满意答案
灵感Inspired
2016.08.23
采纳率:40% 等级:9
已帮助:770人
RN reconfiguration The purpose of this procedure is to configure/reconfigure the RN subframe configuration and/or to update the system information relevant for the RN in RRC_CONNECTED. 5.9.1.2 Initiation E-UTRAN may initiate the RN reconfiguration procedure to an RN in RRC_CONNECTED when AS security has been activated. 5.9.1.3 Reception of an RNReconfiguration The RN shall: 1> if the systemInfoChange is included: 2> if the systemInformationBlockType1 is included: 3> act upon the received SystemInformationBlockType1 as specified in 5.2.2.7; 2> if the SystemInformationBlockType2 is included: 3> act upon the received SystemInformationBlockType2 as specified in 5.2.2.9; 1> if the rn-SubframeConfig is included: 2> reconfigure lower layers in accordance with the received FDD-SubframeConfig or TDD-SubframeConfig; 2> if the rpdcch-Config is included: 3> reconfigure lower layers in accordance with the received rpdcch-Config; 1> submit the RNReconfigurationComplete message to lower layers for transmission, upon which the procedure ends;
00分享举报