星载计算机拓扑结构,星载SpaceWire路由器的研究与设计.pdf

本文提出了一种基于SpaceWire的星载路由器设计,结合网络层分析和虫孔路由理论,利用无阻断交差开关解决辐射环境下的数据传输问题。通过Simulink模型和BWR技术,路由器在满负荷通信下平均丢包率降低70%,满足未来航天器数据多路传输需求。
摘要由CSDN通过智能技术生成

第 32 卷第 8 期 电 子 与 信 息 学 报 Vol.32No.8

2010 年 8 月 Journal of Electronics & Information Technology Aug..2010

星载SpaceWire 路由器的研究与设计

毛春静① 关 永① David Jungwirth②

①(首都师范大学信息工程学院 北京 100048)

②(维也纳工业大学 维也纳 奥地利 A-1040)

摘 要:为满足航天器有效载荷间高速数据多路传输的未来发展需求,该文研究提出了基于 SpaceWire 的星载数

据路由的设计方案。在 SpaceWire 总线标准网络层分析的基础上,结合虫孔路由原理构建路由器内部结构,提出

了采用无阻断交差开关的 SpaceWire 路由器设计方案。在 Simulink 环境下建立了路由器仿真模型,并通过 BWR

解决了虫孔路由阻塞机制带来的刹车问题,使路由器的满负荷通信下的平均丢包率减少了 70%。

关键词:卫星通信;空间辐照;SpaceWire;虫孔路由;带缓冲的虫洞路由

中图分类号:TN927 文献标识码:A 文章编号:1009-5896(2010)08-1904-06

DOI: 10.3724/SP.J.1146.2009.00464

Research and Design of on-Board Dynamic SpaceWire Router

① ① ②

Mao Chun-jing Guan Yong David Jungwirth

(College of Information Engineering, Capital Normal University, Beijing 100048, China)

(Vienna University of Technology, Karlsplatz 13 | A-1040 Vienna, Austria)

Abstract: In order to satisfy the requirement of aerocraft’s multi- transmission for further development, this paper

leads to a resolution about on-board SpaceWire routing technology. Based on the network level analysis of

SpaceWire standard, it built the architecture of router with wormhole routing theory and non-blocking switch

mechanism. A simulation model of router had been set to verify the design, and braking-problem from wormhole

routing-blocking had been solved with BWR (Buffered Wormhole Routing), it reduces 70% average packet-losing

ratio on full load communication.

Key words: Satellite communication; Space radiation;

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值