不小心在一台switch上show int status:
发现有4端口处于err-disabled,OpenView居然没有报警!
后来:
switch(config)#errdisable recovery cause all
switch(config)#errdisable recovery interval 30
大约30秒后,再sh int status,那4端口状态恢复正常。
然后:
switch(config)#default errdisable recovery cause all
switch(config)#default errdisable recovery interval
no掉两条配置。
转载于:https://blog.51cto.com/sukhoi/143020