USB CDC 4G Module 调试问题总结

USB CDC 4G Module
ESP32S2 自定义开发板
SIM7600C1
其他按照github USB CDC 4G Module 使用说明
确保硬件正确SIM卡正常
编译注意做好在4.4版本下。
配置过程注意运营商APN
编译没问题下载可能不成功log提示

I (10405) gpio: GPIO[41]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
E (10473) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (10474) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (10915) esp-modem-dte: esp_modem_dte_send_cmd(196): process command timeout
 response timeoutem_dce: esp_modem_dce_generic_command(31): Command:AT
I (10921) modem_board: Current timeouts: 1 and errors: 0
E (10932) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (13540) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (17874) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (17909) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (17911) esp-modem-dte: esp_dte_handle_line(88): handle line failed
E (18927) esp-modem-dte: esp_modem_dte_send_cmd(196): process command timeout
W (18927) esp_modem_dce: esp_modem_dce_generic_command(31): Command:+++ response timeout

出现以上问题是AT指令延时，模块启动延时配置问题

结果如下

希望大家不走弯路