将程序从Flash搬运到RAM中运行总结(转载)

 

1. 在CMD文件中配置相应的段，如

ramfuncs            : LOAD = FLASHJ,  PAGE = 0

                    RUN = RAMH0,  PAGE = 0

                    LOAD_START(_RamfuncsLoadStart),

                    LOAD_END(_RamfuncsLoadEnd),

                    RUN_START(_RamfuncsRunStart)

secureRamFuncs    :   LOAD = FLASHP,   PAGE = 0          /* Used by InitFlash() in SysCtrl.c */

                         RUN =  RAMH0 ,   PAGE = 0

                         LOAD_START(_secureRamFuncs_loadstart),

                         LOAD_END(_secureRamFuncs_loadend),

                         RUN_START(_secureRamFuncs_runstart)