实验：OSPF高级配置（三）绝对末节区域

本篇只介绍绝对末节区域的配置，及实验结果显示。如需查看之前配置，可参看本专题前两篇文章（ 一）、（ 二）。

拓扑图：

将区域1配置为绝对末节区域，要R2、R3、R4均设置为末节路由器，并且R2不能转发汇总信息到区域1内（只通告给R3、R4默认路由）。

 

路由器配置：

R2:

R2(config)#router ospf 1
R2(config-router)#area 1 stub no-summary

 

R3:

R3(config)#router ospf 1
R3(config-router)#area 1 stub

 

R4:

R4(config)#router ospf 1
R4(config-router)#area 1 stub

 

查看末节区域内的路由表：

R3#sh ip route 
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is 192.168.17.1 to network 0.0.0.0

C    192.168.30.0/24 is directly connected, FastEthernet1/0
C    192.168.17.0/24 is directly connected, FastEthernet0/0
O*IA 0.0.0.0/0 [110/2] via 192.168.17.1, 00:06:56, FastEthernet0/0

 

R4#sh ip route 
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is 192.168.30.1 to network 0.0.0.0

C    192.168.30.0/24 is directly connected, FastEthernet0/0
O    192.168.17.0/24 [110/2] via 192.168.30.1, 00:07:13, FastEthernet0/0
O*IA 0.0.0.0/0 [110/3] via 192.168.30.1, 00:07:13, FastEthernet0/0

 

本文转自 tiger506 51CTO博客，原文链接：http://blog.51cto.com/tiger506/169925，如需转载请自行联系原作者