1.(拓扑图是转载的)
2.拓扑文件（需要启两个Dynamips，用不同的端口）。
autostart = false
ghostios= ture
sparsemem = true
[localhost:7200]
udp = 10000
workingdir = D:\dynamips\tmp
`7200`
  p_w_picpath = D:\dynamips\p_w_picpaths\unzip-c7200-advsecurityk9-mz.124-11.T.bin
  ram = 256
  mmap = true
  confreg = 0x2102
  npe = npe-400
  idlepc = 0x60e718cc
  exec_area = 64
  slot1 = PA-2FE-TX
  slot2 = PA-2FE-TX
  slot3 = PA-4T
`3640`
    p_w_picpath = D:\dynamips\p_w_picpaths\c3640-jk9o3s-mz[1].124-16a.bin
    ram = 128
    mmap = true
    confreg = 0x2102
    exec_area = 64
    idlepc = 0x60505294
    slot0 = NM-4T
    slot1 = NM-16ESW
    `router R1`
    model = 7200
    console = 3000
    F2/0 = R2 F2/0
    F2/1 = R2 F2/1
    F1/0 = SW3 F1/0
    F1/1 = SW4 F1/1
    S3/0 = DXISP S0/0
    `router R2`
    model = 7200
    console = 3001
    F1/1 = SW3 F1/1
    F1/0 = SW4 F1/0
    S3/0 = WTISP S0/0
    `router TFTP`
    model = 3640
    console = 3006
    `router DHCP`
    model = 3640
    console = 3007
   `router DXISP`
    model = 3640
    console = 3008
   `router WTISP`
    model = 3640
    console = 3009
[localhost:7201]
udp = 20000
workingdir = D:\dynamips\tmp1
`2691`
  p_w_picpath = D:\dynamips\p_w_picpaths\c2691-advsecurityk9-mz.124-11.T2.bin
  ram = 128
  mmap = true
  confreg = 0x2102
  idlepc = 0x60c1054c
  exec_area = 64
  slot1 = NM-16ESW

    `router SW1`
    model = 2691
    console = 3002
      F1/1 = NIO_udp:30000:127.0.0.1:40000
     # connect to VPC 1
      F1/2 = NIO_udp:30001:127.0.0.1:40001
      F1/3 = NIO_udp:30002:127.0.0.1:40002
      F1/4 = NIO_udp:30003:127.0.0.1:40003
    `router SW2`
    model = 2691
    console = 3003
     F1/1 = NIO_udp:30004:127.0.0.1:40004
     F1/2 = NIO_udp:30005:127.0.0.1:40005
     F1/3 = NIO_udp:30006:127.0.0.1:40006
     F1/4 = NIO_udp:30007:127.0.0.1:40007
      # connect to VPC 8
    `router SW3`
    model = 2691
    console = 3004
    F1/13 = SW4 F1/13
    F1/14 = SW4 F1/14
    F1/11 = SW1 F1/11
    F1/12 = SW2 F1/12
    F1/10 = TFTP F1/10
    `router SW4`
    model = 2691
    console = 3005
    F1/12 = SW1 F1/12
    F1/11 = SW2 F1/11
    F1/10 = DHCP F1/10
（需要注意的是，这里改了vpcs的默认端口，因为第二个dynamips占用了20000开头的端口）