MATLAB中bode函数的使用及实例
ode :: Functions (Control System Toolbox™) jar:file:///C:/Program%20Files/MATLAB/R2010a/help/toolbox/control/...
bode
Bode diagram of frequency response
Syntax
bode
bode(sys)
bode(sys,w)
bode(sys1,sys2,...,sysN)
bode(sys1,sys2,...,sysN,w)
bode(sys1,'PlotStyle1',...,sysN,'PlotStyleN')
Description
bode computes the magnitude and phase of the frequency response of LTI models. When you
invoke this function without left-side arguments, bode produces a Bode plot on the screen. The
magnitude is plotted in decibels (dB), and the phase in degrees. The decibel calculation for mag is
computed as 20log10 (|H(j ω)|), where |H(j ω)| is the system's frequency response. You can use
bode plots to analyze system properties such as the gain margin, phase margin, DC gain,
bandwidth, disturbance rejection, and stability.
bode(sys) plots the Bode response of an arbitrary LTI model sys. This model can be continuous
or discrete, and SISO or MIMO. In the MIMO case, bode produces an array of Bode plots, each
plot showing the Bode response of one particular I/O channel. The frequency range is determined
automatically based on the system poles and zeros.
bode(sys,w) explicitly specifies the frequency range or frequency points for the plot. To focus on
a particular frequency interval [wmin,wmax], set w = {wmin,wmax}. To use particular frequency
points, set w to the vector of desired frequencies. Use logspace to generate logarithmically
spaced frequency vectors. Specify all frequencies in radians per second (rad/s).
bode(sys1,sys2,...,sysN) or bode(sys1,sys2,...,sysN,w) plots the Bode responses
of several LTI models on a single figure. All systems must have the same number of inputs and
outputs, but they c