wince车机工厂模式德赛西威_求助：winCE 车机救砖问题，进BootLoader，或者TTL调试问题~~...

认识众多玩家高手/拆客/DIYer，查阅更多资源，一起学习技术知识

您需要 登录 才可以下载或查看，没有帐号？立即注册

x

小弟在此谢过了！

winCE  车机  瑞虎517款车机，，无碟导航，没有复位按钮，没有SD卡插槽，只有一个USB接口

前几天弄导航升级，把系统的文件夹，XCEshell内的文件移动了目录 ，，现在开机出现logo后就重启，，

现在无法进入车机系统，车机没有复位按钮，不知道怎么进BootLoader，

拆开看到主板有debug_TX和deuug_RX触点，就接了ttl线，，调试输出的信息如下面文档，

还有个RX和TX接口，，接ttl开机输出是乱码，也不知道怎么回事，，

求助：如何通过ttl进入BootLoader或者文件系统，我只要把那个文件移动回原来的目录即可。

求助：如何刷机或者救砖

求助：维修刷机的思路，或者进入BootLoader的思路，或者如何刷机，或者改变引导~~还有一个事情，，有办法用TTL串口和内核交互吗？？？能交互也许还能有点办法~~本人动手能力强，只是没有维修思路

下面是主板背面图和串口输出信息

车机主板.jpg (213.89 KB, 下载次数: )

串口输出信息

::: PWRC_PDN_CTRL=0xC020, PWRC_PON_STATUS=0x8, PWRC_INT_STATUS=0x0, PWRC_INT_MASK=0x0, PWRC_PIN_STATUS=0x7, PWRC_SCRATCH_PAD1=0x0

OEMInit: PERFMONITOR_WRESP_CONFIG = 0x11111111

g_oalSysInfo.sdInfo[0].bEnabled=1

g_oalSysInfo.sdInfo[1].bEnabled=1

g_o{{+#K鸎sKＳcF碲6-&F

SDMMC booting

sd clk MAX_SD_HIGH_SPEED_CLOCK=50000000 sysclk.dwPll3Clock=600000000

[S][299]: SD(Clk=50000000, Ratio=12), CLKC_SDPHY_CONFIG=0x550004, pll3clk=0x23C34600

SDMLC: Reset & Enable SD 0

SDMLC: Reset & Enable SD 1

SDMLC: Reset & Enable SD 2

SDMMC_Init SD dwSlotId=0 base add:A0300000

SD clock, div=0x0, supported=50000000, max=52000000

going to use 0 div

SDMMC_GetInfo addr 0xA0300000

MiscBinSize=0x18000

InitTocGlobalVariable,g_dwMiscBinSize=98304,g_dwMiscDataSize=0,g_dwTOCStartSector=4881

+TOC_Setup +

ReadTOCSectors start sector 4881 2 sectors, sig 0x434F544E, version 0x28

ReadTOCSectors start sector 4883 2 sectors, sig 0x434F544E, version 0x28

Locate 0th TOC successfully

Eboot's vir sector:                        0x1,toc sector:0x1

nk's vir sector:                                0x1933E,toc sector:0x1933E

secur's vir sector:                        0x1315,toc sector:0x1315

node 0 is created

Windows CE Atlas Bootloader Version 3.3 Built Dec 18 2015 18:00:52

UART-UPDATE Flag: 0xDBADE1C6

BP_Init

SDMMC_GetInfo addr 0xA0300000

mbr blk=0xA1A00200

Image sector starts at physical sector 1933E(1933E)

GetBrightness_

Get Backlight data: (49,49) send Eboot pwr not ok. bytes[8]:0x24

bakstore flag=1. bytes[8]:0x24 isUpdata=2

g_pTOC->dwEbootVer=0x1B pBootArgs->dwBuildDate=0xF0C12

lqc::BootMedia_ReadUserInfo MiscBinStartSector=4926 MiscBinSize=98304 offset=98300 dwBytesPerSector=512

CalibrationData: 1429 1507 2659 405 2680 2558 180 2582 199 394 isSave=5

lqc:save inand(eboot read ):offSetError=16 aGainError=2600 rGainError=3470

BootMedia_ReadLogo>>>>>>>>g_pTOC->logo.dwValid=2,g_pTOC->logo.dwSupported=1,g_BdInfo.wDataBytesPerSector=512 g_pTOC->logo.dwWidth=480>>>>>>>>>g_pTOC->logo.dwHeight=800>>>>>>>>>>>>>>>>>>>>>>>>>>FirstFrameLen=0 g_pTOC->Ani_Logo.wAniLogoFrames=48

lqc eboot ==REARVIEW==dwStatus=0x0

lqc isJumpAniLogo=0

BSP_ANIMATION read logo need times(0), now read the first one(375 Sectors).

BSP_ANIMATION read logo(startup.raw) successfully,(1)Frame is showed !. t0=777 t1=783  readtime=6 showtime=1

+++BspEbootDrawSplashWindow

+++v2 LCD_BootUp

---v2 LCD_BootUp

[L][290]++

LcdBklPwm_Init:lcd PWM was not enable,do it now!

LcdBkl

::: PWRC_PDN_CTRL=0xC020, PWRC_PON_STATUS=0x8, PWRC_INT_STATUS=0x0, PWRC_INT_MASK=0x0, PWRC_PIN_STATUS=0x7, PWRC_SCRATCH_PAD1=0x0

OEMInit: PERFMONITOR_WRESP_CONFIG = 0x11111111

g_oalSysInfo.sdInfo[0].bEnabled=1

g_oalSysInfo.sdInfo[1].bEnabled=1

g_o{{+#K鸎sKＳcF碲6-&F

SDMMC booting

sd clk MAX_SD_HIGH_SPEED_CLOCK=50000000 sysclk.dwPll3Clock=600000000

[S][299]: SD(Clk=50000000, Ratio=12), CLKC_SDPHY_CONFIG=0x550004, pll3clk=0x23C34600

SDMLC: Reset & Enable SD 0

SDMLC: Reset & Enable SD 1

SDMLC: Reset & Enable SD 2

SDMMC_Init SD dwSlotId=0 base add:A0300000

SD clock, div=0x0, supported=50000000, max=52000000

going to use 0 div

SDMMC_GetInfo addr 0xA0300000

MiscBinSize=0x18000

InitTocGlobalVariable,g_dwMiscBinSize=98304,g_dwMiscDataSize=0,g_dwTOCStartSector=4881

+TOC_Setup +

ReadTOCSectors start sector 4881 2 sectors, sig 0x434F544E, version 0x28

ReadTOCSectors start sector 4883 2 sectors, sig 0x434F544E, version 0x28

Locate 0th TOC successfully

Eboot's vir sector:                        0x1,toc sector:0x1

nk's vir sector:                                0x1933E,toc sector:0x1933E

secur's vir sector:                        0x1315,toc sector:0x1315

node 0 is created

Windows CE Atlas Bootloader Version 3.3 Built Dec 18 2015 18:00:52

UART-UPDATE Flag: 0xDBADE1C6

BP_Init

SDMMC_GetInfo addr 0xA0300000

mbr blk=0xA1A00200

Image sector starts at physical sector 1933E(1933E)

GetBrightness_

Get Backlight data: (49,49) send Eboot pwr not ok. bytes[8]:0x4

bakstore flag=0. bytes[8]:0x4 isUpdata=0

g_pTOC->dwEbootVer=0x1B pBootArgs->dwBuildDate=0xF0C12

lqc::BootMedia_ReadUserInfo MiscBinStartSector=4926 MiscBinSize=98304 offset=98300 dwBytesPerSector=512

CalibrationData: 1429 1507 2659 405 2680 2558 180 2582 199 394 isSave=5

lqc:save inand(eboot read ):offSetError=16 aGainError=2600 rGainError=3470

BootMedia_ReadLogo>>>>>>>>g_pTOC->logo.dwValid=2,g_pTOC->logo.dwSupported=1,g_BdInfo.wDataBytesPerSector=512 g_pTOC->logo.dwWidth=480>>>>>>>>>g_pTOC->logo.dwHeight=800>>>>>>>>>>>>>>>>>>>>>>>>>>FirstFrameLen=0 g_pTOC->Ani_Logo.wAniLogoFrames=48

lqc eboot ==REARVIEW==dwStatus=0x0

lqc isJumpAniLogo=0

BSP_ANIMATION read logo need times(0), now read the first one(375 Sectors).

BSP_ANIMATION read logo(startup.raw) successfully,(1)Frame is showed !. t0=259 t1=266  readtime=7 showtime=0

+++BspEbootDrawSplashWindow

+++v2 LCD_BootUp

---v2 LCD_BootUp

[L][290]++

LcdBklPwm_Init:lcd PWM was not enable,do it now!

LcdBklPwm_Control: PwmFlag = 1, PwmPort = 3, PwmSourceClk = 3, PwmOutputFreq = 400, PwmDutyCycle = 85

dwHigh=68, dwLow=11 ,dwPrecision=99

[L][350]--

---BspEbootDrawSplashWindow

update sdcard pull out!

lqc IsEnterDMX

img=2 t0=862 time=26

img=3 t0=1311 time=26

img=4 t0=1337 time=26

lqc BootMedia_ReadAniLogo t0=439, t1=1363, usetime=924  logid=4

INFO: Loading image from Boot Media to RAM (address=0x9F500000, sectors=0x19B1, launch address=0x9F501000)...

IsValidMBR: MBR sector = 0x0

GetPartitionTableIndex: dwPartType = 33 fActive = 1

OpenPartition: Partition Exists=0x1 for part 0x21.

BP_SetDataPointer at 0x0

ReadData: Start = 0x0, Length = 0x19B000.

img=5 t0=1457 time=26

ReadData: Start = 0x19B000, Length = 0x19B200.

img=6 t0=1553 time=25

OEMPreDownload fGotJumpImg = TRUE

Using device name: 'TT6X0BD_0'

-OEMPreDownload: BL_JUMP

::OEMLaunch, ImageStart:0x0, ImageLength:0x0, LaunchAddr:0x0

Eboot setup Kitl from media boot

INFO: using TOC[1] dwJumpAddress: 0x9F501000

!!!!!ratio=0x24424221, src=0x43340432, clkinfo=0x258C8320, voltage=0x48

Jumping to image at virtual address 0x9F501000h

::: Physical Launch Address: 0x1E101000h