匹配滤波matlab,Matched Filtering

Matched Filtering to Improve SNR for Target Detection

This example shows how to improve the SNR by performing matched filtering.

Place an isotropic antenna element at the global origin (0;0;0). Then, place a target with a nonfluctuating RCS of 1 square meter approximately 7 km from the transmitter at (5000;5000;10). Set the operating (carrier) frequency to 10 GHz. To simulate a monostatic radar, set the InUseOutputPort property on the transmitter to true. Calculate the range and angle from the transmitter to the target.

antenna = phased.IsotropicAntennaElement('FrequencyRange',[5e9 15e9]);

transmitter = phased.Transmitter('Gain',20,'InUseOutputPort',true);

fc = 10e9;

target = phased.RadarTarget('Model','Nonfluctuating',...

'MeanRCS',1,'OperatingFrequency',fc);

txloc = [0;0;0];

tgtloc = [5000;5