Kim Schrijvers
Consider an ordered set S of strings of N (1 <= N <= 31) bits. Bits, of course, are either 0 or 1.
This set of strings is interesting because it is ordered and contains all possible strings of length N that have L (1 <= L <= N) or fewer bits that are `1'.
Your task is to read a number I (1 <= I <= sizeof(S)) from the input and print the Ith element of the ordered set for N bits with no more than L bits that are `1'.
PROGRAM NAME: kimbits
INPUT FORMAT
A single line with three space separated integers: N, L, and I.
SAMPLE INPUT (file kimbits.in)
5 3 19
OUTPUT FORMAT
A single line containing the integer that represents the Ith element from the order set, as described.
SAMPLE OUTPUT (file kimbits.out)
10011
思路:用组合做,如原题的5 3 19 那10011怎么来的呢, 也就说有5个位,你可以选3个是1,2个是1,1个是1不选1总情况数为26种而19<26,那看下一位,即是
4位里选3位(即是假设输入是 4 3 19)那就是有4位可选3个1,2个1,1个1,0个1总情况数为19>15说明4位装不下,不到19个那么第5位一定得是1,
即是1xxxx(x代表未知)假设m为输入的I,m原先等于19,当第5位确定为1后m=m-15=4;那原题转化为求4 2 4的输出只要求出4 2 4的输出,也就是求1xxxx
后面的四个x;同样的3位可选2个1,1个1,0个1 有7>4;也就是说3位可以装的下那第四位就为0,原题转化为求3, 2 4的输出即是求10XXX后面的三个未知数,重复操作
直到m化为0,得到结果。
注意点:31位,貌似int存会出错,C(n,m)=C(n,m-1)+C(n-1,m-1);dp(n,m)=C(n,m)+dp(n-1,m);
/*
ID:nealgav1
LANG:C++
PROG:kimbits
*/
#include<fstream>
using namespace std;
ifstream cin("kimbits.in");
ofstream cout("kimbits.out");
long long cc[55][55];///组合算C(n,m);m里取n
long long dp[55][55];///算dp(n,m)=C(n,m)+C(n-1,m)+...+C(0,m);
char s[55];///存2进制答案
long long C(int aa,int bb)
{
cc[0][0]=1;dp[0][0]=1;
for(int i=1;i<=bb;i++)
{ cc[0][i]=1;dp[0][i]=1;
for(int j=1;j<=i;j++)
{cc[j][i]=cc[j][i-1]+cc[j-1][i-1];
dp[j][i]=cc[j][i]+dp[j-1][i];
}
}
}
int main()
{
int b,a;
long long m;
cin>>b>>a>>m;
s[b]='\0';
C(a+1,b+1);
int j;
for(int i=b;i>=0;i--)
{ if(i>a)j=a;
else j=i;
if(m>0)
{ ///当i为不够放时i+1位为1,同时减去i位能存量
if(dp[j][i]<m){m-=dp[j][i];s[b-i-1]='1';a--;}
else s[b-i-1]='0';
}
else s[b-i-1]='0';
}
//if(m)s[b-1]='1';
cout<<s<<endl;
}
USER: Neal Gavin Gavin [nealgav1] TASK: kimbits LANG: C++ Compiling... Compile: OK Executing... Test 1: TEST OK [0.000 secs, 3404 KB] Test 2: TEST OK [0.000 secs, 3404 KB] Test 3: TEST OK [0.000 secs, 3404 KB] Test 4: TEST OK [0.000 secs, 3404 KB] Test 5: TEST OK [0.000 secs, 3404 KB] Test 6: TEST OK [0.000 secs, 3404 KB] Test 7: TEST OK [0.000 secs, 3404 KB] Test 8: TEST OK [0.000 secs, 3404 KB] Test 9: TEST OK [0.000 secs, 3404 KB] Test 10: TEST OK [0.000 secs, 3404 KB] Test 11: TEST OK [0.000 secs, 3404 KB] Test 12: TEST OK [0.000 secs, 3404 KB] Test 13: TEST OK [0.000 secs, 3404 KB] All tests OK.
Your program ('kimbits') produced all correct answers! This is your submission #3 for this problem. Congratulations!
Here are the test data inputs:
------- test 1 ---- 4 2 1 ------- test 2 ---- 1 1 2 ------- test 3 ---- 8 4 30 ------- test 4 ---- 10 2 56 ------- test 5 ---- 7 7 64 ------- test 6 ---- 18 3 300 ------- test 7 ---- 21 10 1048576 ------- test 8 ---- 24 20 12936478 ------- test 9 ---- 31 24 10000000 ------- test 10 ---- 31 31 2147483648 ------- test 11 ---- 31 26 12345678 ------- test 12 ---- 31 26 123456789 ------- test 13 ---- 31 26 1234567890Keep up the good work!
Russ Cox
Suppose we knew how to calculate the size of the set of binary numbers for a given nbits and nones. That is, suppose we have a function sizeofset(n, m) that returns the number of n-bit binary numbers that have at most m ones in them.
Then we can solve the problem as follows. We're looking for the ith element in the set of size n with m bits. This set has two parts: the numbers the start with zero, and the numbers that start with one. There are sizeofset(n-1, m) numbers that start with zero and have at most m one bits, and there are sizeofset(n-1, m-1) numbers that start with one and have at most m one bits.
So if the index is less than sizeofset(n-1, m), the number in question occurs in the part of the set that is numbers that start with zero. Otherwise, it starts with a one.
This lends itself to a nice recursive solution, implemented by "printbits".
The only difficult part left is calculating "sizeofset". We can do this by dynamic programming using the property described above:
sizeofset(n, m) = sizeofset(n-1, m) + sizeofset(n-1, m-1)
and sizeofset(0, m) = 1 for all m. We use double's throughout for bits, but that's overkill given the rewritten problem that requires only 31 bits intead of 32.
/* PROG: kimbits ID: rsc001 */ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <assert.h> FILE *fout; /* calculate binomial coefficient (n choose k) */ double sizeofset[33][33]; void initsizeofset(void) { int i, j; for(j=0; j<=32; j++) sizeofset[0][j] = 1; for(i=1; i<=32; i++) for(j=0; j<=32; j++) if(j == 0) sizeofset[i][j] = 1; else sizeofset[i][j] = sizeofset[i-1][j-1] + sizeofset[i-1][j]; } void printbits(int nbits, int nones, double index) { double s; if(nbits == 0) return; s = sizeofset[nbits-1][nones]; if(s <= index) { fprintf(fout, "1"); printbits(nbits-1, nones-1, index-s); } else { fprintf(fout, "0"); printbits(nbits-1, nones, index); } } void main(void) { FILE *fin; int nbits, nones; double index; fin = fopen("kimbits.in", "r"); fout = fopen("kimbits.out", "w"); assert(fin != NULL && fout != NULL); initsizeofset(); fscanf(fin, "%d %d %lf", &nbits, &nones, &index); printbits(nbits, nones, index-1); fprintf(fout, "\n"); exit(0); }