前提:已经存在python2.6,目前已经成功安装了python3.7。
问题:
python -V/pip list :提示报错
python3 -V/pip3 list :正常
1.查看python指向:
ls -l /usr/bin | grep python
root@Adfuser-Test lib]#ls -l /usr/bin | grep python
-rwxr-xr-x. 1 root root 6808 6月 19 2018 abrt-action-analyze-python
lrwxrwxrwx.1 root root 30 12月 26 14:04 python -> /usr/local/python3/bin/python3
lrwxrwxrwx.1 root root 6 12月 25 17:43 python2 ->python-rwxr-xr-x. 2 root root 4864 6月 20 2019 python2.6lrwxrwxrwx.1 root root 30 12月 26 14:17 python3 -> /usr/local/python3/bin/python3-rwxr-xr-x. 2 root root 4864 6月 20 2019python.back-rwxr-xr-x. 1 root root 9032 8月 18 2016 python.bak
由上图可知python和python3都指向——>/usr/local/python3/bin/python3
于是我直接进去这个地址,看是否正确。
[root@Adfuser-Test lib]#cd /usr/local/python3/bin/python3
-bash: cd: /usr/local/python3/bin/python3: 没有那个文件或目录
[root@Adfuser-Test lib]#cd /usr/local/python
-bash: cd: /usr/local/python: 没有那个文件或目录
[root@Adfuser-Test lib]#cd /usr/local/python3
[root@Adfuser-Test python3]#ll
总用量 16572drwxr-xr-x. 18 501 501 4096 12月 25 18:05 Python-3.7.1
-rw-r--r--. 1 root root 16960060 10月 20 2018 Python-3.7.1.tar.xz
2.提示没有哪个路径,于是我这里需要找到正确的地址,并重新软链接地址
[root@Adfuser-Test python3]#cd ..
[root@Adfuser-Test local]#cd bin
[root@Adfuser-Test bin]#ll
总用量 18944lrwxrwxrwx.1 root root 8 12月 25 19:06 2to3 -> 2to3-3.7
-rwxr-xr-x. 1 root root 101 12月 25 19:06 2to3-3.7
-rwxr-xr-x. 1 root root 242 12月 25 19:06 easy_install-3.7lrwxrwxrwx.1 root root 7 12月 25 19:06 idle3 -> idle3.7
-rwxr-xr-x. 1 root root 99 12月 25 19:06 idle3.7
-rwxr-xr-x. 1 root root 223 12月 26 15:18pip-rwxr-xr-x. 2 root root 223 12月 26 15:18pip3-rwxr-xr-x. 1 root root 223 12月 26 15:18 pip3.7lrwxrwxrwx.1 root root 8 12月 25 19:06 pydoc3 -> pydoc3.7
-rwxr-xr-x. 1 root root 84 12月 25 19:06 pydoc3.7lrwxrwxrwx.1 root root 9 12月 25 19:06 python3 -> python3.7
-rwxr-xr-x. 2 root root 9675760 12月 25 19:04 python3.7lrwxrwxrwx.1 root root 17 12月 25 19:06 python3.7-config -> python3.7m-config-rwxr-xr-x. 2 root root 9675760 12月 25 19:04python3.7m-rwxr-xr-x. 1 root root 3083 12月 25 19:06 python3.7m-config
lrwxrwxrwx.1 root root 16 12月 25 19:06 python3-config -> python3.7-config
lrwxrwxrwx.1 root root 10 12月 25 19:06 pyvenv -> pyvenv-3.7
-rwxr-xr-x. 1 root root 441 12月 25 19:06 pyvenv-3.7
-rwxr-xr-x. 1 root root 214 12月 26 15:18wheel
[root@Adfuser-Test bin]#pwd
/usr/local/bin
[root@Adfuser-Test bin]#
3.因为python3.7安装时,执行的是./configure --prefix=/usr/local/python3.7.1,则为:
[root@Adfuser-Test bin]#mv /usr/bin/python /usr/bin/python.bak
mv:是否覆盖"/usr/bin/python.bak"?
[root@Adfuser-Test bin]#ln -s /usr/local/bin/python3.7 /usr/bin/python
ln: 创建符号链接 "/usr/bin/python": 文件已存在
[root@Adfuser-Test bin]#rm -rf /usr/bin/python
[root@Adfuser-Test bin]#ln -s /usr/local/bin/python3.7 /usr/bin/python
[root@Adfuser-Test bin]#mv /usr/bin/pip /usr/bin/pip.bak
[root@Adfuser-Test bin]#ln -s /usr/local/bin/pip3 /usr/bin/pip
4.最后:输入python验证
[root@Adfuser-Test bin]#python
Python 3.7.1 (default, Dec 25 2019, 19:03:06)
[GCC4.4.7 20120313 (Red Hat 4.4.7-23)] on linux
Type"help", "copyright", "credits" or "license" formore information.>>>
成功!
ps注意:这里每个人的安装路径都不一致,大致可供参考。