latex面板设置_LaTeX技巧82：WinEdt使用技巧（含自动换行设置）

The following way can make

WinEdt auto-wrap:

Step 1. WinEdt Menu

--> Options --> Configuration Wizard

--> Wrapping --> Select "Use Conventional Wrapping" and Unselect

the other two options --> restart

WinEdt.

Step 2. Make sure the

following options:

WinEdt Menu

--> Options --> Settings

--> Wrapping

(1) Soft Wrapping Options: Only choose " Auto wrap and unwrap" and

deselect the others;

(2) Options: only choose the first one

(3) Soft wrapping: Check "Soft Wrapping for Modes", No parameters

for the space box

(4) Wrap Undoing: Only choose the first one

Step 3: Make sure the

"Wrap" on the bottom of the WinEdt Main

Frame ("Editing Enviorement") is bright (not gray).

Good luck.

-----------------------------------------------------------------------

设置后WinEdt可以根据屏宽自动换行了。

+++++++++++++++++++++++++++++++++++++++++++++

1. 在WinEdt中，输入完“\begin{ xxx

}”后，不忙着按回车去写其它内容，紧接着最后的“ }”后面，再输入一个“ }”(也就是键入“\begin{ xxx }

}”)，这时WinEdt会自动将“\end{ xxx

}”补上，同时将光标停在两者之间的空白行上，并且已经自动缩进。如果输入\begin{ xxx

}时忘了这事儿，也没有关系，输入“\end”后，连续输入两个“{