20161215请问全志的android平台的kernel启动早期的 打印信息 全关了吗
开发板:索智SC3817。全志R16
SDK:android4.4.2 parrotv1.1
打开的方法:
rootroot@rootroot-E400:~/wyb/bt1_parrot_v1.1_20161212/lichee/linux-3.4$ cp .config bak1_orig.config
rootroot@rootroot-E400:~/wyb/bt1_parrot_v1.1_20161212/lichee/linux-3.4$ make ARCH=arm menuconfig
Security options --->
(关闭这里)
[*] NSA SELinux Support
[ ] NSA SELinux boot parameter
[ ] NSA SELinux runtime disable
[*] NSA SELinux Development Support
[*] NSA SELinux AVC Statistics
(1) NSA SELinux checkreqprot default value
[ ] NSA SELinux maximum supported policy format version
General setup --->
(16) Kernel log buffer size (16 => 64KB, 17 => 128KB)
修改为:
(18) Kernel log buffer size (16 => 64KB, 17 => 128KB)
rootroot@rootroot-E400:~/wyb/bt1_parrot_v1.1_20161212/lichee/linux-3.4$ diff .config bak1_orig.config
85c85
---
> CONFIG_LOG_BUF_SHIFT=16
rootroot@rootroot-E400:~/wyb/bt1_parrot_v1.1_20161212/lichee/linux-3.4$
CONFIG_LOG_BUF_SHIFT:
Select kernel log buffer size as a power of 2.
Examples:
17 => 128 KB
16 => 64 KB
15 => 32 KB
14 => 16 KB
13 => 8 KB
12 => 4 KB
Symbol: LOG_BUF_SHIFT [=16]
Type : integer
Range : [12 21]Prompt: Kernel log buffer size (16 => 64KB, 17 => 128KB)
Defined at init/Kconfig:559
Location:
-> General setup
[ 0.333]U-Boot 2011.09-rc1-00019-g42e29c6-dirty (Mar 19 2015 - 17:08:40) Allwinner Technology
[0.346]normal or secure os
[0.348]pmbus: ready
[0.350]PMU: AXP221
[0.352]PMU: AXP22x found
[0.355]bat_vol=0, ratio=100
[0.358]PMU: dcdc3 1200
[0.360]PMU: pll1 1008 Mhz,PLL6=600 Mhz
[0.363]AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
[0.370]set power on vol to default
[0.373]dcdc1_vol = 3000
[0.376]dcdc2_vol = 1100
[0.378]dcdc3_vol = 1200
[0.380]dcdc4_vol = 0
[0.382]dcdc5_vol = 1500
[0.384]aldo2_vol = 2500
[0.386]aldo3_vol = 3000
[0.388]dldo3_vol = 2800
[0.391]ldoio0_vol = 2800
[0.393]find power_sply to end
[0.473]vbus exist
[0.474]no battery, limit to dc
[0.477]fel key new mode
[0.479]run key detect
[0.492]no key found
[0.493]no key input
[0.495]dram_para_set start
[0.499]dram_para_set end
[0.501]DRAM: [0.503]512[0.503] MiB
[0.505]relocation Offset is: 15b0a000
[0.546]smcl's set manager is NULL
[0.549]
[0.551]workmode = 0
[0.553]MMC: 2
[0.554][mmc]: mmc driver ver 2014-12-10 9:23:00
[0.559][mmc]: get sdc_phy_wipe fail.
[0.562][mmc]: get sdc0 sdc_erase fail.
[0.565][mmc]: get sdc_2xmode ok, val = 1
[0.569][mmc]: get sdc_ddrmode ok, val = 1
[0.573][mmc]: get sdc_f_max fail,use default 50000000Hz
[0.578][mmc]: get card_line ok, card_line = 8
[0.582][mmc]: get sdc_ex_dly_used fail,use default
[0.586][mmc]: SUNXI SD/MMC: 2[0.589]
[0.600][mmc]: MMC card 2*
[0.638][mmc]: ddr8
[0.652][mmc]: CID 0x1501004d 0x34473146 0x42001e19 0xbdf5ce85
[0.657][mmc]: MMC ver 4.41
[0.659][mmc]: mmc clk 50000000
[0.662][mmc]: SD/MMC Card: 8bit, capacity: 3728MB
[0.666][mmc]: boot0 capacity: 1000KB,boot1 capacity: 1000KB
[0.672][mmc]: ***SD/MMC 2 init OK!!!***
[0.676][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
[0.681][mmc]: secure_feature 0x15
[0.684][mmc]: secure_removal_type 0x0
[0.688]sunxi flash init ok
In: serial
Out: serial
Err: serial
[0.700]--------fastboot partitions--------
[0.704]-total partitions:11-
[0.706]-name- -start- -size-
[0.710]bootloader : 1000000 2000000
[0.715]env : 3000000 1000000
[0.719]boot : 4000000 1000000
[0.723]system : 5000000 30000000
[0.727]data : 35000000 40000000
[0.732]misc : 75000000 1000000
[0.736]recovery : 76000000 2000000
[0.740]cache : 78000000 20000000
[0.744]databk : 98000000 8000000
[0.749]private : a0000000 1000000
[0.753]UDISK : a1000000 0
[0.757]-----------------------------------
[0.761]base bootcmd=run setargs_nand boot_normal
[0.765]bootcmd set setargs_mmc
[0.768]key 0
[0.769]cant find rcvy value
[0.772]cant find fstbt value
[0.774]misc partition found
[0.778]to be run cmd=run setargs_mmc boot_normal
[0.782]WORK_MODE_BOOT
[0.784]board_status_probe
[0.786]sunxi_bmp_logo_display
[0.790]
** Unable to read "bootlogo.bmp" from sunxi_flash 0:1 **
[0.796]sunxi bmp info error : unable to open logo file bootlogo.bmp
[0.802]Hit any key to stop autoboot: 3 [1.8 2 [2.9 1 [4. 0
[4.61]read boot or recovery all
[4.331]sunxi flash read :offset 4000000, 12749517 bytes OK
[4.338]no signature
[4.340]ready to boot
[4.342]para err in disp_ioctl, cmd = 0xa,screen id = 1
[ 4.347]Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
20:32 CST 2016
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] cma: CMA: reserved 120 MiB at 58800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c099f380, node_mem_map c0b47000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129920 pages, LIFO batch:31
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fdb000 s10688 r8192 d13888 u32768
[ 0.000000] pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
onfig_size=39212