zynq linux多个中断注册,zynq linux 中断号如何对应

在linux系统下，中断号跟BD中zynq7000 processer中配置的生成的中断号不是直接对应的，中间有一个“-32” 的关系，如下

For Shared Periperal interrupts, the value in the device tree is the (IRQ - 32) ;

例子 interrupts = <0x0 0x32 0x0>; 中间的参数0X32是中断号 50

uart@e0001000 {

compatible = "xlnx,ps7-uart-1.00.a";

reg = <0xe0001000 0x1000>;

interrupts = <0x0 0x32 0x0>;

interrupt-parent = ;

clock = <50000000>;

};

The second value is the interrupt number. The translate function adds 16

to SPIs and 32 to non-SPIs, so for interrupts generated by fabric logic

in a Zynq, the number in the DTS file should be the hardware number (as

shown in Xilinx Platform Studio, XPS) minus 32.

翻译：第二个参数是中断号。传递的过程中会区分是否为spi中断，如果是spi中断则加16，非spi则加32 ，

所以在devicetree中的生成的中断号是实际中断号减去32 ;

*博客内容为网友个人发布，仅代表博主个人观点，如有侵权请联系工作人员删除。