【原创】Oceanbase数据库三节点安装【未成功】

准备四台服务器（虚拟机也可）

1台OCP
3台OBServer

服务器要求：
CentOS 8
CPU 4C
内存 14G
磁盘1 100G
磁盘2 100G

准备软件

IP地址修改

这里以ocp为例，其它主机依葫芦画瓢，操作中需要修改计算机名，IP地址。

#配置主机名为246ApiGateWay
hostnamectl set-hostname ocp
#为网卡ens192设置IP地址
nmcli connection modify ens192 ipv4.addresses 192.168.240.76/20
#设置网关
nmcli connection modify ens192 ipv4.gateway 192.168.240.1
#设置DNS服务器
nmcli connection modify ens192 ipv4.dns  192.168.250.10,202.115.128.33,202.115.128.34
#设置IP方式为手动分配
nmcli connection modify ens192 ipv4.method manual
#禁用IPv6
nmcli connection modify ens192 ipv6.method disabled
#应用新的配置（接下来可能会断网一下，然后使用新IP地址连接）
nmcli connection up ens192

修改 .bash_profile文件

# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi

ob1=192.168.240.95
ob2=192.168.240.226
ob3=192.168.240.254
OBS=($ob1 $ob2 $ob3)

# User specific environment and startup programs

PATH=$PATH:$HOME/bin

export PATH

在里面定义了四个变量，ob1、ob2、ob3、OBS
分别对应三个OBserverIP地址，以及它们的数组

在ocp中为设置root免密码登录到ob1,ob2,ob3

#创建密钥
ssh-keygen -t rsa

#设置免密码登录
ssh-copy-id 'hostname -i'
ssh-copy-id $ob1
ssh-copy-id $ob2
ssh-copy-id $ob3

磁盘分区

 pvcreate /dev/sdb
 vgcreate obvg /dev/sdb
 lvcreate obvg -L 20G^C
 lvcreate -L 20G obvg -n lvredo
 lvcreate -l 100%FREE obvg -n lvdata
 mkfs.ext4 /dev/obvg/lvdata
 mkfs.ext4 /dev/obvg/lvredo

修改/etc/fstab 挂载磁盘

vi /etc/fstab

添加如下两句

/dev/obvg/lvredo  /redo   ext4  defaults,noatime,nodiratime,nodelalloc,barrier=0  0 0
/dev/obvg/lvdata  /data   ext4  defaults,noatime,nodiratime,nodelalloc,barrier=0  0 0

执行挂载，将用户设置为admin所拥有,其它服务器也如此配置

mkdir -p /data /redo
mount /data
mount /redo
useradd admin
echo 'admin:adminPWD123' | chpasswd
usermod admin -G wheel
chown -R admin.admin /data /redo

mount -a

修改/etc/sysctl.conf文件

[root@ob00 ~]# vi/etc/sysctl.conf
net.core.somaxconn = 2048
net.core.netdev_max_backlog = 10000
net.core.rmem_default = 16777216
net.core.wmem_default = 16777216
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216

net.ipv4.ip_local_port_range = 3500 65535
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.tcp_syncookies = 0
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_fin_timeout = 15
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_slow_start_after_idle=0

vm.swappiness = 0
vm.min_free_kbytes = 2097152
vm.max_map_count=655360
fs.aio-max-nr=1048576

将如上配置复制到其它主机

for ob in ${OBS[*]}; do scp /etc/security/limits.conf root@$ob:/etc/security/limits.conf; done

设置生效

ulimit -a
for ob in ${OBS[*]}; do ssh root@$ob "ulimit -a"; done

修改 /etc/security/limits.conf

vi /etc/security/limits.conf

* soft nofile 655360
* hard nofile 655360
* soft nproc 655360
* hard nproc 655360
* soft core unlimited
* hard core unlimited
* soft stack unlimited
* hard stack unlimited

复制到其他主机

for ob in ${OBS[*]}; do scp /etc/security/limits.conf root@$ob:/etc/security/limits.conf; done
sysctl -p
for ob in ${OBS[*]}; do ssh root@$ob "sysctl -p"; done

设置时间服务器

yum -y install chrony
for ob in ${OBS[*]}; do ssh root@$ob "yum -y install chrony"; done

chrony 配置

vi /etc/chrony.conf

将“# Please consider joining the pool (http://www.pool.ntp.org/join.html).”这一节的内容修改为（修改为其它的也可）：

server ntp.cloud.aliyuncs.com minpoll 4 maxpoll 10 iburst
server ntp.aliyun.com minpoll 4 maxpoll 10 iburst
server ntp1.aliyun.com minpoll 4 maxpoll 10 iburst
server ntp1.cloud.aliyuncs.com minpoll 4 maxpoll 10 iburst
server ntp10.cloud.aliyuncs.com minpoll 4 maxpoll 10 iburst
#使用ocp作为时间服务器
server 192.168.240.76

将时间配置复制到其它主机

for ob in ${OBS[*]}; do scp /etc/chrony.conf root@$ob:/etc/chrony.conf; done

启动时间服务

systemctl enable chronyd
systemctl start chronyd
chronyc activity
chronyc sources
chronyc sources -v
chronyc tracking
for ob in ${OBS[*]}; do ssh root@$ob "systemctl enable chronyd"; done
for ob in ${OBS[*]}; do ssh root@$ob "systemctl start chronyd"; done
for ob in ${OBS[*]}; do ssh root@$ob "chronyc activity"; done
for ob in ${OBS[*]}; do ssh root@$ob "chronyc sources"; done
for ob in ${OBS[*]}; do ssh root@$ob "chronyc sources -v"; done
for ob in ${OBS[*]}; do ssh root@$ob "chronyc tracking"; done

安装网络工具

yum install net-tools -y
for ob in ${OBS[*]}; do ssh root@$ob "yum install net-tools -y"; done

关闭和禁用防火墙

systemctl disable firewalld
systemctl stop firewalld
for ob in ${OBS[*]}; do ssh root@$ob "systemctl disable firewalld"; done
for ob in ${OBS[*]}; do ssh root@$ob "systemctl stop firewalld"; done

关闭和禁用SELINUX

setenforce 0
for ob in ${OBS[*]}; do ssh root@$ob "setenforce 0"; done

编辑 /etc/selinux/config

vi /etc/selinux/config

修改SELINUX=disabled即可

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected.
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

复制配置

for ob in ${OBS[*]}; do scp /etc/selinux/config root@$ob:/etc/selinux/config; done
for ob in ${OBS[*]}; do ssh root@$ob "reboot"; done
reboot

系统重新启动之后，SELINUX将不会启动

添加阿里yum源

yum install -y yum-utils
yum-config-manager --add-repo https://mirrors.aliyun.com/oceanbase/OceanBase.repo
for ob in ${OBS[*]}; do ssh root@$ob "yum install -y yum-utils"; done
for ob in ${OBS[*]}; do ssh root@$ob "yum-config-manager --add-repo https://mirrors.aliyun.com/oceanbase/OceanBase.repo"; done

安装 ob-deploy

ocp主机上安装即可，其它主机上无需安装

yum install -y ob-deploy

接下来使用切换为admin账户进行操作

su admin
cd

设置变量

这个su进去不起作用，所以每次需要设置

ob1=192.168.240.95
ob2=192.168.240.226
ob3=192.168.240.254
OBS=($ob1 $ob2 $ob3)

设置免密码登录

#创建密钥
ssh-keygen -t rsa

#设置免密码登录（单步执行）
ssh-copy-id 'hostname -i'
ssh-copy-id $ob1
ssh-copy-id $ob2
ssh-copy-id $ob3

创建三节点配置文件

注意修改IP地址(三处修改)、网卡

[admin@obce00 ~]$ vi obce-3zones.yaml

#  Only need to configure when remote login is required

user:
   username: admin
#    password: your password if need
   key_file: /home/admin/.ssh/id_rsa.pub
   port: your ssh port, default 22
#    timeout: ssh connection timeout (second), default 30
oceanbase-ce:
  servers:
    - name: obce01
      # Please don't use hostname, only IP can be supported
      ip: 192.168.240.95
    - name: obce02
      ip: 192.168.240.226
    - name: obce03
      ip: 192.168.240.254
  global:
    # Please set devname as the network adaptor's name whose ip is  in the setting of severs.
    # if set severs as "127.0.0.1", please set devname as "lo"
    # if current ip is 192.168.1.10, and the ip's network adaptor's name is "eth0", please use "eth0"
    devname: ens192
    cluster_id: 2
    # please set memory limit to a suitable value which is matching resource.
    memory_limit: 8G # The maximum running memory for an observer
    system_memory: 3G # The reserved system memory. system_memory is reserved for general tenants. The default value is 30G.
    stack_size: 512K
    cpu_count: 16
    cache_wash_threshold: 1G
    __min_full_resource_pool_memory: 268435456
    workers_per_cpu_quota: 10
    schema_history_expire_time: 1d
    # The value of net_thread_count had better be same as cpu's core number.
    net_thread_count: 4
    major_freeze_duty_time: Disable
    minor_freeze_times: 10
    enable_separate_sys_clog: 0
    enable_merge_by_turn: FALSE
    #datafile_disk_percentage: 20 # The percentage of the data_dir space to the total disk space. This value takes effect only when datafile_size is 0. The default value is 90.
    datafile_size: 50G
    syslog_level: WARN # System log level. The default value is INFO.
    enable_syslog_wf: false # Print system logs whose levels are higher than WARNING to a separate log file. The default value is true.
    enable_syslog_recycle: true # Enable auto system log recycling or not. The default value is false.
    max_syslog_file_count: 10 # The maximum number of reserved log files before enabling auto recycling. The default value is 0.
    # observer cluster name, consistent with obproxy's cluster_name
    appname: obce-3zones
    root_password: 0EI5N08d # root user password, can be empty
    proxyro_password: uY7Yf8zx # proxyro user pasword, consistent with obproxy's observer_sys_password, can be empty
  obce01:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882.
    #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/admin/oceanbase-ce
    # The directory for data storage. The default value is $home_path/store.
    data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    redo_dir: /redo
    zone: zone1
  obce02:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882.
    #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/admin/oceanbase-ce
    # The directory for data storage. The default value is $home_path/store.
    data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    redo_dir: /redo
    zone: zone2
  obce03:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882.
    #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/admin/oceanbase-ce
    # The directory for data storage. The default value is $home_path/store.
    data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    redo_dir: /redo
    zone: zone3
obproxy:
  servers:
    - 192.168.240.95
    - 192.168.240.226
    - 192.168.240.254
  # Set dependent components for the component.
  # When the associated configurations are not done, OBD will automatically get the these configurations from the dependent components.
  depends:
    - oceanbase-ce
  global:
    listen_port: 2883 # External port. The default value is 2883.
    prometheus_listen_port: 2884 # The Prometheus port. The default value is 2884.
    home_path: /home/admin/obproxy
    # oceanbase root server list
    # format: ip:mysql_port;ip:mysql_port
    rs_list: 192.168.240.95:2881;192.168.240.226:2881;192.168.240.254:2881
    enable_cluster_checkout: false
    # observer cluster name, consistent with oceanbase-ce's appname
    cluster_name: obce-3zones
    obproxy_sys_password: 0MdTv1tm # obproxy sys user password, can be empty
    observer_sys_password: uY7Yf8zx # proxyro user pasword, consistent with oceanbase-ce's proxyro_password, can be empty

部署集群

obd cluster deploy obce-3zones -c obce-3zones.yaml

错误处理1

Initializes observer work home x
[ERROR] fail to init obce01(192.168.240.95) data path: /data is not empty
[ERROR] fail to init obce02(192.168.240.226) data path: /data is not empty
[ERROR] fail to init obce03(192.168.240.254) data path: /data is not empty

新打开一个窗口，使用root登录ocp,执行

for ob in ${OBS[*]}; do ssh root@$ob "rm -rf /data/*"; done
for ob in ${OBS[*]}; do ssh root@$ob "rm -rf /home/admin/oceanbase-ce/*"; done

再次运行部署指令

启动集群

[admin@obce00 ~]$ obd cluster start obce-3zones

其它故障，，