按键控制8*8led点阵C语言程序,单片机驱动8*8LED点阵c程序

TMD啊，受不了了，一到看书的时候楼上就装修！！！！cacacaca

写不下去了  直接上代码

#include

typedef unsigned char uint8;

typedef unsigned int uint16;

sbit acon=P1^0;      //38译码器

sbit bcon=P1^1;

sbit ccon=P1^2;

sbit en=P1^7;         //译码器使能

uint8 j=0,k=0;

uint16 i=0;

code uint8 ledcode[]={ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,  //

0xFF,0xC3,0xE7,0xE7,0xE7,0xE7,0xC3,0xFF,  //    I

0xFF,0x99,0x66,0x7E,0xBD,0xDB,0xE7,0xFF,  //   心

0xFF,0x99,0x99,0x99,0x99,0x99,0xC3,0xFF,  //   U

0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF };  //     哄老婆用

void timer1_init()

{

TMOD|=0x10;

TMOD&=0xef;

TH1=0xfc; //1ms

TL1=0x66;

TR1=1;        //定时器1开启

}

void inter_init()

{

ET1=1;              //定时器1中断开启

EA=1;               //总中断开启

}

void frush()

{

switch(j)

{

case 0:acon=0;bcon=0;ccon=0;break;                               //扫描LED点阵

case 1:acon=1;bcon=0;ccon=0;break;

case 2:acon=0;bcon=1;ccon=0;break;

case 3:acon=1;bcon=1;ccon=0;break;

case 4:acon=0;bcon=0;ccon=1;break;

case 5:acon=1;bcon=0;ccon=1;break;

case 6:acon=0;bcon=1;ccon=1;break;

case 7:acon=1;bcon=1;ccon=1;break;

}

P2=ledcode[k+j];                  //逐行输出

if(j==7)j=0;

j++;

}

main()

{

en=1;

P2=0xff;

timer1_init();

inter_init();

while(1);

}

void timer1_interrupt() interrupt 3

{

TH1=0xfc;

TL1=0x66;

i++;

frush();

if(i==500)

{

i=0;

if(k==32)k=0;

k++;

}

}

仿真图：