_DB = dat; LCD_E = 1; _nop_(); _nop_(); LCD_E = 0; } void init_lcd() // 初始化函数 { write_com(0xc0); // 设置显示模式 write_com(0x3f); // 允许显示 write_com(0x40); // 设置起始地址 write_com(0xb8); // 设置页地址 write_com(0xc0); // 设置列地址 write_com(0x40); // 设置起始地址 write_com(0xb8); // 设置页地址 write_com(0xc0); // 设置列地址 } void display_string(unsigned char x, unsigned char y, unsigned char *s) // 显示字符串函数 { unsigned char i; if(y == 0) // 第一行居中显示“南阳理工学院” { write_com(0xb8 + x); write_com(0x40); } else if(y == 1) // 第二行居中显示“www.nyist.edu.cn” { write_com(0xb8 + x); write_com(0x48); } else if(y == 2) // 第三行居中显示“电子信息工程专业” { write_com(0xb8 + x); write_com(0x50); } else if(y == 3) // 第四行居中显示尚春芳 { write_com(0xb8 + x); write_com(0x58); } for(i = 0; s[i] != '\0'; i++) { write_data(s[i]); } } void main() { init_lcd(); // 初始化LCD display_string(18, 0, "南阳理工学院"); // 显示第一行 display_string(16, 1, "www.nyist.edu.cn"); // 显示第二行 display_string(16, 2, "电子信息工程专业"); // 显示第三行 display_string(22, 3, "尚春芳"); // 显示第四行 while(1); } ``` 以上代码实现了你提出的要求,第一行居中显示“南阳理工学院”,第二行居中显示“www.nyist.edu.cn”,第三行居中显示“电子信息工程专业”,第四行居中显示尚春芳。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值