@chaoz 非常感谢,重新分配了flash分区后,可以对分区操作了。我把BOOT.BIN 和image.ub分别烧写到了mtd0 和 mtd2分区中,启动模式(拨码开关)调整到QSPI启动,但系统没有启动。m25p80 spi0.0: s25fl512s (65536 Kbytes)
4 ofpart partitions found on MTD device spi0.0
Creating 4 MTD partitions on "spi0.0":
0x000000000000-0x000001e00000 : "boot"
0x000001e00000-0x000001e40000 : "bootenv"
0x000001e40000-0x000002c40000 : "kernel"
0x000002c40000-0x000003f40000 : "spare"
libphy: Fixed MDIO Bus: probedroot@cpctech:~# flash_eraseall /dev/mtd0
flash_eraseall has been replaced by `flash_erase 0 0`; please use it
Erasing 256 Kibyte @ 0 -- 0 % complete random: crng init done
Erasing 256 Kibyte @ 1dc0000 -- 100 % complete
root@cpctech:~# flash_eraseall /dev/mtd1
flash_eraseall has been replaced by `flash_erase 0 0`; please use it