1.概念：
The Enterprise Manager DBConsole consists of the following components:
- A Standalone OC4J Management Service (DBConsole OMS) （server side ）
- A local Management Agent (EM agent) (agent side )
- A local Management Repository (also referred as DBConsole Repository) (server side)
作为分布式架构OEM，也就是一 server对多client 的架构，
server 端执行：
emctl status oms
agent 端执行：
emctl status agent
做为一对一的架构，dbconsole
server/client 端执行：
emctl status dbconsole
2.
Please set the ORACLE_HOME to your Agent Home location using
For Unix:
export ORACLE_HOME=/oracle/product/agent11g
For Windows:
set ORACLE_HOME=C:\oracle\product\agent11g
The emctlutility can be executed from the <AGENT_HOME>/bin directory.
emctl.log file
The emctl.log file is a file that captures the results of all emctl commands you run. The log file resides in the $ORACLE_HOME/sysman/log directory of the Management Agent, and is updated every time you run an emctl command. If your emctl command fails for some reason, access this log file to diagnose the issue.
For more information On how to debug emctl.log file Please refer to Oracle Enterprise Manager Administration 11g Release 1 (11.1.0.1), Chapter 7 - Starting and Stopping Enterprise Manager Components, Topic: Using emctl.log File.
Description of EMCTL Commands:
| Command | Description |
|---|
| emctl start agent | Starts the Management Agent |
| emctl stop agent | Stops the Management Agent |
| emctl status agent | If the Management Agent is running, this command displays
status information about the Management Agent, including the
Agent Home, the process ID, and the time and date of the last successful upload to the Management Repository |
| emctl upload (agent) | Use this command to force an immediate upload of the current management data from the managed host to the Management Service. |
| emctl clearstate | Clears the state directory contents. The files that are located under $ORACLE_HOME/sysman/emd/state will be deleted if this command is run. |
| emctl getemhome | Prints the Agent home directory |
| emctl config agent getLocalHost | Prints the hostname where the Agent is running |
| emctl pingOMS [agent] | Pings the OMS to check if the agent is able to connect to the
OMS. Agent will wait for the reverse ping from the OMS so that Agent can say the pingOMS is successful. |
| emctl verifykey | Verifies the communication between the OMS and agent by
sending pingOMS. |
| emctl reload agent | Reloads the agent by reading the emd.properties and targets.xml files again. |
| emctl status agent scheduler | Lists all Running, Ready, and Scheduled Collection threads |
| emctl status agent jobs | Lists the status of the jobs that are running at present on the
agent. |
| emctl status agent target | Lists the detailed status of the specified targets in the order of
target name, target type |
Agent Secure Commands | |
| emctl status agent -secure | Check if the Agent is secured in https mode. |
| emctl secure agent agent_registration_pwd | Configures the Agent to communication with the OMS in the HTTPS mode. |
| emctl unsecure agent | Unsecures the agent. This will make the agent unsecure and the Agent's port will be changed to http port. |
| emctl secure setpwd [-sysman_pwd] [new registration pwd] | To add a new Agent Registration Password |
Blackouts | |
| emctl start blackout <Blackoutname> [<Target_name>[:<Target_Type>]].... [-d <Duration>] [-nowait] | Set an immediate blackout on a particular target or on list of targets. |
| emctl stop blackout <Blackoutname> [-nowait] | Stops an immediate blackout |
| emctl start blackout [-nodeLevel] [-d ] | Set an immediate blackout for all targets on a host |
| emctl status blackout [<Target_name>[:<Target_Type>]] | Check the status of a blackout |
Timezone commands | |
| emctl config agent getTZ | Prints the current timezone of the agent. |
emctl resetTZ agent
| This command will correct the Management Agent side time zone and specify an additional command to be run against the Management Repository to correct the value there. |
| emctl config agent updateTZ | Updates the current timezone of the agent in emd.properties file. |
| emctl config agent getSupportedTZ | Prints the supported timezones for the agent. |
Memory And CPU commands | |
| emctl status agent memory | Used for debugging agent memory. You will need to set
enableMemoryTracing=TRUE in emd.properties for memory profiling agent. |
| emctl status agent cpu | Dumps the agent Thread CPU usage into a .trc file. This file contains the list of all the threads that are running at present and their CPU usage |
| emctl dumpstate agent | Generates the dumps for the agent. This command allow you to analyze the memory/cpu issues of the agent. |
| emctl status agent memclean | Clears the memory hash table. Note that by default, the memory tracing will not be enabled by the agent. So, if the memory tracing is not enabled, then emctl status agent memclean will not clear the hashtable. |
Target Configuration | |
| emctl config agent listtargets | Lists the target names and target types on specified host |
| emctl config agent listtargetsfully | lists the targets fully |
| emctl config agent credentials [<Target_name>[:<Target_Type>]] | Provides the option to change the credentials for a particular
target.target name and target type can be obtained from output of command: emctl config agent listtargets |
| emctl config [agent] addtarget [-f-force] [] | Allows you to configure agent.
contains a definition of target to add and where -f or
-force allows to overwrite an existing target. |
| emctl config [agent] modifytarget [][][-mergeProps] | Allows you to configure agent.
contains a definition of target to modify and -mergeProps is used when only target properties are to be updated. |
| emctl config [agent] deletetarget [] | Allows you to delete target.
Specify target type and name to delete. |
Miscellaneous | |
| emctl gensudoprops | Generates the sudo properties of the agent. |
| emctl clearsudoprops | Clears the sudo properties |
| emctl secure add_trust_cert -trust_certs_loc file> | Adds the trusted new certificate on all agents to communicate with the OMS |
| emctl relocate_target agent [=]* [-force] | Used to relocate target |
| emctl getversion | Prints the version of the agent. Sample output: $ emctl getversion
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved. |
Kindly review the following :
1. Make sure the hostname is resolvable.
2. /etc/hosts should have a recommended format:
<IPAddress> <Fully Qualified Hostname> <Short Name>
3. Start the agent
./emctl start agent
Now the agent starts without any issues.
References :
12.1.0.2 agent fails to start with error "HTTP Listener failed at Startup" after new installation. [ID 1519682.1]
Or
1. Stop the agent:
<AGENT_INST_HOME>/bin>./emctl stop agent
2. Ensure that none of the agent process is running:
$ ps -ef | grep -i TMMain
3. Kill the agent process that are still running
4.Start the agent
<AGENT_INST_HOME>/bin>./emctl start agent
References :
12.1.0.2 Agent Startup Fails With Error "Possible port conflict on port" [ID 1509575.1]
Please mark the thread as Helpful or Correct to help other users to find questions that were answered.
emctl status oms
###
sample :
1.检查
ps -ef|grep em12c
ps -ef|grep em12c
opdb 13500606 17235986 0 Oct 26 - 208:20 /em12cr2/core/12.1.0.2.0/jdk/bin/java -Xmx172M -server -Djava.security.egd=file:///dev/./urandom -Dsun.lang.ClassLoader.allowArraySyntax=true -Xgcpolicy:gencon -Dwatchdog.pid=17235986 -cp /em12cr2/core/12.1.0.2.0/jdbc/lib/ojdbc5.jar:/em12cr2/core/12.1.0.2.0/ucp/lib/ucp.jar:/em12cr2/core/12.1.0.2.0/modules/oracle.http_client_11.1.1.jar:/em12cr2/core/12.1.0.2.0/lib/xmlparserv2.jar:/em12cr2/core/12.1.0.2.0/lib/jsch.jar:/em12cr2/core/12.1.0.2.0/lib/optic.jar:/em12cr2/core/12.1.0.2.0/modules/oracle.dms_11.1.1/dms.jar:/em12cr2/core/12.1.0.2.0/modules/oracle.odl_11.1.1/ojdl.jar:/em12cr2/core/12.1.0.2.0/modules/oracle.odl_11.1.1/ojdl2.jar:/em12cr2/core/12.1.0.2.0/sysman/jlib/log4j-core.jar:/em12cr2/core/12.1.0.2.0/jlib/gcagent_core.jar:/em12cr2/core/12.1.0.2.0/sysman/jlib/emagentSDK-intg.jar:/em12cr2/core/12.1.0.2.0/sysman/jlib/emagentSDK.jar oracle.sysman.gcagent.tmmain.TMMain
opdb 17235986 1 0 Sep 09 - 23:23 /em12cr2/core/12.1.0.2.0/perl/bin/perl /em12cr2/core/12.1.0.2.0/bin/emwd.pl agent /em12cr2/agent_inst/sysman/log/emagent.nohup
2.log
location is in /em12cr2/agent_inst/sysman/log/
solution:
step 1: (su - oracle用户)
su - oracle
step 2:
1). check the agent status:
/em12cr2/core/12.1.0.2.0/bin/emctl status agent
2). Stop the agent:
/em12cr2/core/12.1.0.2.0/bin/emctl stop agent
3). Ensure that none of the agent process is running:
$ ps -ef | grep -i TMMain
4). Kill the agent process that are still running
4.Start the agent
/em12cr2/core/12.1.0.2.0/bin/emctl start agent
扫一扫
9523
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
