OpenWrt设置访客网络Guest Wi-Fi

参考 https://wiki.openwrt.org/doc/recipes/guest-wlan-webinterface

1. 在2.4GHz Wireless Controller下, 创建访客WiFi

在编辑界面中, Channel选择与现有网络不同编号,Advanced Settings都保持默认

ESSID设置一个易于辨认的名称, 例如OpenWrt-Guest, Mode选择Access Point, Network选择create, 填入guest, Wireless Security先不用设置

Save & Apply

2. 设置Network中新增的 GUEST interface

Protocol选择Static address, 点击switch protocol, 填入与当前子网不同的网段IP, 例如192.168.1.1, mask 255.255.255.0

Firewall Settings 选择create, 填入 guest

启用dhcp

Save & Apply

3. 设置Firewall, 点击guest对应的edit

Input设置为reject, Covered networks只选guest, Inter-Zone Forwarding中, 仅勾选Allow forward to destination zones的 wan部分

Save & Apply

4. 设置Firewall -> Traffic Rules

Open ports on router

添加 Name: Allow-Guest-DNS, Protocol:TCP+UDP, External port:53

添加 Name: Allow-Guest-DHCP, Protocol:UDP, External port:67-68

再分别编辑这两个rule, 将Source zone改为guest, Destination zone改为Device(input)

 

 

 

Save & Apply