H3C交换机显示某个接口流量时,有一个Input和Output的值,如下红色字所示:
GigabitEthernet1/1/1 current state : UP
IP Sending Frames’ Format is PKTFMT_ETHNT_2, Hardware address is 000f-e260-e42f
Media type is optical fiber, loopback not set
Port hardware type is 1000_BASE_SX_SFP
1000Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
The Maximum Frame Length is 9216
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
Allow jumbo frame to pass
PVID: 1
Mdi type: auto
Port link-type: trunk
VLAN passing : 1(default vlan), 2-27, 102-130, 160-163, 166, 300
VLAN permitted: 1(default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Last 300 seconds input: 16486 packets/sec 13358694 bytes/sec</