jvm安全点(三)openjdk17 c++源码垃圾回收之安全点结束，唤醒线程

1. VMThread::inner_execute() - 触发安全点​​

cpp

复制

void VMThread::inner_execute(VM_Operation* op) { if (op->evaluate_at_safepoint()) { SafepointSynchronize::begin(); // 进入安全点，阻塞所有线程 // ...执行GC等操作... SafepointSynchronize::end(); // 结束安全点，唤醒线程 } }

• ​​功能​​：执行需要安全点的 VM 操作（如 GC）。
• ​​关键点​​：
  • SafepointSynchronize::begin()：暂停所有线程，进入安全点。
  • SafepointSynchronize::end()：完成 GC 后，调用此函数解除线程阻塞。

---

​​2. SafepointSynchronize::end() - 结束安全点​​

cpp

复制

void SafepointSynchronize::end() { disarm_safepoint(); // 核心：解除安全点 Universe::heap()->safepoint_synchronize_end(); // GC后清理 }

• ​​功能​​：安全点结束时的清理工作。
• ​​核心调用​​：disarm_safepoint() 负责恢复线程运行。

---

​​3. SafepointSynchronize::disarm_safepoint() - 解除安全点​​

cpp

复制

void SafepointSynchronize::disarm_safepoint() { _state = _not_synchronized; // 全局状态标记为非同步 Atomic::store(&_safepoint_counter, _safepoint_counter + 1); // 递增安全点ID // 恢复所有线程状态 for (JavaThread *current : JavaThreadIterator()) { current->safepoint_state()->restart(); // 标记线程为运行状态 } _wait_barrier->disarm(); // 唤醒阻塞的线程 Threads_lock->unlock(); // 解锁线程列表 }

• ​​功能​​：
  • 将全局安全点状态设置为 ​​非同步​​。
  • 更新安全点计数器，触发内存屏障保证可见性。
  • 遍历所有线程，调用 restart() 重置线程状态。
  • 调用屏障的 disarm() 方法唤醒所有线程。

---

​​4. LinuxWaitBarrier::disarm() - 唤醒线程​​

cpp

复制

void LinuxWaitBarrier::disarm() { _futex_barrier = 0; // 重置屏障值 syscall(SYS_futex, &_futex_barrier, FUTEX_WAKE_PRIVATE, INT_MAX); // 唤醒所有等待线程 }

• ​​功能​​：通过 Linux 的 futex 系统调用唤醒所有阻塞在安全点的线程。
• ​​关键点​​：
  • FUTEX_WAKE_PRIVATE：唤醒所有在 _futex_barrier 上等待的线程。
  • INT_MAX：唤醒最大数量的线程（实际唤醒所有等待的线程）。

---

​​5. 线程阻塞与唤醒机制​​

• ​​线程阻塞​​：
  • 在安全点开始时，线程通过 SafepointSynchronize::block() 调用 futex 的 FUTEX_WAIT 进入阻塞状态。

  cpp

  复制

  void SafepointSynchronize::block(JavaThread* thread) { _wait_barrier->wait(active_safepoint_id); // FUTEX_WAIT }

• ​​线程唤醒​​：
  • GC 完成后，disarm_safepoint() 调用 LinuxWaitBarrier::disarm()，通过 FUTEX_WAKE 唤醒所有阻塞线程。

---

​​总结​​

1. ​​安全点进入​​：GC 开始时，所有线程通过 futex 进入阻塞状态。
2. ​​GC 执行​​：VM 线程在安全点内执行垃圾回收。
3. ​​安全点退出​​：
   • 更新全局状态和计数器。
   • 重置每个线程的运行状态。
   • 调用 futex 的 FUTEX_WAKE 唤醒所有线程。
4. ​​线程恢复​​：被唤醒的线程继续执行后续代码。

这些代码是 ​​垃圾回收完成后解除线程阻塞的核心实现​​，通过操作系统提供的 futex 机制高效地管理线程的阻塞与唤醒。

 ##源码

void VMThread::inner_execute(VM_Operation* op) {
  assert(Thread::current()->is_VM_thread(), "Must be the VM thread");

  VM_Operation* prev_vm_operation = NULL;
  if (_cur_vm_operation != NULL) {
    // Check that the VM operation allows nested VM operation.
    // This is normally not the case, e.g., the compiler
    // does not allow nested scavenges or compiles.
    if (!_cur_vm_operation->allow_nested_vm_operations()) {
      fatal("Unexpected nested VM operation %s requested by operation %s",
            op->name(), _cur_vm_operation->name());
    }
    op->set_calling_thread(_cur_vm_operation->calling_thread());
    prev_vm_operation = _cur_vm_operation;
  }

  _cur_vm_operation = op;

  HandleMark hm(VMThread::vm_thread());
  EventMarkVMOperation em("Executing %sVM operation: %s", prev_vm_operation != NULL ? "nested " : "", op->name());

  log_debug(vmthread)("Evaluating %s %s VM operation: %s",
                       prev_vm_operation != NULL ? "nested" : "",
                      _cur_vm_operation->evaluate_at_safepoint() ? "safepoint" : "non-safepoint",
                      _cur_vm_operation->name());

  bool end_safepoint = false;
  if (_cur_vm_operation->evaluate_at_safepoint() &&
      !SafepointSynchronize::is_at_safepoint()) {
    SafepointSynchronize::begin();
    if (_timeout_task != NULL) {
      _timeout_task->arm();
    }
    end_safepoint = true;
  }

  evaluate_operation(_cur_vm_operation);

  if (end_safepoint) {
    if (_timeout_task != NULL) {
      _timeout_task->disarm();
    }
    SafepointSynchronize::end();
  }

  _cur_vm_operation = prev_vm_operation;
}

// Wake up all threads, so they are ready to resume execution after the safepoint
// operation has been carried out
void SafepointSynchronize::end() {
  assert(Threads_lock->owned_by_self(), "must hold Threads_lock");
  EventSafepointEnd event;
  assert(Thread::current()->is_VM_thread(), "Only VM thread can execute a safepoint");

  disarm_safepoint();

  Universe::heap()->safepoint_synchronize_end();

  SafepointTracing::end();

  post_safepoint_end_event(event, safepoint_id());
}


void SafepointSynchronize::disarm_safepoint() {
  uint64_t active_safepoint_counter = _safepoint_counter;
  {
    JavaThreadIteratorWithHandle jtiwh;
#ifdef ASSERT
    // A pending_exception cannot be installed during a safepoint.  The threads
    // may install an async exception after they come back from a safepoint into
    // pending_exception after they unblock.  But that should happen later.
    for (; JavaThread *cur = jtiwh.next(); ) {
      assert (!(cur->has_pending_exception() &&
                cur->safepoint_state()->is_at_poll_safepoint()),
              "safepoint installed a pending exception");
    }
#endif // ASSERT

    OrderAccess::fence(); // keep read and write of _state from floating up
    assert(_state == _synchronized, "must be synchronized before ending safepoint synchronization");

    // Change state first to _not_synchronized.
    // No threads should see _synchronized when running.
    _state = _not_synchronized;

    // Set the next dormant (even) safepoint id.
    assert((_safepoint_counter & 0x1) == 1, "must be odd");
    Atomic::release_store(&_safepoint_counter, _safepoint_counter + 1);

    OrderAccess::fence(); // Keep the local state from floating up.

    jtiwh.rewind();
    for (; JavaThread *current = jtiwh.next(); ) {
      // Clear the visited flag to ensure that the critical counts are collected properly.
      DEBUG_ONLY(current->reset_visited_for_critical_count(active_safepoint_counter);)
      ThreadSafepointState* cur_state = current->safepoint_state();
      assert(!cur_state->is_running(), "Thread not suspended at safepoint");
      cur_state->restart(); // TSS _running
      assert(cur_state->is_running(), "safepoint state has not been reset");
    }
  } // ~JavaThreadIteratorWithHandle

  // Release threads lock, so threads can be created/destroyed again.
  Threads_lock->unlock();

  // Wake threads after local state is correctly set.
  _wait_barrier->disarm();
}

// Guarantees any thread that called wait() will be awake when it returns.
  // Provides a trailing fence.
  void disarm() {
    assert(_owner == Thread::current(), "Not owner thread");
    _impl.disarm();
  }

// Guarantees any thread that called wait() will be awake when it returns.
  // Provides a trailing fence.
  void disarm() {
    assert(_owner == Thread::current(), "Not owner thread");
    _impl.disarm();
  }

void LinuxWaitBarrier::disarm() {
  assert(_futex_barrier != 0, "Should be armed/non-zero.");
  _futex_barrier = 0;
  int s = futex(&_futex_barrier,
                FUTEX_WAKE_PRIVATE,
                INT_MAX /* wake a max of this many threads */);
  guarantee_with_errno(s > -1, "futex FUTEX_WAKE failed");
}

static int futex(volatile int *addr, int futex_op, int op_arg) {
  return syscall(SYS_futex, addr, futex_op, op_arg, NULL, NULL, 0);
}

##gdb调试堆栈

#0  LinuxWaitBarrier::disarm (this=0x7fffc8000f18) at /home/yym/openjdk17/jdk17-master/src/hotspot/os/linux/waitBarrier_linux.cpp:53
#1  0x00007ffff696437b in WaitBarrierType<LinuxWaitBarrier>::disarm (this=0x7fffc8000f10) at /home/yym/openjdk17/jdk17-master/src/hotspot/share/utilities/waitBarrier.hpp:119
#2  0x00007ffff6960389 in SafepointSynchronize::disarm_safepoint () at /home/yym/openjdk17/jdk17-master/src/hotspot/share/runtime/safepoint.cpp:482
#3  0x00007ffff6960460 in SafepointSynchronize::end () at /home/yym/openjdk17/jdk17-master/src/hotspot/share/runtime/safepoint.cpp:492
#4  0x00007ffff6c3569c in VMThread::inner_execute (this=0x7ffff021b760, op=0x7ffff7bfe350) at /home/yym/openjdk17/jdk17-master/src/hotspot/share/runtime/vmThread.cpp:421
#5  0x00007ffff6c35a27 in VMThread::loop (this=0x7ffff021b760) at /home/yym/openjdk17/jdk17-master/src/hotspot/share/runtime/vmThread.cpp:482
#6  0x00007ffff6c349f8 in VMThread::run (this=0x7ffff021b760) at /home/yym/openjdk17/jdk17-master/src/hotspot/share/runtime/vmThread.cpp:162
#7  0x00007ffff6b5a805 in Thread::call_run (this=0x7ffff021b760) at /home/yym/openjdk17/jdk17-master/src/hotspot/share/runtime/thread.cpp:394
#8  0x00007ffff6874aeb in thread_native_entry (thread=0x7ffff021b760) at /home/yym/openjdk17/jdk17-master/src/hotspot/os/linux/os_linux.cpp:720
#9  0x00007ffff7c94ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
#10 0x00007ffff7d26850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81