ip设置 net 与 宿主机器 虚拟机_CentOS7宿主机设置DHCP服务器分配IPv6给虚拟机

前言

懒….反正就是云筏KVM分配公网IPv6给KVM的实现方式，zkeys不支持IPv6所以我们只能自己来了…

宿主机配置

网卡配置

共网网桥 2a01:4f8:212:1c60::1/128 网关为公网网关

内网网桥 2a01:4f8:212:1c60::1/64 网关留空

路由配置

简单来说2a01:4f8:212:1c60::1/64全部走内网网桥，其余流量走公网网桥

ip -6 route自己看看del还是add

安装和配置DHCP服务

yum install dhcp -y

cp /usr/share/doc/dhcp-4.2.5/dhcpd6.conf.example /etc/dhcp/dhcpd6.conf

#覆盖掉

然后就是配置DHCPv6的网段了，先看看官方给的例子：

[root@HPC-FSN1-M103 ~]# cat /etc/dhcp/dhcpd6.conf

# Server configuration file example for DHCPv6

# From the file used for TAHI tests.

# IPv6 address valid lifetime

# (at the end the address is no longer usable by the client)

# (set to 30 days, the usual IPv6 default)

default-lease-time 2592000;

# IPv6 address preferred lifetime

# (at the end the address is deprecated, i.e., the client should use

# other addresses for new connections)

# (set to 7 days, the usual IPv6 default)

preferred-lifetime 604800;

# T1, the delay before Renew

# (default is 1/2 preferred lifetime)

# (set to 1 hour)

option dhcp-renewal-time 3600;

# T2, the delay before Rebind (if Renews failed)

# (default is 3/4 preferred lifetime)

# (set to 2 hours)

option dhcp-rebinding-time 7200;

# Enable RFC 5007 support (same than for DHCPv4)

allow leasequery;

# Global definitions fo