路由器通电;U-Boot 1.1.3 config usb.. 10、在出现"config usb.."文字时,按“2”;******************************Software System Reset Occurred ****************************** __________________________________________________________________ | ______ ___ ____ ___ _ _ | | / ___\ \ / / \ |___ \ / _ \/ / | ___ ___ _ __ ___ | | | | _ \ \ /\ / / _ \ __) | | | | | | / __/ _ \| '_ ` _ \ | | | |_| | \ V V / ___ \ / __/| |_| | | || (_| (_) | | | | | | | | \____| \_/\_/_/ \_\_____|\___/|_|_(_)___\___/|_| |_| |_| | | | | Global Wireless Alliance | | http://www.gwa2011.com | | E-Mail:2579131212@qq.com | | Dreambox Team 2012 | |________________________________________________________________| Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
You choosed 2
0 eth_register Eth0 (10/100-M) enetvar=ethaddr,Eth addr:00:0C:43:09:26:BB eth_current->name = Eth0 (10/100-M) 2: System Load Linux Kernel then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one.
Are you sure?(Y/N) 输入“Y”,
并按照下面输入相应信息:Please Input new ones /or Ctrl-C to discard Input device IP (192.168.1.1) ==:192.168.1.1 Input server IP (192.168.1.100) ==:192.168.1.100
Input Linux Kernel filename () ==:0223.bin输入回车,刷机开始开始刷机。正确TFTP传输文件时,电脑TFTP上面会显示如下信息,表明TFTP开始传输文件
。 TFTP文件传输完毕。路由器删除FLASH,并将固件写入FLASH。