ac ap方案 华为_华为AC+AP无线的配置方法

华为AC+AP无线配置方法

组网示意图：

前提条件：

1)所有设备工作正常

2)依据上述组网建立测试环境

1)正确配置AC使AP发放SSID:“SSID-Temp1”、“SSID-Temp2”和“SSID-Temp3”，且对应业务vlan为：vlan-1，vlan-2，vlan-3；

配置Switch

[Switch]vlan batch 100 101 102 103

[Switch]interface GigabitEthernet0/0/1

[Switch-GigabitEthernet0/0/1]description Link-to-AP

[Switch-GigabitEthernet0/0/1]port link-type trunk

[Switch-GigabitEthernet0/0/1]port trunk pvid vlan 100

[Switch-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101 102 103 [Switch-GigabitEthernet0/0/1]quit

[Switch]interface GigabitEthernet0/0/2

[Switch-GigabitEthernet0/0/2]description Link-to-AC

[Switch-GigabitEthernet0/0/2]port link-type trunk

[Switch-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 101 102 103 [Switch-GigabitEthernet0/0/2]quit

配置AC

1.配置接口和VLAN信息，AC为DHCP Server，为AP和client分配地址

[AC]vlan batch 100 101 102 103

[AC]interface GigabitEthernet0/0/1

[AC-GigabitEthernet0/0/1]description Link-to-SW

[AC-GigabitEthernet0/0/1]port link-type trunk

[AC-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101 102 103

[AC-GigabitEthernet0/0/1]quit