RationalDMIS 2024两（圆）点拟合直线

登录后复制

$$/*  Header
DMISMN/'Created by [山涧果子]
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/PROG, MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, 20.0000
RECALL/D(MCS)
SNSLCT/S(D2-L30)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, COMPLM
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/MAN
F(PLN1)=FEAT/PLANE,CART,472.3793,233.6820,58.1890,-0.0012,0.0005,1.0000
$$ Measurement points are created through actual points
MEAS/PLANE, F(PLN1), 3
  PTMEAS/CART, 448.3190, 220.2653, 58.1665, -0.0012, 0.0005, 1.0000
  PTMEAS/CART, 448.3145, 276.3071, 58.1388, -0.0012, 0.0005, 1.0000
  PTMEAS/CART, 520.5043, 204.4737, 58.2617, -0.0012, 0.0005, 1.0000
ENDMES
F(LN1)=FEAT/LINE,BND,CART,448.6904,194.2402,38.3690,510.2415,194.4149,38.3704,0.0028,-1.0000,0.0000
$$ Measurement points are created through actual points
MEAS/LINE, F(LN1), 2
  PTMEAS/CART, 448.6904, 194.2402, 38.3690, 0.0028, -1.0000, 0.0000
  PTMEAS/CART, 510.2415, 194.4149, 38.3704, 0.0028, -1.0000, 0.0000
ENDMES
F(PT1)=FEAT/POINT,CART,443.5055,211.3867,52.8091,-1.0000,0.0000,0.0000
MEAS/POINT, F(PT1), 1
  PTMEAS/CART, 443.5055,211.3867,52.8091,-1.0000,0.0000,0.0000
ENDMES
D(CRD1) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN1), XDIR, YORIG, FA(PT1), XORIG
D(CRD1) = TRANS/ZORIG, -35, YORIG, -0, XORIG, -0
$$ Set.CAD2PCS.CADM_1
MODE/PROG,MAN

SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, FA(PLN1), 20.0000

F(PLN2)=FEAT/PLANE,CART,48.7916,51.3868,35.0004,0.0001,0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.9830, 17.1395, 55.9924
MEAS/PLANE, F(PLN2), 4

  
  GOTO/CART,    -2.9830, 17.1395, 55.9924 
  
  GOTO/CART,     4.8999, 26.5557, 55.9924
  PTMEAS/CART,   4.8999, 26.5557, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,   3.5497, 84.1260, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 100.7267, 85.9907, 35.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  86.0091,  8.8833, 35.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(LN2)=FEAT/LINE,BND,CART,-0.0000,-0.0000,20.0208,70.0000,-0.0000,20.0208,-0.0000,-1.0000,0.0000
$$ Measurement points are created through nominal points
MEAS/LINE, F(LN2), 5

  GOTO/CART,   86.0059,  8.8648, 55.9924
  
  GOTO/CART,    2.0000, -2.9924, 55.9924
  PTMEAS/CART,  2.0000, -0.0000, 17.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 18.5000, -0.0000, 17.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 35.0000, -0.0000, 17.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 51.5000,  0.0000, 17.0208, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 68.0000,  0.0000, 17.0208, 0.0000, -1.0000, 0.0000
  
  GOTO/CART,   68.0000, -2.9924, 55.9924
ENDMES
F(LN3)=FEAT/LINE,BND,CART,-0.0000,14.9792,35.0000,0.0000,93.6212,35.0000,-1.0000,0.0000,-0.0000

$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.9924, 16.9792, 55.9924
MEAS/LINE, F(LN3), 5
  GOTO/CART,   -2.9924, 16.9792, 55.9924
  PTMEAS/CART,  0.0000, 16.9792, 32.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART, -0.0000, 35.6397, 32.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART, -0.0000, 54.3002, 32.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 72.9607, 32.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 91.6212, 32.0000, -1.0000, 0.0000, 0.0000
  GOTO/CART,   -2.9924, 91.6212, 55.9924
ENDMES
F(PT_INTR1)=FEAT/POINT,CART,0.0000,-0.0000,17.0238,0.0000,0.0000,1.0000
CONST/POINT,F(PT_INTR1),INTOF,FA(LN2),FA(LN3),2D
D(CRD2) = DATSET/FA(PLN2), ZDIR, ZORIG, FA(LN2), XDIR, FA(PT_INTR1), XORIG
D(CRD2) = TRANS/ZORIG, -35, YORIG, FA(PT_INTR1), XORIG, -0
$$ Set.CAD2PCS.CADM_1
F(PLN3)=FEAT/PLANE,CART,31.2500,46.8106,35.0000,-0.0000,0.0000,1.0000
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 5.0000
SNSET/CLRSRF, F(PLN3), 20.0000
F(CIR1)=FEAT/CIRCLE,INNER,CART,8.0000,55.0000,32.0000,-0.0000,0.0000,1.0000, 10.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -3.0409, 91.5923, 55.9924
MEAS/CIRCLE, F(CIR1), 4
  GOTO/CART,   -3.0409, 91.5923, 55.9924
  GOTO/CART,    5.9924, 55.0000, 55.9924
  PTMEAS/CART,  3.0000, 55.0000, 32.0000,  1.0000, -0.0000, -0.0000
  GOTO/CART,    6.1452, 55.7683, 32.0000
  GOTO/CART,    6.5804, 56.4196, 32.0000
  GOTO/CART,    7.2317, 56.8548, 32.0000
  PTMEAS/CART,  8.0000, 60.0000, 32.0000,  0.0000, -1.0000,  0.0000
  GOTO/CART,    8.7683, 56.8548, 32.0000
  GOTO/CART,    9.4196, 56.4196, 32.0000
  GOTO/CART,    9.8548, 55.7683, 32.0000
  PTMEAS/CART, 13.0000, 55.0000, 32.0000, -1.0000,  0.0000,  0.0000
  GOTO/CART,    9.8548, 54.2317, 32.0000
  GOTO/CART,    9.4196, 53.5804, 32.0000
  GOTO/CART,    8.7683, 53.1452, 32.0000
  PTMEAS/CART,  8.0000, 50.0000, 32.0000, -0.0000,  1.0000,  0.0000
  GOTO/CART,    8.0000, 52.9924, 55.9924
ENDMES
F(CIR2)=FEAT/CIRCLE,INNER,CART,72.0000,55.0000,32.0000,-0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 69.9924, 55.0000, 55.9924
MEAS/CIRCLE, F(CIR2), 4
  GOTO/CART,   69.9924, 55.0000, 55.9924
  PTMEAS/CART, 67.0000, 55.0000, 32.0000,  1.0000, -0.0000, -0.0000
  GOTO/CART,   70.1452, 55.7683, 32.0000
  GOTO/CART,   70.5804, 56.4196, 32.0000
  GOTO/CART,   71.2317, 56.8548, 32.0000
  PTMEAS/CART, 72.0000, 60.0000, 32.0000,  0.0000, -1.0000,  0.0000
  GOTO/CART,   72.7683, 56.8548, 32.0000
  GOTO/CART,   73.4196, 56.4196, 32.0000
  GOTO/CART,   73.8548, 55.7683, 32.0000
  PTMEAS/CART, 77.0000, 55.0000, 32.0000, -1.0000,  0.0000,  0.0000
  GOTO/CART,   73.8548, 54.2317, 32.0000
  GOTO/CART,   73.4196, 53.5804, 32.0000
  GOTO/CART,   72.7683, 53.1452, 32.0000
  PTMEAS/CART, 72.0000, 50.0000, 32.0000, -0.0000,  1.0000,  0.0000
  GOTO/CART,   72.0000, 52.9924, 55.9924
ENDMES
F(LN_BF1)=FEAT/LINE,BND,CART,8.0000,55.0000,32.0000,72.0000,55.0000,32.0000,-0.0000,0.0000,1.0000
CONST/LINE,F(LN_BF1),BF,FA(CIR1),FA(CIR2)

• 1.
• 2.
• 3.
• 4.
• 5.
• 6.
• 7.
• 8.
• 9.
• 10.
• 11.
• 12.
• 13.
• 14.
• 15.
• 16.
• 17.
• 18.
• 19.
• 20.
• 21.
• 22.
• 23.
• 24.
• 25.
• 26.
• 27.
• 28.
• 29.
• 30.
• 31.
• 32.
• 33.
• 34.
• 35.
• 36.
• 37.
• 38.
• 39.
• 40.
• 41.
• 42.
• 43.
• 44.
• 45.
• 46.
• 47.
• 48.
• 49.
• 50.
• 51.
• 52.
• 53.
• 54.
• 55.
• 56.
• 57.
• 58.
• 59.
• 60.
• 61.
• 62.
• 63.
• 64.
• 65.
• 66.
• 67.
• 68.
• 69.
• 70.
• 71.
• 72.
• 73.
• 74.
• 75.
• 76.
• 77.
• 78.
• 79.
• 80.
• 81.
• 82.
• 83.
• 84.
• 85.
• 86.
• 87.
• 88.
• 89.
• 90.
• 91.
• 92.
• 93.
• 94.
• 95.
• 96.
• 97.
• 98.
• 99.
• 100.
• 101.
• 102.
• 103.
• 104.
• 105.
• 106.
• 107.
• 108.
• 109.
• 110.
• 111.
• 112.
• 113.
• 114.
• 115.
• 116.
• 117.
• 118.
• 119.
• 120.
• 121.
• 122.
• 123.
• 124.
• 125.
• 126.
• 127.
• 128.
• 129.
• 130.
• 131.
• 132.
• 133.
• 134.
• 135.
• 136.
• 137.
• 138.
• 139.
• 140.
• 141.
• 142.
• 143.
• 144.
• 145.

原创作者: u_14941238 转载于: https://blog.51cto.com/u_14941238/11470609