poj 3253 Fence Repair(priority_queue)

最新推荐文章于 2024-10-29 21:24:58 发布

weixin_30319097

最新推荐文章于 2024-10-29 21:24:58 发布

阅读量61

点赞数

文章标签：数据结构与算法

原文链接：http://www.cnblogs.com/qinduanyinghua/p/5801192.html

版权

Fence Repair

Time Limit: 2000MS		Memory Limit: 65536K
Total Submissions: 40465		Accepted: 13229

Description

Farmer John wants to repair a small length of the fence around the pasture. He measures the fence and finds that he needs N (1 ≤ N ≤ 20,000) planks of wood, each having some integer length L_i (1 ≤ L_i ≤ 50,000) units. He then purchases a single long board just long enough to saw into the N planks (i.e., whose length is the sum of the lengths L_i). FJ is ignoring the "kerf", the extra length lost to sawdust when a sawcut is made; you should ignore it, too.

FJ sadly realizes that he doesn't own a saw with which to cut the wood, so he mosies over to Farmer Don's Farm with this long board and politely asks if he may borrow a saw.

Farmer Don, a closet capitalist, doesn't lend FJ a saw but instead offers to charge Farmer John for each of the N-1 cuts in the plank. The charge to cut a piece of wood is exactly equal to its length. Cutting a plank of length 21 costs 21 cents.

Farmer Don then lets Farmer John decide the order and locations to cut the plank. Help Farmer John determine the minimum amount of money he can spend to create the N planks. FJ knows that he can cut the board in various different orders which will result in different charges since the resulting intermediate planks are of different lengths.

Input

Line 1: One integer N, the number of planks
Lines 2..N+1: Each line contains a single integer describing the length of a needed plank

Output

Line 1: One integer: the minimum amount of money he must spend to make N-1 cuts

Sample Input

Sample Output

Hint

He wants to cut a board of length 21 into pieces of lengths 8, 5, and 8.
The original board measures 8+5+8=21. The first cut will cost 21, and should be used to cut the board into pieces measuring 13 and 8. The second cut will cost 13, and should be used to cut the 13 into 8 and 5. This would cost 21+13=34. If the 21 was cut into 16 and 5 instead, the second cut would cost 16 for a total of 37 (which is more than 34).

大致题意：

有一个农夫要把一个木板钜成几块给定长度的小木板，每次锯都要收取一定费用，这个费用就是当前锯的这个木版的长度

给定各个要求的小木板的长度，及小木板的个数n，求最小费用

提示：

以

5 8 5为例：

先从无限长的木板上锯下长度为 21 的木板，花费 21

再从长度为21的木板上锯下长度为5的木板，花费5

再从长度为16的木板上锯下长度为8的木板，花费8

总花费 = 21+5+8 =34

解题思路：

利用Huffman思想，要使总费用最小，那么每次只选取最小长度的两块木板相加，再把这些“和”累加到总费用中即可

因为朴素的HuffmanTree思想是：

（1）先把输入的所有元素升序排序，再选取最小的两个元素，把他们的和值累加到总费用

（2）把这两个最小元素出队，他们的和值入队，重新排列所有元素，重复（1），直至队列中元素个数<=1，则累计的费用就是最小费用

HuffmanTree超时的原因是每次都要重新排序，极度浪费时间，即使是用快排。

一个优化的处理是：

（1）只在输入全部数据后，进行一次升序排序 (以后不再排序)

（2）队列指针p指向队列第1个元素，然后取出队首的前2个元素，把他们的和值累计到总费用，再把和值sum作为一个新元素插入到队列适当的位置

由于原队首的前2个元素已被取出，因此这两个位置被废弃，我们可以在插入操作时，利用后一个元素位置，先把队列指针p+1，使他指向第2个废弃元素的位置，然后把sum从第3个位置开始向后逐一与各个元素比较，若大于该元素，则该元素前移一位，否则sum插入当前正在比较元素（队列中大于等于sum的第一个元素）的前一个位置

（3）以当前p的位置作为新队列的队首，重复上述操作

另一种处理方法是利用STL的优先队列，priority_queue，非常方便简单高效，虽然priority_queue的基本理论思想还是上述的优化思想，但是STL可以直接用相关的功能函数实现这些操作，相对简单，详细参见我的程序。

注意priority_queue与qsort的比较规则的返回值的意义刚好相反

第一种方法:时间复杂度O(N*N)

将数组中最小的两个数放在数组前两个位置，将相加得到的结果和数组的最后一个元素放到数组前两个位置，并且是数组逻辑上减1。知道数组逻辑长度 <= 1.

#include <iostream>
#include <cstdio>
#include <algorithm>
using namespace std;
typedef long long ll;

int N, L[20000];

void solve(){
    ll ans = 0;
    if(N == 1){
        ans = L[0];
    }
    while(N > 1){
        int mii1 = 0, mii2 = 1;
        //保持数组第一个最短，第二个次短 
        if(L[mii1] > L[mii2])
            swap(L[mii1], L[mii2]);
        for(int i = 2; i < N; i++){
            if(L[i] < L[mii1]){
                swap(L[i], L[mii2]);
                swap(L[mii1], L[mii2]);
            } else if(L[i] < L[mii2]){
                swap(L[i], L[mii2]);
            }
        }
        int t = L[mii1] + L[mii2];
        ans += t;
        L[mii1] = t;
        L[mii2] = L[N-1];
        N--;
    }
    printf("%lld\n", ans);
}    

int main(){
    while(scanf("%d", &N) != EOF){
        for(int i = 0; i < N; i++)
            scanf("%d", &L[i]);
        solve();
    }
    return 0;
}

第二种方法：时间复杂度O（N*logN）

由于只需从板的集合里取出最短的两块，并且把长度为两板块长度之和的板加入集合中即可，因此使用优先队列(原理：用到了堆这个数据结构）就可以高效地实现。一共需要进行O(N)次O(logN)的操作，因此总的时间复杂度是O(N*logN)。（优先队列的插入和弹出即是堆的插入和移除），有最大优先队列和最小优先队列。

这里直接用stl里的优先队列priority_queue（默认是最大优先队列，即取出的是最大值）

 1 #include <iostream>
 2 #include <cstdio>
 3 #include <algorithm>
 4 #include <queue>
 5 using namespace std;
 6 typedef long long ll;
 7 //输入 
 8 int N, L[20000];
 9 
10 void solve(){
11     ll ans = 0;
12     //声明一个从小到大取出数值的优先队列 
13     priority_queue<int, vector<int>, greater<int> > que;
14     for(int i = 0; i < N; i++){
15         que.push(L[i]);
16     }
17     //循环到只剩一块木板为止 
18     while(que.size() > 1){
19         int l1, l2;
20         //取出最短的木板和次短的木板 
21         l1 = que.top();
22         que.pop();
23         l2 = que.top();
24         que.pop();
25         //把两块木板合并 
26         ans += l1 + l2;
27         que.push(l1 + l2);
28     }
29 
30     printf("%lld\n", ans);
31 }
32 
33 int main(){
34     while(scanf("%d", &N) != EOF){
35         for(int i = 0; i < N; i++)
36             scanf("%d", &L[i]);
37         solve();
38     }
39     return 0;
40 }