经常看到一些学生或学习网络方向的朋友，总是说没有完整项目经验，正好目前手上有个MPLS-×××项目，是公司年后中了一个一千多万的标，至于前面招标，投标（包括标书的制作等，我就不说了）；经过前期准备工作，本周召开了此项目全国视频会议有关项目实施，今天我要写的是关于项目前的设备验收。
此项目5月16号进行验收，周五与客户联系，下周一上午9点做设备验收，以下是两台核心设备的信息：
第一步：是设备开箱抄写序列号，便于以后设备维保（序列号在包装箱上，所以建议客户在项目没有完工前不要扔掉纸箱）
第二步：根据设备插槽设计，一一将板卡插入设备。
|
设备型号
|
槽位
|
板卡
|
序列号
|
|
机框SN:
| |||
|
H3C 5040
|
引擎槽位
|
RT-MPU-G2-H3
|
|
|
FIC槽位5
|
RT-FIC-4FE-H3
|
| |
|
FIC槽位6
|
RT-FIC-8E1(75)-F-V2-H3
|
| |
|
FIC槽位7
|
空
|
| |
|
FIC槽位8
|
空
|
| |
|
MSC槽位（后面板）
|
RT-MSCB-H3
|
| |
|
POWER 0
|
原装电源
|
| |
|
POWER 1
|
加配电源
|
| |
|
设备型号
|
槽位
|
板卡
|
序列号
|
|
机框SN:
| |||
|
|
引擎槽位0
|
LSQM1SRPA0
|
|
|
引擎槽位1
|
|
| |
|
业务板槽位2
|
LSQM1FV48SA0
|
| |
|
业务板槽位3
|
LSQM1GV48SC0
|
| |
|
业务板槽位4
|
|
| |
|
业务板槽位5
|
|
| |
|
业务板槽位6
|
|
| |
|
POWER 0
|
|
| |
|
POWER 1
|
|
| |
设备从纸箱拿出来是图片：
把引擎和交换板卡按槽位对应插入（规范操作是带上防静电手套，防止静电对板卡的损坏）：
最后生成一个完整的设备图。
路由器也一样：
第三步：加电自检，包括设备版本，设备硬件及diag信息，电源冗余、端口测试。
<H3C>
System is starting...
Do you want to check SDRAM? [Y/N]
Booting Normal Extend BootWare........
****************************************************************************
* *
* H3C MSR50-40 BootWare, Version 1.19 *
* *
****************************************************************************
Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Aug 11 2010
CPU Type : MPC7448
CPU L1 Cache : 32KB
CPU L2 Cache : 1024KB
CPU Clock Speed : 1700MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 1024KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 2.0
PCB Version : 2.0
交接机测试也是一样，在此省略。。。
完成设备加电测试后，如果没有问题就请客户签验收报告了，至此设备验收到些结束了，随着项目工程进展，我将一一写下，敬请关注。。。
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--cfa0:/main.bin!..................
............................................................................
........................................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
..........
Done!
System application is starting...
id=0x2000,proc=0x1b2a060
id=0x2fff,proc=0xc32d44
id=0x5000,proc=0x1b5c504
id=0x10000,proc=0x1b47b70
id=0x70000,proc=0x1b4c13c
id=0x70001,proc=0x50c0e4
id=0x100fff,proc=0x5052a8
id=0x100fff,proc=0x505320
。。。。。。。
id=0x18300fff,proc=0x505c20
id=0x18400100,proc=0x505e6c
id=0x19700100,proc=0x5086a0
id=0x19700fff,proc=0xc73e24
id=0x1a000fff,proc=0x1bde6c8
id=0x1cfff000,proc=0x1b1b98c
Startup configuration file does not exist.
User interface con0 is available.
Press ENTER to get started.
<H3C>
%May 16 11:31:52:163 2011 H3C OPTMOD/4/MODULE_IN:
GigabitEthernet0/0: The transceiver is SFP-GE-SX-MM850.
%May 16 11:31:52:163 2011 H3C OPTMOD/4/MODULE_IN:
GigabitEthernet0/1: The transceiver is SFP-GE-SX-MM850.
%May 16 11:31:52:163 2011 H3C OPTMOD/4/MODULE_IN:
GigabitEthernet0/2: The transceiver is SFP-GE-SX-MM850.
#May 16 11:32:24:193 2011 H3C SHELL/4/LOGIN:
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1<hh3cLogIn>: login from Console
%May 16 11:32:24:512 2011 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
<H3C>
<H3C>sy
System View: return to User View with Ctrl+Z.
[H3C]dis version
H3C Comware Platform Software
Comware Software, Version 5.20, Release 2104P02, Basic
Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C MSR50-40 uptime is 0 week, 0 day, 0 hour, 1 minute
Last reboot 2011/05/16 11:31:22
CPU type: FREESCALE MPC7448 1700MHz
1024M bytes DDR2 SDRAM Memory
4M bytes Flash Memory
Pcb Version: 2.0
Logic Version: 2.0
Basic BootROM Version: 1.17
Extended BootROM Version: 1.19
[SLOT 0]CON (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]AUX (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]GE0/0 (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]GE0/1 (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]GE0/2 (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]ETH0/0 (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 0]CELLULAR0/0 (Hardware)2.0 (Driver)1.0, (Cpld)2.0
[SLOT 5]FIC-4FE (Hardware)4.2 (Driver)1.0, (Cpld)0.0
[SLOT 6]FIC-8E1(75)-F (Hardware)3.2 (Driver)1.0, (Cpld)1.0
[SLOT 11]FIX-SNDE (Hardware)2.0 (Driver)2.0, (Cpld)2.0
[H3C]dis dev
[H3C]dis device mani
[H3C]dis device man
[H3C]dis device manuinfo
电源冗余：
[H3C]
%May 16 11:40:53:763 2011 H3C DRVMSG/3/PwrLoss: Power supply 0 down.
#May 16 11:40:54:252 2011 H3C DEVM/1/POWER STATE CHANGES TO FAILURE:
Trap 1.3.6.1.4.1.25506.8.35.12.1.1<hh3cpowerfailure>: power ID is 0
%May 16 11:40:54:252 2011 H3C DEVM/2/POWER_FAILED: Power Power Supply #0 failed.
[H3C]
[H3C]dis pow
[H3C]dis power
Power 0 State: Fault
Power 1 State: Normal
[H3C]dis fan
Fan 1 State: Normal
[H3C]
%May 16 11:41:33:763 2011 H3C DRVMSG/3/PwrOk: Power supply 0 up.
#May 16 11:41:34:252 2011 H3C DEVM/1/POWER STATE CHANGES TO NORMAL:
Trap 1.3.6.1.4.1.25506.8.35.12.1.2<hh3cPowerNormal>: power ID is 0
%May 16 11:41:34:252 2011 H3C DEVM/5/POWER_RECOVERED: Power Power Supply #0 recovered.
[H3C]dis pow
[H3C]dis power
Power 0 State: Normal
Power 1 State: Normal
[H3C]dis fan
Fan 1 State: Normal
[H3C]dis fan
Fan 1 State: Normal
[H3C]
[H3C]
%May 16 11:42:28:763 2011 H3C DRVMSG/3/PwrLoss: Power supply 1 down.
#May 16 11:42:29:453 2011 H3C DEVM/1/POWER STATE CHANGES TO FAILURE:
Trap 1.3.6.1.4.1.25506.8.35.12.1.1<hh3cpowerfailure>: power ID is 1
%May 16 11:42:29:453 2011 H3C DEVM/2/POWER_FAILED: Power Power Supply #1 failed.
[H3C]dis pow
[H3C]dis power
Power 0 State: Normal
Power 1 State: Fault
[H3C]dis fan
Fan 1 State: Normal
[H3C]
%May 16 11:43:03:763 2011 H3C DRVMSG/3/PwrOk: Power supply 1 up.
#May 16 11:43:03:852 2011 H3C DEVM/1/POWER STATE CHANGES TO NORMAL:
Trap 1.3.6.1.4.1.25506.8.35.12.1.2<hh3cPowerNormal>: power ID is 1
%May 16 11:43:03:852 2011 H3C DEVM/5/POWER_RECOVERED: Power Power Supply #1 recovered.
[H3C]
[H3C]
[H3C]dis powr
^
% Unrecognized command found at '^' position.
[H3C]dis power
Power 0 State: Normal
Power 1 State: Normal
[H3C]dis fan
Fan 1 State: Normal
端口测试：
Ethernet adapter 本地连接:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
C:\Documents and Settings\Administrator>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Administrator>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
Reply from 192.168.1.1: bytes=32 time<1ms TTL=255
dis diagnostic-information 在此省略.....
转载于:https://blog.51cto.com/freewuqiang125/568476
扫一扫
2637
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
