c语言二极管控制程序,二极管(STC89C52): 编写程序控制二极管花样流水灯

原标题：二极管(STC89C52): 编写程序控制二极管花样流水灯

一. 硬件设计

二. 软件设计

1. 程序功能

编写程序控制 .

2. 程序源码

#include

#include

#define uchar unsigned char

#define uint unsigned int

uchar code a_ Table[] =

{

0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,

0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,

0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,

0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,

0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,

0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff

};

uchar code b_ledTable[]=

{

0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,

0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,

0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,

0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,

0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,

0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,

0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff

};

uchar a_lenLedTable = sizeof(a_ledTable)/sizeof(a_ledTable[0]);

uchar b_lenLedTable = sizeof(b_ledTable)/sizeof(b_ledTable[0]);

void delayms(uint xms);

void main()

{

uchar i;

P1 = 0xfe;

while (1)

{

for (i = 0; i < a_lenLedTable; i++)

{

P1 = a_ledTable[i];

delayms(150);

}

for (i = 0; i < b_lenLedTable; i++)

{

P1 = b_ledTable[i];

delayms(150);

}

}

}

void delayms(uint xms)

{

uint i, j;

for (i = xms; i > 0; i--)

for (j = 110; j > 0; j--)

;

}

责任编辑：