本文主要介绍了华为交换机IPv6路由配置结果的查看与验证方法。通过display ipv6 routing - table命令查看SwitchA的IPv6路由表，还使用Ping和Tracert命令分别对网络连通性和路由路径进行验证，展示了详细的操作过程和结果。
查看配置结果
# 查看SwitchA的IPv6路由表。
[SwitchA]display ipv6 routing-table
Routing Table : Public
Destinations : 7 Routes : 7
Destination : :: PrefixLength : 0
NextHop : FC00:0:0:2010::2 Preference : 60
Cost : 0 Protocol : Static
RelayNextHop : :: TunnelID : 0x0
Interface : Vlanif20 Flags : D
Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : InLoopBack0 Flags : D
Destination : FC00:0:0:2001:: PrefixLength : 64
NextHop : FC00:0:0:2001::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : Vlanif10 Flags : D
Destination : FC00:0:0:2001::1 PrefixLength : 128
NextHop : ::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : Vlanif10 Flags : D
Destination : FC00:0:0:2010:: PrefixLength : 64
NextHop : FC00:0:0:2010::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : Vlanif20 Flags : D
Destination : FC00:0:0:2010::1 PrefixLength : 128
NextHop : ::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : Vlanif20 Flags : D
Destination : FE80:: PrefixLength : 10
NextHop : :: Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : NULL0 Flags : D
# 使用Ping进行验证。
[SwitchA] ping ipv6 fc00:0:0:2003::1
PING fc00:0:0:2003::1 : 56 data bytes, press CTRL_C to break
Reply from FC00:0:0:2003::1
bytes=56 Sequence=1 hop limit=63 time = 63 ms
Reply from FC00:0:0:2003::1
bytes=56 Sequence=2 hop limit=63 time = 62 ms
Reply from FC00:0:0:2003::1
bytes=56 Sequence=3 hop limit=63 time = 62 ms
Reply from FC00:0:0:2003::1
bytes=56 Sequence=4 hop limit=63 time = 63 ms
Reply from FC00:0:0:2003::1
bytes=56 Sequence=5 hop limit=63 time = 63 ms
--- fc00:0:0:2003::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 62/62/63 ms
# 使用Tracert进行验证。
[SwitchA]tracert ipv6 fc00:0:0:2003::1
traceroute to fc00:0:0:2003::1 30 hops max,60 bytes packet
1 FC00:0:0:2010::2 31 ms 32 ms 31 ms
2 FC00:0:0:2003::1 62 ms 63 ms 62 ms
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
