创建新的缓存必须通过kmem_cache_create()函数来完成,流程如下:
1,从全局cache_cache中获得cache结构,因为全局cache_cache初始化对象的大小就是kmem_cache结构的大小,所以返回的指针正好可以转换为cache结构;调用 kmem_cache_zalloc(&cache_cache, gfp);
2,获得slab中碎片大小,由函数calculate_slab_order()实现;
3,计算并初始化cache的各种属性,如果是外置式,需要用kmem_find_general_cachep(slab_size, 0u)指定cachep->slabp_cache,用于存放slab对象和kmem_bufctl_t[]数组;
4,设置每个CPU上得本地cache,setup_cpu_cache();
5,cache创建完毕,将其加入到全局slab cache链表中;
struct kmem_cache *
kmem_cache_create (const char *name, size_t size, size_t align,
unsigned long flags, void (*ctor)(void *))
- name:所创建的新缓存的名字
- size :缓存所分配对象的大小
- align:对象的对齐值
- flags:创建用的标识
- ctor:创建对象时的构造函数
struct kmem_cache *
__kmem_cache_create (const char *name, size_t size, size_t align,
unsigned long flags, void (*ctor)(void *))
{
size_t left_over, slab_size, ralign;
struct kmem_cache *cachep = NULL;
gfp_t gfp;
#if DEBUG
#if FORCED_DEBUG
/*
* Enable redzoning and last user accounting, except for caches with
* large objects, if the increased size would increase the object size
* above the next power of two: caches with object sizes just above a
* power of two have a significant amount of internal fragmentation.
*/
if (size < 4096 || fls(size - 1) == fls(size-1 + REDZONE_ALIGN +
2 * sizeof(unsigned long long)))
flags |= SLAB_RED_ZONE | SLAB_STORE_USER;
if (!(flags & SLAB_DESTROY_BY_RCU))
flags |= SLAB_POISON;
#endif
if (flags & SLAB_DESTROY_BY_RCU)
BUG_ON(flags & SLAB_POISON);
#endif
/*
* Always checks flags, a caller might be expecting debug support which
* isn't available.
*/
BUG_ON(flags & ~CREATE_MASK);
/*
* Check that size is in terms of words. This is needed to avoid
* unaligned accesses for some archs when redzoning is used, and makes
* sure any on-slab bufctl's are also correctly aligned.
*/
if (size & (BYTES_PER_WORD - 1)) {
size += (BYTES_PER_WORD - 1);
size &= ~(BYTES_PER_WORD - 1);
}
/* calculate the final buffer alignment: */
/* 1) arch recommendation: can be overridden for debug */
if (flags & SLAB_HWCACHE_ALIGN) {
/*
* Default alignment: as specified by the arch code. Except if
* an object is really small, then squeeze multiple objects into
* one cacheline.
*/
ralign = cache_line_size();
while (size <= ralign / 2)
ralign /= 2;
} else {
ralign = BYTES_PER_WORD;
}
/*
* Redzoning and user store require word alignment or possibly larger.
* Note this will be overridden by architecture or caller mandated
* alignment if either is greater than BYTES_PER_WORD.
*/
if (flags & SLAB_STORE_USER)
ralign = BYTES_PER_WORD;
if (flags & SLAB_RED_ZONE) {
ralign = REDZONE_ALIGN;
/* If redzoning, ensure that the second redzone is suitably
* aligned, by adjusting the object size accordingly. */
size += REDZONE_ALIGN - 1;
size &= ~(REDZONE_ALIGN - 1);
}
/* 2) arch mandated alignment */
if (ralign < ARCH_SLAB_MINALIGN) {
ralign = ARCH_SLAB_MINALIGN;
}
/* 3) caller mandated alignment */
if (ralign < align) {
ralign = align;
}
/* disable debug if necessary */
if (ralign > __alignof__(unsigned long long))
flags &= ~(SLAB_RED_ZONE | SLAB_STORE_USER);
/*
* 4) Store it.
*/
align = ralign;
if (slab_is_available()) /* slab分配器是否已经可用 */
gfp = GFP_KERNEL;
else
gfp = GFP_NOWAIT;
/* Get cache's description obj. */
<span style="white-space:pre"> /* 获得struct kmem_cache对象 ,为什么能从cache中获得的对象是
kmem_cache结构呢,因为这里的全局变量cache_cache的对象大小
就是kmem_cache结构大小*/ </span>
cachep = kmem_cache_zalloc(&cache_cache, gfp);
if (!cachep)
return NULL;
cachep->nodelists = (struct kmem_list3 **)&cachep->array[nr_cpu_ids];
cachep->object_size = size;
cachep->align = align;
#if DEBUG
/*
* Both debugging options require word-alignment which is calculated
* into align above.
*/
if (flags & SLAB_RED_ZONE) {
/* add space for red zone words */
cachep->obj_offset += sizeof(unsigned long long);
size += 2 * sizeof(unsigned long long);
}
if (flags & SLAB_STORE_USER) {
/* user store requires one word storage behind the end of
* the real object. But if the second red zone needs to be
* aligned to 64 bits, we must allow that much space.
*/
if (flags & SLAB_RED_ZONE)
size += REDZONE_ALIGN;
else
size += BYTES_PER_WORD;
}
#if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
if (size >= malloc_sizes[INDEX_L3 + 1].cs_size
&& cachep->object_size > cache_line_size() && ALIGN(size, align) < PAGE_SIZE) {
cachep->obj_offset += PAGE_SIZE - ALIGN(size, align);
size = PAGE_SIZE;
}
#endif
#endif
/*
* Determine if the slab management is 'on' or 'off' slab.
* (bootstrapping cannot cope with offslab caches so don't do
* it too early on. Always use on-slab management when
* SLAB_NOLEAKTRACE to avoid recursive calls into kmemleak)
*//* 确定slab管理对象的存储方式:内置还是外置
。通常,当对象大于等于512时,使用外置方式
。初始化阶段采用内置式。
if ((size >= (PAGE_SIZE >> 3)) && !slab_early_init &&
!(flags & SLAB_NOLEAKTRACE))
/*
* Size is large, assume best to place the slab management obj
* off-slab (should allow better packing of objs).
*/
flags |= CFLGS_OFF_SLAB;
size = ALIGN(size, align);
left_over = calculate_slab_order(cachep, size, align, flags);/* 获得slab中碎片的大小 */
if (!cachep->num) { /* cachep->num为该cache中每个slab的对象数,为0,表示为该对象创建cache失败 */
printk(KERN_ERR
"kmem_cache_create: couldn't create cache %s.\n", name);
kmem_cache_free(&cache_cache, cachep);
return NULL;
}
slab_size = ALIGN(cachep->num * sizeof(kmem_bufctl_t)
+ sizeof(struct slab), align);
/*
* If the slab has been placed off-slab, and we have enough space then
* move it on-slab. This is at the expense of any extra colouring.
*//* 如果这是一个外置式slab,并且碎片大小大于slab管理对象的大小
<span style="white-space:pre"> </span>,则可将slab管理对象移到slab中,改造成一个内置式slab */
if (flags & CFLGS_OFF_SLAB && left_over >= slab_size) {
flags &= ~CFLGS_OFF_SLAB;
left_over -= slab_size;
}
<span style="white-space:pre"> /* align是针对slab对象的,如果slab管理对象是外置存储
,自然不会像内置那样影响到后面slab对象的存储位置
,也就不需要对齐了 */ </span>
if (flags & CFLGS_OFF_SLAB) {
/* really off slab. No need for manual alignment */
slab_size =
cachep->num * sizeof(kmem_bufctl_t) + sizeof(struct slab);
#ifdef CONFIG_PAGE_POISONING
/* If we're going to use the generic kernel_map_pages()
* poisoning, then it's going to smash the contents of
* the redzone and userword anyhow, so switch them off.
*/
if (size % PAGE_SIZE == 0 && flags & SLAB_POISON)
flags &= ~(SLAB_RED_ZONE | SLAB_STORE_USER);
#endif
}
cachep->colour_off = cache_line_size(); /* cache的着色块的单位大小 */
/* Offset must be a multiple of the alignment. */
if (cachep->colour_off < align)
cachep->colour_off = align; /* 着色块大小必须是对象要求对齐方式的倍数 */
cachep->colour = left_over / cachep->colour_off; /* 计算碎片区需要多少个着色快 */
cachep->slab_size = slab_size; /* slab管理对象的大小 */
cachep->flags = flags;
cachep->allocflags = 0;
if (CONFIG_ZONE_DMA_FLAG && (flags & SLAB_CACHE_DMA))
cachep->allocflags |= GFP_DMA;
cachep->size = size;/* slab对象的大小 */
cachep->reciprocal_buffer_size = reciprocal_value(size);
if (flags & CFLGS_OFF_SLAB) { /* 分配一个slab管理区域对象,保存在slabp_cache中,
这个函数传入的大小为slab_size,也就是分配slab_size大小的cache
,在slab创建的时候如果是外置式,那么需要从分配的这里面
分配出slab对象,剩下的空间放kmem_bufctl_t[]数组,
如果是内置式的slab,此指针为空 */
cachep->slabp_cache = kmem_find_general_cachep(slab_size, 0u);
/*
* This is a possibility for one of the malloc_sizes caches.
* But since we go off slab only for object size greater than
* PAGE_SIZE/8, and malloc_sizes gets created in ascending order,
* this should not happen at all.
* But leave a BUG_ON for some lucky dude.
*/
BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));
}
cachep->ctor = ctor;
cachep->name = name;
if (setup_cpu_cache(cachep, gfp)) { /* 设置每个cpu上的local cache */
__kmem_cache_destroy(cachep);
return NULL;
}
if (flags & SLAB_DEBUG_OBJECTS) {
/*
* Would deadlock through slab_destroy()->call_rcu()->
* debug_object_activate()->kmem_cache_alloc().
*/
WARN_ON_ONCE(flags & SLAB_DESTROY_BY_RCU);
slab_set_debugobj_lock_classes(cachep);
}
/* cache setup completed, link it into the list */
list_add(&cachep->list, &slab_caches); /* cache创建完毕,将其加入到全局slab cache链表中 */
return cachep
}
static struct kmem_cache cache_cache = {
.nodelists = cache_cache_nodelists,
.batchcount = 1,
.limit = BOOT_CPUCACHE_ENTRIES,
.shared = 1,
.size = sizeof(struct kmem_cache),
.name = "kmem_cache",
};
/**
* calculate_slab_order - calculate size (page order) of slabs
* @cachep: pointer to the cache that is being created
* @size: size of objects to be created in this cache.
* @align: required alignment for the objects.
* @flags: slab allocation flags
*
* Also calculates the number of objects per slab.
*
* This could be made much more intelligent. For now, try to avoid using
* high order pages for slabs. When the gfp() functions are more friendly
* towards high-order requests, this should be changed.
*/
/*计算slab由几个页面组成,同时计算每个slab中有多少对象*/
static size_t calculate_slab_order(struct kmem_cache *cachep,
size_t size, size_t align, unsigned long flags)
{
unsigned long offslab_limit;
size_t left_over = 0;
int gfporder;
for (gfporder = 0; gfporder <= KMALLOC_MAX_ORDER; gfporder++) {
unsigned int num;
size_t remainder;
/* 计算slab中对象数 */
cache_estimate(gfporder, size, align, flags, &remainder, &num);
/* 对象数为0,表示此order下,一个对象都放不下,检查下一order */
if (!num)
continue;
if (flags & CFLGS_OFF_SLAB) {
/*
* Max number of objs-per-slab for caches which
* use off-slab slabs. Needed to avoid a possible
* looping condition in cache_grow().
*/
/* 创建一个外置式slab时,要相应分配该slab的管理对象
,包含struct slab对象和kmem_bufctl_t数组,分配管理对象的流程就是分配普通对象的流程
,再来看一下分配对象的流程:
kmem_cache_alloc->__cache_alloc-> __do_cache_alloc-> ____cache_alloc-> cache_alloc_refill-> cache_grow-> alloc_slabmgmt-> kmem_cache_alloc_node-> kmem_cache_alloc
可以看出这里可能存在一个循环,循环的关键在于alloc_slabmgmt函数
,当slab管理对象是off-slab方式时,就形成了循环
。那么什么时候slab管理对象会采用外置式slab呢?显然当其管理的slab中对象很多
,从而kmem_bufctl_t数组很大,致使整个管理对象也很大,此时才会形成循环
。故需要对kmem_bufctl_t的数目做限制,下面的算法是很粗略的,既然对象大小为size时
,是外置式slab,那么我们假设管理对象的大小也是size,计算出kmem_bufctl_t数组的大小
,即此大小的kmem_bufctl_t数组一定会造成管理对象是外置式slab。之所以说粗略
,是指数组大小小于这个限制时,也不能确保管理对象一定是内置式slab。但这也不会引发错误
,因为还有一个slab_break_gfp_order阀门来控制每个slab所占页面数,通常其值为1,即每个slab最多两个页面
,外置式slab存放的都是大于512的大对象,所以
slab中不会有太多的大对象,kmem_bufctl_t数组也不会很大,粗略判断一下就足够了。
*/
offslab_limit = size - sizeof(struct slab);
offslab_limit /= sizeof(kmem_bufctl_t);
/* 对象数目大于限制,跳出循环,不再尝试更大的order
,避免slab中对象数目过多
,此时计算的对象数也是有效的,循环一次没什么 */
if (num > offslab_limit)
break;
}
/* Found something acceptable - save it away */
/* 每个slab中的对象数 */
cachep->num = num;
/* slab的order,即由几个页面组成 */
cachep->gfporder = gfporder;
/* slab中剩余空间(碎片)的大小 */
left_over = remainder;
/*
* A VFS-reclaimable slab tends to have most allocations
* as GFP_NOFS and we really don't want to have to be allocating
* higher-order pages when we are unable to shrink dcache.
*/
/* SLAB_RECLAIM_ACCOUNT表示此slab所占页面为可回收的
,当内核检测是否有足够的页面满足用户态的需求时
,此类页面将被计算在内,通过调用
kmem_freepages()函数可以释放分配给slab的页框。由于是可回收的
,所以不需要做后面的碎片检测了 */
if (flags & SLAB_RECLAIM_ACCOUNT)
break;
/*
* Large number of objects is good, but very large slabs are
* currently bad for the gfp()s.
*/
/* slab_break_gfp_order为slab所占页面的阀门,超过这个阀门时
,无论碎片大小,都不再检测更高的order了 */
if (gfporder >= slab_break_gfp_order)
break;
/*
* Acceptable internal fragmentation?
*/
/* slab所占页面的大小是碎片大小的8倍以上
,页面利用率较高,可以接受这样的order */
if (left_over * 8 <= (PAGE_SIZE << gfporder))
break;
}
/* 返回碎片大小 */
return left_over;
设置cpu的cache
/*配置local cache和slab三链。*/
static int __init_refok setup_cpu_cache(struct kmem_cache *cachep, gfp_t gfp)
{
/* general cache初始化完毕,配置每个cpu的local cache */
if (g_cpucache_up == FULL)
return enable_cpucache(cachep, gfp);
/* 此时处于系统初始化阶段,g_cpucache_up记录general cache初始化的进度
,比如PARTIAL_AC表示struct array_cache所在的cache已经创建,
PARTIAL_L3表示struct kmem_list3所在的cache已经创建
,注意创建这两个cache的先后顺序
。在初始化阶段只需配置主cpu的local cache和slab三链 */
if (g_cpucache_up == NONE) {
/*
* Note: the first kmem_cache_create must create the cache
* that's used by kmalloc(24), otherwise the creation of
* further caches will BUG().
*/
/* 初始化阶段创建struct array_cache所在cache时进入这个流程
,此时struct array_cache所在的general cache还未创建
,只能使用静态分配的全局变量initarray_generic表示的local cache */
cachep->array[smp_processor_id()] = &initarray_generic.cache;
/*
* If the cache that's used by kmalloc(sizeof(kmem_list3)) is
* the first cache, then we need to set up all its list3s,
* otherwise the creation of further caches will BUG().
*/
/* 创建struct kmem_list3所在的cache是在struct array_cache所在cache之后
,所以此时struct kmem_list3所在的
cache也一定没有创建,也需要使用全局变量 */
set_up_list3s(cachep, SIZE_AC);
/* 执行到这struct array_cache所在的cache创建完毕
,如果struct kmem_list3和struct array_cache位于同一个general cache中
,不会再重复创建了
,g_cpucache_up表示的进度更进一步 */
if (INDEX_AC == INDEX_L3)
g_cpucache_up = PARTIAL_L3;
else
g_cpucache_up = PARTIAL_AC;
} else {
/* g_cpucache_up至少为PARTIAL_AC时进入这个流程,struct array_cache所在的
general cache已经建立起来,可以通过kmalloc分配了 */
cachep->array[smp_processor_id()] =
kmalloc(sizeof(struct arraycache_init), gfp);
if (g_cpucache_up == PARTIAL_AC) {
/* struct kmem_list3所在cache仍未创建完毕,还需使用全局的slab三链 */
set_up_list3s(cachep, SIZE_L3);
/* 后面将会分析kmem_cache_init函数,只有创建struct kmem_list3所在
cache时才会进入此流程,上面的代码执行完,struct kmem_list3所在
cache也就创建完毕可以使用了,更新g_cpucache_up */
g_cpucache_up = PARTIAL_L3;
} else {
int node;
for_each_online_node(node) {
cachep->nodelists[node] =/* 通过kmalloc分配struct kmem_list3对象 */
kmalloc_node(sizeof(struct kmem_list3),
gfp, node);
BUG_ON(!cachep->nodelists[node]);
/* 初始化slab三链 */
kmem_list3_init(cachep->nodelists[node]);
}
}
}
/* 设置回收时间 */
cachep->nodelists[numa_node_id()]->next_reap =
jiffies + REAPTIMEOUT_LIST3 +
((unsigned long)cachep) % REAPTIMEOUT_LIST3;
cpu_cache_get(cachep)->avail = 0;
cpu_cache_get(cachep)->limit = BOOT_CPUCACHE_ENTRIES;
cpu_cache_get(cachep)->batchcount = 1;
cpu_cache_get(cachep)->touched = 0;
cachep->batchcount = 1;
cachep->limit = BOOT_CPUCACHE_ENTRIES;
return 0;
}
- 计算对齐值
- 分配一个缓存描述符
- 确定slab管理区(slab描述符+kmem_bufctl_t数组)的存储位置
- 调用calculate_slab_order()进行相关项的计算,包括分配给slab的页阶数,碎片大小,slab的对象数
- 计算着色偏移和可用的颜色数量
- 调用setup_cpu_cache()分配array_cache描述符和kmem_list3描述符并初始化相关变量
- 最后将缓存描述符插入cache_chain中
- 销毁缓存首先要保证的一点就是缓存当中所有的对象都是空闲的,也就是之前分配出去的对象都已经释放回来了,其主要的步骤如下
- cache的销毁依次检查和释放本地CPU cache、共享cache、三链以及cache本身。从cache的创建我们看到,创建的cache主要是从cache_cache中获得的,因为cache_cache中对象的大小就是cache结构体的大小,
/**
* kmem_cache_destroy - delete a cache
* @cachep: the cache to destroy
*
* Remove a &struct kmem_cache object from the slab cache.
*
* It is expected this function will be called by a module when it is
* unloaded. This will remove the cache completely, and avoid a duplicate
* cache being allocated each time a module is loaded and unloaded, if the
* module doesn't have persistent in-kernel storage across loads and unloads.
*
* The cache must be empty before calling this function.
*
* The caller must guarantee that no one will allocate memory from the cache
* during the kmem_cache_destroy().
*/
void kmem_cache_destroy(struct kmem_cache *cachep)
{
BUG_ON(!cachep || in_interrupt());
/* Find the cache in the chain of caches. */
get_online_cpus();
mutex_lock(&slab_mutex);
/*
* the chain is never empty, cache_cache is never destroyed
*/
list_del(&cachep->list);/*将cache从cache_chain中删除*/
<span style="white-space:pre"> </span>
<span style="white-space:pre"> /*释放完free链表,如果FULL链表或partial链表中还有slab,说明还有对象处于分配状态
因此不能销毁该缓存!*/ </span>
if (__cache_shrink(cachep)) {
slab_error(cachep, "Can't free all objects");
list_add(&cachep->list, &slab_caches); /*重新将缓存添加到cache_chain链表中*/
mutex_unlock(&slab_mutex);
put_online_cpus();
return;
}
if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU))
rcu_barrier();
__kmem_cache_destroy(cachep);/*释放cache所涉及到的各个描述符的存储对象*/
mutex_unlock(&slab_mutex);
put_online_cpus();
static int __cache_shrink(struct kmem_cache *cachep)
{
int ret = 0, i = 0;
struct kmem_list3 *l3;
/*将本地高速缓存,share本地高速缓存以及l3-->alien高速缓存的空闲对象释放slab*/
drain_cpu_caches(cachep);
check_irq_on();
for_each_online_node(i) {
l3 = cachep->nodelists[i];
if (!l3)
continue;
/*销毁空闲链表中的slab*/
drain_freelist(cachep, l3, l3->free_objects);
/*判断full和partial是否为空,有一个不为空则ret就为1*/
ret += !list_empty(&l3->slabs_full) ||
!list_empty(&l3->slabs_partial);
}
return (ret ? 1 : 0);
}
static void __kmem_cache_destroy(struct kmem_cache *cachep)
{
int i;
struct kmem_list3 *l3;
/* 释放每个cpu local cache使用的struct array_cache对象
,注意此时是online cpu, cpu如果是down状
态,并没有释放 */
for_each_online_cpu(i)
kfree(cachep->array[i]);
/* NUMA: free the list3 structures */
for_each_online_node(i) {/*对每个在线的节点*/
l3 = cachep->nodelists[i];
if (l3) {
/* 释放shared local cache使用的struct array_cache对象 */
kfree(l3->shared);
free_alien_cache(l3->alien);
kfree(l3);/*释放三链*/
}
}
/*释放cache,因为该cache为cache_cache中的对象,所以调用对象释放
函数*/
kmem_cache_free(&cache_cache, cachep);
}
static void drain_cpu_caches(struct kmem_cache *cachep)
{
struct kmem_list3 *l3;
int node;
on_each_cpu(do_drain, cachep, 1);
check_irq_on();
for_each_online_node(node) {
l3 = cachep->nodelists[node];
if (l3 && l3->alien)
drain_alien_cache(cachep, l3->alien); //destory arraycache
}
for_each_online_node(node) {
l3 = cachep->nodelists[node];
if (l3)
drain_array(cachep, l3, l3->shared, 1, node);//destory share arraycache
}
}
/*
* Remove slabs from the list of free slabs.
* Specify the number of slabs to drain in tofree.
*
* Returns the actual number of slabs released.
*/
static int drain_freelist(struct kmem_cache *cache,
struct kmem_list3 *l3, int tofree)
{
struct list_head *p;
int nr_freed;
struct slab *slabp;
nr_freed = 0;
while (nr_freed < tofree && !list_empty(&l3->slabs_free)) {/*slab中的对象还未释放完并且free链表不为空*/
spin_lock_irq(&l3->list_lock);
p = l3->slabs_free.prev;
if (p == &l3->slabs_free) {/*链表中已无元素*/
spin_unlock_irq(&l3->list_lock);
goto out;
}
slabp = list_entry(p, struct slab, list);/*从free链表中取出一个slab*/
#if DEBUG
BUG_ON(slabp->inuse);
#endif
list_del(&slabp->list);/*从链表中删除*/
/*
* Safe to drop the lock. The slab is no longer linked
* to the cache.
*/
l3->free_objects -= cache->num; /*空闲对象数量总数减去num*/
spin_unlock_irq(&l3->list_lock);
slab_destroy(cache, slabp);<span style="font-family: Consolas, 'Courier New', Courier, mono, serif; font-size: 13.3333px; line-height: 20px; background-color: rgb(248, 248, 248);"></span> /*销毁slab 见后面slab 销毁分析* / <span style="margin: 0px; padding: 0px; border: none; font-family: Consolas, 'Courier New', Courier, mono, serif; font-size: 13.3333px; line-height: 20px; background-color: rgb(248, 248, 248);"></span>
nr_freed++;
}
out:
return nr_freed;
}
/
static void __kmem_cache_destroy(struct kmem_cache *cachep)
{
int i;
struct kmem_list3 *l3;
/*释放存储本地高速缓存描述符的对象*/
for_each_online_cpu(i)
kfree(cachep->array[i]);
/* NUMA: free the list3 structures */
for_each_online_node(i) {
l3 = cachep->nodelists[i];
if (l3) {
/*释放存储共享本地高速缓存描述符的对象*/
kfree(l3->shared);
/*释放存储alien本地高速缓存描述符的对象*/
free_alien_cache(l3->alien);
/*释放存储kmem_list3描述符的对象*/
kfree(l3);
}
}
/*释放存储缓存描述符的对象*/
kmem_cache_free(&cache_cache, cachep);
}