matlab 安装完了又叫安装,安装好2010b后按照这些提示我还需装些什么？

我安装的是2010b版，在安装过程的后期跳出一个消息框，说还需要再安装一些第三方编译器，但是又没有说这些编译器的名称，哪位朋友告诉我一下。

另外，我电脑上没有装任何编程软件，请问我装c编译器好，还是c++编译器好？还是都可以？

1. The following products require a supported compiler:  MATLAB Compiler 4.14 MATLAB Builder NE 3.2 MATLAB Builder JA 2.2 MATLAB Builder EX 1.3 Stateflow 7.6 Real-Time Workshop 7.6 xPC Target 4.4

2. Simulink requires a C compiler for simulation acceleration, model reference, and Embedded MATLAB capabilities. It is recommended that you install a supported compiler on your machine.

3. To accelerate computations with the following products, a supported compiler is required:  SimBiology 3.3 Fixed-Point Toolbox 3.2

4. To configure Real-Time Windows Target you must type rtwintgt -setup in a MATLAB command window.

5. After this installation is complete, you should continue with your configuration of the MATLAB Distributed Computing Server as outlined in the instructions from distconfig.

6. You have installed xPC Target. Use the xPC Target Explorer GUI (type xpcexplr in the MATLAB Command Window) to correctly configure xPC Target with a valid compiler pathname. For further help, type doc xpcexplr.

7. Run mbuild -setup from MATLAB before using MATLAB Compiler or builder products.