mysql启用keepalive_MYSQL + MHA +keepalive + VIP安装配置(三)keepalived安装配置

一、概述

keepalived介绍：Keepalived的作用是检测web服务器的状态，如果有一台web服务器死机，或工作出现故障，Keepalived将检测到，并将有故障的web 服务器从系统中剔除，当web服务器工作正常后Keepalived自动将web服务器加入到服务器群中，这些工作全部自动完成，不需要人工干涉，需要人 工做的只是修复故障的web服务器。

二、环境

vip:192.168.1.203204

mysql-master:192.168.1.231

mysql-slave:192.168.1.232

三、keepalived安装

安装步骤两台机mysql-master、mysql-slave一样，如下：

1、下载地址：http://www.keepalived.org/software/keepalived-1.2.12.tar.gz

shell>wget http://www.keepalived.org/software/keepalived-1.2.12.tar.gz

2、安装环境

yum -y install openssl-devel

否则会报如下错误

configure: error:

!!! OpenSSL is not properly installed on your system. !!!

!!! Can not include OpenSSL headers files.

3、安装

shell>tar -zxvf keepalived-1.2.12.tar.gz

shell>cd keepalived-1.2.12

shell>./configure --prefix=/opt/keepalived --with-kernel-dir=/usr/src/kernels/2.6.32-431.el6.x86_64/

shell>make

shell>make install

说明：

--prefix：安装路径

--with-kernel-dir：这个是重要的参数，这个参数并不表示我们要把Keepalived统进内核，而是指使用内核源码里面的头文件，也就是include目录。

2.6.32-431.el6.x86_64可以通过

shell>uname -r 命令查看到

4、配置

# cp /opt/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/

# cp /opt/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

# mkdir /etc/keepalived

# cp /opt/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

# cp /opt/keepalived/sbin/keepalived /usr/sbin/

5、启动/停止

shell>service keepalived start

shell>service keepalived stop

shell>service keepalived restart

四、keepalived配置

1、mysql-master:192.168.1.231的配置

shell>vim /etc/keepalived/keepalived.conf

配置如下：

global_defs {

router_id mysql-master #修改为自己的主机名

notification_email {

mengtao10@163.com #接收邮件，可以有多个，一行一个

}

#当主、备份设备发生改变时，通过邮件通知

notification_email_from lzyangel@126.com

#发送邮箱服务器

smtp_server stmp.163.com

#发送邮箱超时时间

smtp_connect_timeout 30

}

##################第一部分###################

vrrp_instance VI_1 {

state BACKUP #都修改成BACKUP

interface eth0 #绑定的网卡

virtual_router_id 60 #默认51 主从都修改为60

priority 100 #优先级，在mysql-slave上LVS上修改成80

advert_int 1

nopreempt #不抢占资源，意思就是它活了之后也不会再把主抢回来

authentication {

# 认证方式，可以是PASS或AH两种认证方式

auth_type PASS

# 认证密码

auth_pass 1111

}

virtual_ipaddress {

192.168.1.203

192.168.1.204 #这可以增加多个VIP

}

}

##################第二部分###################

virtual_server 192.168.1.203 3306 {

delay_loop 6

lb_algo wrr

lb_kind DR

nat_mask 255.255.255.0

persistence_timeout 50

protocol TCP

real_server 192.168.1.231 3306 {

weight 1

notify_down /root/mysql_down.sh

TCP_CHECK {

connect_timeout 10

nb_get_retry 3

connect_port 3306

}

}

}

2、mysql-master:192.168.1.232的配置

shell>vim /etc/keepalived/keepalived.conf

配置如下：

global_defs {

router_id mysql-master #修改为自己的主机名

notification_email {

mengtao10@163.com #接收邮件，可以有多个，一行一个

}

#当主、备份设备发生改变时，通过邮件通知

notification_email_from lzyangel@126.com

#发送邮箱服务器

smtp_server stmp.163.com

#发送邮箱超时时间

smtp_connect_timeout 30

}

##################第一部分###################

vrrp_instance VI_1 {

state BACKUP #都修改成BACKUP

interface eth0 #绑定的网卡

virtual_router_id 60 #默认51 主从都修改为60

priority 80 #优先级，在mysql-master上LVS上修改成100

advert_int 1

authentication {

# 认证方式，可以是PASS或AH两种认证方式

auth_type PASS

# 认证密码

auth_pass 1111

}

virtual_ipaddress {

192.168.1.203

192.168.1.204 #这可以增加多个VIP

}

}

##################第二部分###################

virtual_server 192.168.1.203 3306 {

delay_loop 6

lb_algo wrr

lb_kind DR

nat_mask 255.255.255.0

persistence_timeout 50

protocol TCP

real_server 192.168.1.232 3306 {

weight 1

notify_down /root/mysql_down.sh

TCP_CHECK {

connect_timeout 10

nb_get_retry 3

connect_port 3306

}

}

}

3、myslq_down.sh配置，两台机都要配置这一步！！！

这里需要注意的是，notify_down /root/mysql_down.sh这个选项，这个是是在keepalived检测不到mysql的时候要执行的脚本，从上面的配置文件来看real服务器只有本机。那么，keeaplived如果启动，客户端也只是访问本机的mysql。nopreempt这个选下也得注意，这个是不抢占资源在优先级高的机器上配置就可以。

看下这个脚本的内容：

# vim /root/mysql_down.sh

#!/bin/bash

pkill keepalived

# chmod +x /root/mysql_down.sh #授权可执行权限

脚本内容就一条命令：pkill keepalived，主要作用是如果本机的mysql挂掉了，那么同时会杀死本机的keepalived，这样另外一台就会接替他工作，虚拟IP也会被另一台接管，如果不杀死keepalived虚拟IP不会被另一台接管，mysql访问也就不会切换过去。

注意：必须要先启动MYSQL,再启动keepalived，否则keepalived启动后会运行mysql_down.sh脚本，等于自杀。

4、mysql-master(231)启动后查看IP的绑定情况，如下：

shell> ip a

1: lo: mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 08:00:27:cc:92:22 brd ff:ff:ff:ff:ff:ff

inet 192.168.1.232/24 brd 192.168.1.255 scope global eth0

inet 192.168.1.203/32 scope global eth0

inet 192.168.1.204/32 scope global eth0

inet6 fe80::a00:27ff:fecc:9222/64 scope link

valid_lft forever preferred_lft forever

五、测试

1、231、232两台机同时启动MYSQL及Keepalived.

通过win cmd 命令行的客户端(或程序)连接VIP：192.168.1.203或204，如下：

C:UsersDuncan>mysql -h192.168.1.203 -usunney -psunney

Welcome to the MySQL monitor. Commands end with ; or g.

Your MySQL connection id is 1440

Server version: 5.5.37-log MySQL Community Server (GPL)

Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or 'h' for help. Type 'c' to clear the current input statement.

mysql> show databases;

+--------------------+

| Database |

+--------------------+

| information_schema |

| mysql |

| performance_schema |

| sunney |

| test |

+--------------------+

5 rows in set (0.04 sec)

mysql>

注意：这时存储的数据库是mysql-master(192.168.1.231)因为他是主库。配置 priority 100 优先级高。

2、mysql-slave(232)的机同时关闭MYSQL及Keepalived.这时关闭上以上的是一样的。因为他没有走这个库。

3、mysql-master(231)同时关闭MYSQL及Keepalived,mysql-slave(232)同时启动MYSQL及Keepalived

切换很快，大概在2到3秒之间！

通过win cmd 命令行的客户端(或程序)连接VIP：192.168.1.203或204，如下：

C:UsersDuncan>mysql -h192.168.1.203 -usunney -psunney

Welcome to the MySQL monitor. Commands end with ; or g.

Your MySQL connection id is 1440

Server version: 5.5.37-log MySQL Community Server (GPL)

Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or 'h' for help. Type 'c' to clear the current input statement.

mysql> show databases;

+--------------------+

| Database |

+--------------------+

| information_schema |

| mysql |

| performance_schema |

| sunney |

| test |

+--------------------+

5 rows in set (0.04 sec)

mysql>

成功！