hbase-1.0.1的master页面无法打开

最新推荐文章于 2022-06-24 13:39:44 发布

杨过悔

最新推荐文章于 2022-06-24 13:39:44 发布

阅读量1.7k

点赞数

分类专栏： Hadoop笔记

本文链接：https://blog.csdn.net/u013571243/article/details/48615001

版权

HBase在0.98.x版本后，Master和RegionServer的Web UI端口发生变化，分别从60010和60030改为16010和16030。正确配置后，可以通过http://node-a.example.com:16010/或http://node-b.example.com:16010/访问Master的Web UI。如果只能通过localhost连接，请检查防火墙规则。RegionServer的Web UI可通过它们IP地址的16030端口查看。可以通过关闭进程并观察日志来测试节点或服务消失时的情况。

摘要由CSDN通过智能技术生成

在0.98.x之后master的web查看地址修改了

翻了官方doc,找到

4.Browse to the Web UI.

Web UI Port Changes
Web UI Port Changes

In HBase newer than 0.98.x, the HTTP ports used by the HBase Web UI changed from 60010 for the Master and 60030 for each RegionServer to 16010 for the Master and 16030 for the RegionServer.

If everything is set up correctly, you should be able to connect to the UI for the Master http://node-a.example.com:16010/ or the secondary master at http://node-b.example.com:16010/ for the secondary master, using a web browser. If you can connect via localhost but not from another host, check your firewall rules. You can see the web UI for each of the RegionServers at port 16030 of their IP addresses, or by clicking their links in