[No0000183]Parallel Programming with .NET-How PLINQ processes an IEnumerable<T> on multiple cores

As Ed Essey explained in Partitioning in PLINQ, partitioning is an important step in PLINQ execution. Partitioning splits up a single input sequence into multiple sequences that can be processed in parallel. This post further explains chunk partitioning, the most general partitioning scheme that works on any IEnumerable<T>.

Chunk partitioning appears in two places in Parallel Extensions. First, it is one of the algorithms that PLINQ uses under the hood to execute queries in parallel. Second, chunk partitioning is available as a standalone algorithm through the Partitioner.Create() method.

To explain the design of the chunk partitioning algorithm, let’s walk through the possible ways of processing an IEnumerable<T> with multiple worker threads, finally arriving at the solution used in PLINQ (approach 4).

Approach 1: Load the input sequence into an intermediate array

As a simple solution, we could walk over the input sequence and store all elements into an array. Then, we can split up the array into ranges, and assign each range to a different worker.

The disadvantage of this approach is that we need to allocate an array large enough to store all input elements. If the input sequence is long, this will algorithm leads to unnecessarily large memory consumption. Also, we need to wait until the entire input sequence is ready before the workers can start executing.

Approach 2: Hand out elements to threads on demand

An entirely different approach is to have all worker threads share one input enumerator. When a worker is ready to process the next input element, it takes a shared lock, gets the next element from the input enumerator, and releases the lock.

This algorithm has a fairly large overhead because processing every element requires locking. Also, handing out elements individually is prone to poor cache behavior.

This approach does have an interesting advantage over Approach 1, though: since workers receive data on demand, the workers that finish faster will come back to request more work. In contrast, Approach 1 splits up all work ahead of time, and a worker that is done early simply goes away.

Approach 3: Hand out elements in chunks

To mitigate the two drawbacks of Approach 2 (synchronization cost and cache behavior), we can hand out elements to threads in “chunks”. When a thread is ready to process more inputs, it will take say 64 elements from the input enumerator.

Unfortunately, while this approach nicely amortizes the synchronization cost over multiple elements, it does not work well for short inputs. For example, if the input contains 50 elements and the chunk size is 64, all inputs will go into a single partition. Even if the work per element is large, we will not be able to benefit from parallelism, since one worker gets all the work.

And since IEnumerable<T> in general does not declare its length, we cannot simply tune the chunk size based on the input sequence length.

Approach 4: Hand out elements in chunks of increasing size

A solution to the problem with small inputs is to use chunks of a growing size. The first chunk assigned to each thread is of size 1 and subsequent chunks are gradually larger, until a specific threshold is reached.

Our solution doubles the chunk size every few chunks. So, each thread first receives a few chunks of size 1, then a few chunks of size 2, then 4, and so forth. Once the chunk size reaches a certain threshold, it remains constant.

This chunking strategy ensures that if the input is short, it will still get split up fairly among the cores. But, the chunk size also grows fairly quickly, and the per-chunk overheads are small for large inputs. Also, the algorithm is quite good at load-balancing, so if one worker is taking longer to process its inputs, other workers will process more elements to decrease the overall processing time.

One interesting consequence of the chunk partitioning algorithm is that multiple threads will call MoveNext() on the input enumerator. The worker threads will use a lock to ensure mutual exclusion, but the enumerator must not assume that MoveNext() will be called from a particular thread (e.g., it should not use thread-local storage, manipulate UI, etc).

The current implementation of both PLINQ chunk partitioning and Partitioner.Create() follows approach 4 fairly closely. Now you know how it behaves and why!

正如Ed Essey 在PLINQ中的Partitioning中所解释的那样，分区是PLINQ执行中的重要一步。分区将单个输入序列拆分为可以并行处理的多个序列。这篇文章进一步解释了块分区，这是一种适用于任何IEnumerable <T>的最常用的分区方案。

块分区出现在Parallel Extensions中的两个位置。首先，它是PLINQ在引擎盖下用于并行执行查询的算法之一。其次，块分区可通过Partitioner.Create（）方法作为独立算法使用。

为了解释块分区算法的设计，让我们来看看处理具有多个工作线程的IEnumerable <T>的可能方法，最后得出PLINQ中使用的解决方案（方法4）。

方法1：将输入序列加载到中间阵列中

作为一个简单的解决方案，我们可以遍历输入序列并将所有元素存储到数组中。然后，我们可以将数组拆分为范围，并将每个范围分配给不同的工作人员。

这种方法的缺点是我们需要分配一个足够大的数组来存储所有输入元素。如果输入序列很长，这将导致不必要的大量内存消耗。此外，我们需要等到整个输入序列准备就绪，然后工人才能开始执行。

方法2：根据需要将元素分发给线程

一种完全不同的方法是让所有工作线程共享一个输入枚举器。当一个worker准备处理下一个输入元素时，它需要一个共享锁，从输入枚举器获取下一个元素，然后释放锁。

该算法具有相当大的开销，因为处理每个元素都需要锁定。此外，单独分发元素容易导致缓存行为不良。

然而，这种方法确实比方法1具有一个有趣的优势：由于工作人员按需接收数据，因此工作得更快的工作人员将回来请求更多的工作。相比之下，方法1提前将所有工作分开，而早期完成的工人就会消失。

方法3：以块的形式分发元素

为了缓解方法2的两个缺点（同步成本和缓存行为），我们可以将元素分发给“块”中的线程。当线程准备好处理更多输入时，它将从输入枚举器中获取64个元素。

不幸的是，虽然这种方法可以很好地分摊多个元素的同步成本，但它对短输入效果不佳。例如，如果输入包含50个元素且块大小为64，则所有输入将进入单个分区。即使每个元素的工作量很大，我们也无法从并行性中受益，因为一个工作者可以完成所有工作。

并且由于IEnumerable <T>通常不会声明其长度，因此我们不能简单地根据输入序列长度调整块大小。

方法4：分发大小不断增加的元素

小输入问题的解决方案是使用不断增长的大小的块。分配给每个线程的第一个块大小为1，后续块逐渐变大，直到达到特定阈值。

我们的解决方案每隔几个块就会使块大小翻倍。因此，每个线程首先接收一些大小为1的块，然后是几个大小为2的块，然后是4块，依此类推。一旦块大小达到某个阈值，它就保持不变。

这种分块策略可确保如果输入很短，它仍会在核心之间公平分配。但是，块大小也相当快地增长，并且对于大输入，每块大小的开销很小。此外，该算法非常擅长负载平衡，因此如果一个工作人员花费更长的时间来处理其输入，则其他工作人员将处理更多元素以减少整体处理时间。

块分区算法的一个有趣结果是多个线程将在输入枚举器上调用MoveNext（）。工作线程将使用锁来确保互斥，但是枚举器不能假设将从特定线程调用MoveNext（）（例如，它不应该使用线程本地存储，操纵UI等）。

PLINQ块分区和Partitioner.Create（）的当前实现非常接近方法4。现在你知道它的行为和原因了！

 

转载于:https://www.cnblogs.com/Chary/p/No0000183.html