Actually the best thing you can do is replace your battery by a new one, it would be dangerous to your switch if you keep using this one.

the same thing happened to me i acidentally updated the system (it was not your pokemon, but the pop up appeared where you tried to open, happened with me on new super mario u deluxe), and Skonikol is right, if you updated the syste, you'll have to wait for the cfw update. What may not take so long...

As mentioned by the author i am also trying to convert speech to text directly without using a .wav file. I am using pyaudio to record an audio stream and i am trying to convert the stream directly once i stop recording. To verify that the recording is correct, i am also saving the stream into a .wav file. below is the implementation. CHUNK = 1024 FORMAT = pyaudio.paInt16 CHANNELS = 2 RATE = 44100 RECORD_SECONDS = 5 WAVE_OUTPUT_FILENAME = get_nonexistant_path("voice.wav") p = pyaudio.PyAudio() stream = p.open(format=FORMAT, channels=CHANNELS, rate=RATE, input=True, frames_per_buffer=CHUNK) print("* recording") aud_width = p.get_sample_size(FORMAT) frames = [] for i in range(0, int(RATE / CHUNK * RECORD_SECONDS)): data = stream.read(CHUNK) frames.append(data) print("* done recording") r = sr.Recognizer() audio_bytes = b''.join(frames) audio_source = sr.AudioData(audio_bytes, RATE, aud_width) try: print('Trying to convert') text = r.recognize_google(audio_data=audio_source, language='en-US', show_all=True) print(text) except sr.UnknownValueError: print("Could not understand") stream.stop_stream() stream.close() p.terminate() wf = wave.open(WAVE_OUTPUT_FILENAME, 'wb') wf.setnchannels(CHANNELS) wf.setsampwidth(p.get_sample_size(FORMAT)) wf.setframerate(RATE) wf.writeframes(b''.join(frames)) wf.close() When i run the program the output is '[ ]'. When i run the translating using the wave file, i get correct output. Can someone please help me.

same issue for me also did u solve it?

I didn't find a fix for it but I found a workaround which worked fine for me. Instead of directly trying to convert the stream to text, I first the stream to a .wav file and then used speech recognition on that file. So basically I was just rewriting on that .wav file after speech to text conversion. Hope this helps.

Can you please share how you did it to me?
My mail id is rayavarapuvikram1.com

As mentioned by the author i am also trying to convert speech to text directly without using a .wav file. I am using pyaudio to record an audio stream and i am trying to convert the stream directly once i stop recording. To verify that the recording is correct, i am also saving the stream into a .wav file. below is the implementation.

`CHUNK = 1024 FORMAT = pyaudio.paInt16 CHANNELS = 2 RATE = 44100 RECORD_SECONDS = 5 WAVE_OUTPUT_FILENAME = get_nonexistant_path("voice.wav")

p = pyaudio.PyAudio()

stream = p.open(format=FORMAT, channels=CHANNELS, rate=RATE, input=True, frames_per_buffer=CHUNK)

print("* recording") aud_width = p.get_sample_size(FORMAT) frames = []

for i in range(0, int(RATE / CHUNK * RECORD_SECONDS)): data = stream.read(CHUNK) frames.append(data)

print("* done recording")

r = sr.Recognizer()

audio_bytes = b''.join(frames) audio_source = sr.AudioData(audio_bytes, RATE, aud_width)

try: print('Trying to convert') text = r.recognize_google(audio_data=audio_source, language='en-US', show_all=True) print(text)

except sr.UnknownValueError: print("Could not understand")

stream.stop_stream() stream.close() p.terminate()

wf = wave.open(WAVE_OUTPUT_FILENAME, 'wb') wf.setnchannels(CHANNELS) wf.setsampwidth(p.get_sample_size(FORMAT)) wf.setframerate(RATE) wf.writeframes(b''.join(frames)) wf.close() ` When i run the program the output is '[ ]'. When i run the translating using the wave file, i get correct output. Can someone please help me.

same issue for me also did u solve it?

What is your current setup now and how do you install Clippy right now?

apt-get install cargo (+rustc) (cause its easy, always up-to-date within a week or two (on debian testing, at least), and cross-language LTO and even LLVM plugins Just Work (tm) cause its all linked again system LLVM. As for clippy, well, I have to spin up a VM with rustup to use clippy, which is somewhat annoying (afaict - is there some easier way that works - cargo install clippy hasn't worked in a long time).

To rephrase, does that imply clippy will never (again) be available on non-rustup installs (which seems to have been hinted at as a side-effect earlier in this issue).

What does this imply for non-rustup users who wish to use clippy?

Fixed, thanks!

Awesome! Thanks, George 👍 (I had tested it on Safari 9.1 and Firefox 46.0.1 -- glad to know though that I'm not crazy and you've had related issues)

Hi Stephen,

Upgrade is not possible at the moment, as we have to do lot of code changes to get compatible with Titan 1.x. Recently we have started the replica of our production environment for reporting and we are using Titan-Hadoop, unfortunately when we run any job, we are getting the below exception.

java.lang.Exception: java.lang.IllegalArgumentException: Could not instantiate implementation: com.thinkaurelius.titan.hadoop.formats.util.input.current.TitanHadoopSetupImpl

at org.apache.hadoop.mapred.LocalJobRunner$Job.run(LocalJobRunner.java:403)

Caused by: java.lang.IllegalArgumentException: Could not instantiate implementation: com.thinkaurelius.titan.hadoop.formats.util.input.current.TitanHadoopSetupImpl

at com.thinkaurelius.titan.util.system.ConfigurationUtil.instantiate(ConfigurationUtil.java:55)

at com.thinkaurelius.titan.hadoop.formats.util.TitanInputFormat.getGraphSetup(TitanInputFormat.java:49)

at com.thinkaurelius.titan.hadoop.formats.cassandra.TitanCassandraRecordReader.initialize(TitanCassandraRecordReader.java:44)

at org.apache.hadoop.mapred.MapTask$NewTrackingRecordReader.initialize(MapTask.java:524)

at org.apache.hadoop.mapred.MapTask.runNewMapper(MapTask.java:762)

at org.apache.hadoop.mapred.MapTask.run(MapTask.java:339)

at org.apache.hadoop.mapred.LocalJobRunner$Job$MapTaskRunnable.run(LocalJobRunner.java:235)

at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)

at java.util.concurrent.FutureTask.run(FutureTask.java:266)

at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)

at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)

at java.lang.Thread.run(Thread.java:745)

Caused by: java.lang.reflect.InvocationTargetException

at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)

at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

at java.lang.reflect.Constructor.newInstance(Constructor.java:422)

at com.thinkaurelius.titan.util.system.ConfigurationUtil.instantiate(ConfigurationUtil.java:44)

... 11 more

Caused by: java.lang.IllegalStateException: Could not find type for id: 247829

at com.google.common.base.Preconditions.checkState(Preconditions.java:177)

at com.thinkaurelius.titan.graphdb.types.vertices.TitanSchemaVertex.getName(TitanSchemaVertex.java:45)

at com.thinkaurelius.titan.graphdb.schema.EdgeLabelDefinition.(EdgeLabelDefinition.java:20)

at com.thinkaurelius.titan.graphdb.schema.SchemaContainer.(SchemaContainer.java:34)

at com.thinkaurelius.titan.hadoop.formats.util.input.current.TitanHadoopSetupImpl.(TitanHadoopSetupImpl.java:40)

... 16 more

Please find our properties file here...

conf/hadoop/titan-cassandra-input.properties

input graph parameters

titan.hadoop.input.format= com.thinkaurelius.titan.hadoop.formats.cassandra.TitanCassandraInputFormat

titan.hadoop.input.conf.storage.backend=cassandrathrift

titan.hadoop.input.conf.storage.hostname=

titan.hadoop.input.conf.storage.port=

titan.hadoop.input.conf.storage.cassandra.keyspace=titan

titan.hadoop.input.conf.index.search.backend=elasticsearch

titan.hadoop.input.conf.index.search.hostname=

cassandra.input.partitioner.class= org.apache.cassandra.dht.Murmur3Partitioner

cassandra.input.split.size=512

cassandra.thrift.framed.size_mb=160

cassandra.thrift.message.max_size_mb=161

output data (graph or statistic) parameters

titan.hadoop.sideeffect.format= org.apache.hadoop.mapreduce.lib.output.TextOutputFormat

titan.hadoop.output.format= com.thinkaurelius.titan.hadoop.formats.graphson.GraphSONOutputFormat

titan.hadoop.output.conf.storage.batch-loading=true

titan.hadoop.output.conf.storage.infer-schema=true

It is possible to provide Hadoop configuration parameters

Note that these parameters are provided to each MapReduce job within the

entire Titan/Hadoop job pipeline

Some of these parameters may be over written by Titan/Hadoop as deemed

necessary

mapred.linerecordreader.maxlength=5242880

mapred.map.child.java.opts=-Xmx1024m

mapred.reduce.child.java.opts=-Xmx1024m

mapred.map.tasks=6

mapred.reduce.tasks=3

mapred.job.reuse.jvm.num.tasks=-1

mapred.task.timeout=5400000

mapred.reduce.parallel.copies=50

io.sort.factor=100

io.sort.mb=200

A quick help would be highly appreciable.

Thanks,

Karteek.

On Wed, Nov 25, 2015 at 4:12 PM, stephen mallette notifications.com wrote:

I'm reasonably sure this was closed as https://github.com/dalaro was unable to reproduce the problem and no additional information was supplied. It would be interesting to know if Titan 1.x has this problem. I'm not sure if you are in a position to upgrade, but you might try that as an option.

— Reply to this email directly or view it on GitHub https://github.com/thinkaurelius/titan/issues/904#issuecomment-159568068 .

I am facing the same issues reported by "boliza" on titan-0.5.4. What is the resolution???