参考下面配置，修改Aerospike Server端conf文件。
service {
user root
group root
paxos-single-replica-limit 1 # Number of nodes where the replica count is automatically reduced to 1.
pidfile /var/run/aerospike/asd.pid
service-threads 32
transaction-queues 32
transaction-threads-per-queue 3
proto-fd-max 100000
fabric-workers 96
microbenchmarks true
}
logging {
# Log file must be an absolute path.
file /var/log/aerospike/aerospike.log {
context any info
}
}
network {
service {
address any
port 3000
}
heartbeat {
mode multicast
address 239.1.99.222
port 9918
#interface-address 192.168.1.116
# To use unicast-mesh heartbeats, remove the 3 lines above, and see
# aerospike_mesh.conf for alternative.
#
#mode mesh
#port 3002
#mesh-seed-address-port 192.168.1.116 3002
#mesh-seed-address-port 192.168.1.117 3002
interval 150
timeout 20
}
fabric {
port 3001
}
info {
port 3003
}
}
namespace test {
replication-factor 2
memory-size 75G
default-ttl 30d # 30 days, use 0 to never expire/evict.
high-water-memory-pct 90
high-water-disk-pct 90
# Warning - legacy data in defined raw partition devices will be erased.
# These partitions must not be mounted by the file system.
storage-engine device {
# Use one or more lines like those below with actual device paths.
device /dev/sdb1
#device /dev/sdc1
#device /dev/fioa
# The 2 lines below optimize for SSD.
scheduler-mode noop
write-block-size 128K
# Use the line below to store data in memory in addition to devices.
# data-in-memory true
}
}
329
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
