如图
1 修改/etc/sysconfig/network-scripts/下网卡名称
[root@centos7 ~]# cd /etc/sysconfig/network-scripts/
[root@centos7 network-scripts]# mv ifcfg-ens32 ifcfg-eth0
2 修改ifcfg-eth0配置文件内网卡和设备名称
[root@centos7 network-scripts]# vim ifcfg-eth0
TYPE=Ethernet
BOOTPROTO=static
NAME=eth0 # 修改为eth0
DEVICE=eth0 # 修改为eth0
ONBOOT=yes
IPADDR=192.168.10.10
GATEWAY=192.168.10.2
DNS1=114.114.114.114
3 修改并生成grub配置
添加“net.ifnames=0 biosdevname=0”
[root@centos7 ~]# vim /etc/sysconfig/grub
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb net.ifnames=0 biosdevname=0 quiet" # 在quiet后添加参数
GRUB_DISABLE_RECOVERY="true"
生成grub启动菜单
[root@centos7 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.10.0-957.el7.x86_64
Found initrd image: /boot/initramfs-3.10.0-957.el7.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-2ad32aaabaf5452896823106c63e302d
Found initrd image: /boot/initramfs-0-rescue-2ad32aaabaf5452896823106c63e302d.img
done
4 重启验证
没有
ifconfig
命令,可以使用yum install -y net-tools
安装
[root@centos7 ~]# reboot
# 使用ifconfig查看
[root@centos7 ~]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.10 netmask 255.255.255.0 broadcast 192.168.10.255
inet6 fe80::20c:29ff:fee1:1ed5 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:e1:1e:d5 txqueuelen 1000 (Ethernet)
RX packets 142 bytes 15229 (14.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 140 bytes 21086 (20.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
开始安装系统的界面,选择到“Install CentOS 7”
在quit后面添加:net.ifnames=0 biosdevname=0
按回车健进行系统安装
系统安装完成,使用ifconfig
查看网卡名是否改为eth0