移植交叉编译pcDuino + busybox 成功搭建最小linux系统

新手发帖，很多方面都是刚入门，有错误的地方请大家见谅，欢迎批评指正

    经过一周的实验，我的pcduino mini linux统系终究跑起来了。启动面界如下：

    U-Boot 2012.10 (Apr 19 2013 - 18:46:44) Allwinner Technology

    CPU:   SUNXI Family
Board: pcDuino
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

    In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0 
reading uEnv.txt

    144 bytes read
Loaded environment from uEnv.txt
reading boot.scr

    289 bytes read
Jumping to boot.scr
## Executing script at 44000000
Wrong image format for "source" command
reading script.bin

    44900 bytes read
reading uImage

    4693132 bytes read
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.0.62
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4693068 Bytes = 4.5 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

    Starting kernel ...

    <6>Initializing cgroup subsys cpuset
<5>Linux version 3.0.62 (change@change) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Sat Apr 20 18:32:39 CST 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
<6>Memory cut off:
<6>     MALI : 0x5c000000 - 0x5fffffff  (  64 MB)
<4>Ignoring unrecognised tag 0x00000000
<6>Memory Reserved:
<6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>     VE   : 0x44000000 - 0x48ffffff  (  80 MB)
<6>     G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
<6>     LCD  : 0x5a000000 - 0x5bffffff  (  32 MB)
Memory policy: ECC disabled, Data cache writeback
<6>chip-id: A10 (AW1623 revision C)
<7>On node 0 totalpages: 245760
<7>free_area_init_node: node 0, pgdat c0887ea0, node_mem_map c094e000
<7>  Normal zone: 1280 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 146176 pages, LIFO batch:31
<7>  HighMem zone: 768 pages used for memmap
<7>  HighMem zone: 97536 pages, LIFO batch:31
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243712
<5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 448MB 512MB = 960MB total
<5>Memory: 833852k/833852k available, 149188k reserved, 393216K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    ........//太长了，省略多少

    每日一道理
盈盈月光，我掬一杯最清的；落落余辉，我拥一缕最暖的；灼灼红叶，我拾一片最热的；萋萋芳草，我摘一束最灿的；漫漫人生，我要采撷世间最重的———毅力。

    <6>mmc0: new high speed SD card at address 1234
[    4.140000] mmc0: new high speed SD card at address 1234
<6>mmcblk0: mmc0:1234 SA01G 942 MiB 
[    4.160000] mmcblk0: mmc0:1234 SA01G 942 MiB 
<6> mmcblk0: p1 p2
[    4.170000]  mmcblk0: p1 p2
<6>Console: switching to colour frame buffer device 160x45
[    4.290000] Console: switching to colour frame buffer device 160x45
<4>regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[    4.330000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[    4.350000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[    4.360000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[    4.380000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[    4.390000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[    4.410000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
<6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[    4.420000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:10
[    4.430000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:10
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:10 UTC (1262304010)
[    4.440000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:10 UTC (1262304010)
<3>EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[    4.460000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
<3>EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
[    4.480000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
<6>EXT4-fs (mmcblk0p2): recovery complete
[    5.840000] EXT4-fs (mmcblk0p2): recovery complete
<6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.060000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
<6>VFS: Mounted root (ext4 filesystem) on device 179:2.
[    6.080000] VFS: Mounted root (ext4 filesystem) on device 179:2.
<6>devtmpfs: mounted
[    6.090000] devtmpfs: mounted
<6>Freeing init memory: 164K
[    6.090000] Freeing init memory: 164K
mount: mounting devpts on /dev/pts failed: No such file or directory
mount: mounting /dev/mmcblk0p1 on /boot failed: No such file or directory


Please press Enter to activate this console. 


Processing /etc/profile... Done


/ # ls
bin         home        lost+found  run         tmp
dev         lib         mnt         sbin        usr
etc         linuxrc     proc        sys         var

    / # ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 12:5B:BD:7D:C4:75  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:55 Base address:0x8000 


/ # ifconfig eth0 172.16.1.133
<4>wemac wemac.0: WARNING: no IRQ resource flags set.
[ 2360.950000] wemac wemac.0: WARNING: no IRQ resource flags set.
<6>wemac wemac.0: eth0: link down
[ 2361.060000] wemac wemac.0: eth0: link down
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2361.070000] ADDRCONF(NETDEV_UP): eth0: link is not ready
/ # 

    具体移植进程见linux移植一、二、三。花了不少间时啊，这是移植心得。

    pcduino linux移植期间遇到了不少问题，结总如下：

    1.pkg-config可以决解明显在自己器机上编译好好的，在别人电脑上编译就不行问题,它能为已安装的库时供提一统接口。解了pkg-config决解Package libusb-1.0 was not found in the pkg-config search path

    2.用busybox制造文件统系时，要注意文件的性属。括包态动接链、执行权限等。通过sudo cp -pR file1 file2,留保文件性属，否则统系跑步起来。

    3.ubuntu下烧写tf卡命令，这里易容出问题，发明杂牌子的tf卡就不行，一卡了一段间时，最后断果Kingstorm

    4.Kernel panic - not syncing: No init found.  Try passing init= option to kernel,这个问题说了找不到init，而我置设init=/sbin/init，显然没问题。原因安在呢？

    change@change:~/Si/A10/pcduino/rootfs$ ls sbin/ -l

    lrwxrwxrwx 1 change change 14 2013-04-28 21:16 init -> ../bin/busybox

    change@change:~/Si/A10/pcduino/rootfs$ file linuxrc 
linuxrc: symbolic link to `bin/busybox'

    发明bin/busybox是一个态动接链库文件，赖依交叉编译链的响应库。而交叉编译链库有很多，试了发明../arm-2009q3/arm-none-linux-gnueabi/libc/armv4t/lib/和 /home/change/tools/arm-2009q3/arm-none-linux-gnueabi/libc/armv4t/usr/lib/ 下的*.so*库可以应用。

    

    

    

文章结束给大家分享下程序员的一些笑话语录： 联想——对内高价，补贴对外倾销的伟大“民族”企业。