zephyr操作系统中nrf5340的引脚高低设置

 

测试路径:zephyr\samples\hello_world

 

 

1.  nrf5340dk_nrf5340_cpuapp.overlay文件的修改

/ {	
	buttons {
		compatible = "gpio-keys";
		
		/*p0.23*/
		M_BUTTON1: m_button1 {
			gpios = <&gpio0 23 (GPIO_PULL_UP|GPIO_ACTIVE_LOW)>;
			label = "M_BUTTON1";
		};
		/*p*/
		M_BUTTON2: m_button2 {
			gpios = <&gpio1 6 (GPIO_PULL_UP|GPIO_ACTIVE_LOW)>;
			label = "M_BUTTON2";
		};		
	};
    /*gpio 的引脚设置*/
	m_gpio {    
		compatible = "gpio-leds";
		M_GPIO1: m_gpio1 {
			gpios = <&gpio0 26 (GPIO_PULL_UP|GPIO_ACTIVE_LOW)>;
			label = "M_GPIO1";
		};	
	};
};

2.prj.conf文件的修改

CONFIG_GPIO=y

3.main.c文件的修改

#include <drivers/gpio.h>
#include <hal/nrf_gpio.h>

#define   gpio_1_PORT  DT_GPIO_LABEL(DT_NODELABEL(m_gpio1), gp