准备工作
| 系统 |IP |节点角色 |CPU |Memory |Hostname|
|–|–|–|–|–|–|–|
|Centos7.8|192.168.200.211|Master|2|4|k8s_master01|
|Centos7.8|192.168.200.212|Master|2|4|k8s_master02|
|Centos7.8|192.168.200.213|Master|2|4|k8s_master03|
|Centos7.8|192.168.200.221|Node|1|1|k8s_node01|
|Centos7.8|192.168.200.222|Node|1|1|k8s_node02|
|Centos7.8|192.168.200.201|LVS|1|1|lvs_master|
|Centos7.8|192.168.200.202|LVS|1|1|lvs_backup|
|–|192.168.200.200|vip|–|–vip|
- 安装操作系统时候选择额computer node,这样方便一点
- 设置ip地址、hostname、dns
可视化配置，运行nmtui，在弹出的页面配置即可
[root@master01 ~]#nmtui
手工配置
[root@master01 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eno16777736
#主要修改
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.100.101
NETMASK=255.255.255.0
GATEWAY=192.168.200.2
DNS1=8.8.8.8
DNS2=114.114.114.114
修改网卡名称（非必要操作，我是看着一大串难受自己改的）
例子：修改eno16777736为eno33
查看物理网卡地址（当然啦，这里是虚拟机里面的，不要纠结）
是否看到eno16777736后的 00:0c:29:8d:e5:09，复制一下，等下用
[root@master01 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:8d:e5:09 brd ff:ff:ff:ff:ff:ff
inet 192.168.200.107/24 brd 192.168.200.255 scope global dynamic eno16777736
valid_lft 311sec preferred_lft 311sec
inet6 fe80::20c:29ff:fe8d:e509/64 scope link
valid_lft forever preferred_lft forever
开始修改
[root@master01 ~]# vim /etc/udev/rules.d/90-eno-fix.rules
#Name改为你要的名称即可
# ATTR{address}=="00:0c:29:8d:e5:09"替换成你自己的地址
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8d:e5:09", NAME="eno33"
将名字更新为你设置的名字
[root@master01 ~]# cd /etc/sysconfig/network-scripts && mv ifcfg-eno16777736 ifcfg-eno33
修改配置文件中的NAME=eno33和DEVICE=eno33
[root@master01 network-scripts]# vim ifcfg-eno33
重启就能看到网卡name已经修改了
- 更新一下系统
[root@master01 ~]#yum update
- 关闭sshd中的nds
这样做的目的是为了再使用sshd远程时候连接快一点，不关闭也不会有什么影响，只是在发起连接的时候稍微慢一点
[root@master01 ~]#vim /etc/ssh/sshd_config
#添加一行
useDNS no
#修改后重启sshd
[root@master01 ~]#systemctl restart sshd
1. 时间同步
#测试环境操作
[root@master01 ~]# systemctl restart chronyd
2. 关闭swap
每一台都要做
vim /etc/fstab
注释掉swap所在行，reboot或者swapoff -a 关闭swap让其生效
或
sed -i 's/^[^#].*swap/#&/' /etc/fstab
#意思是：
#将含内有swap且不以#号开始的行前面加上#
[^#]:非#号
^锚定行首
^[^#]：非#号开头
&：整行
#&:在行首加上#，a&在行首加上a字母
此时运行free 看到swap分区大小显示为0
没关swap
#关闭前
[root@master01 ~]# free -h
total used free shared buff/cache available
Mem: 3.7G 163M 3.4G 8.5M 174M 3.3G
Swap: 2.0G 0B 2.0G
#关闭
[root@master01 ~]# swapoff -a
#关闭后
[root@master01 ~]# free -h
total used free shared buff/cache available
Mem: 3.7G 161M 3.4G 8.5M 174M 3.3G
Swap: 0B 0B 0B
#永久关闭或者你vim 打开/etc/fstab，注释掉swap行，重启，效果一样
[root@master01 ~]# sed -i '/swap/s/^\(.*\)$/#\1/g' /etc/fstab
3. 禁用seinux
sed -i ‘s@SELINUX=enforcing@SELINUX=disabled@’ /etc/selinux/config
#关闭前
[root@master01 ~]# getenforce
Enforcing
#关闭
[root@master01 ~]# setenforce 0
#关闭后
[root@master01 ~]# getenforce
Permissive
#永久关闭
[root@master01 ~]# vim /etc/selinux/config
SELINUX=enforcing改为SELINUX=disabled
4. 关闭firewalld
命令：systemctl stop firewalld && systemctl disable firewalld
[root@master01 ~]# systemctl status firewalld
firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled)
Active: active (running) since Mon 2021-05-03 17:36:50 CST; 19min ago
Main PID: 857 (firewalld)
CGroup: /system.slice/firewalld.service
└─857 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid
May 03 17:36:50 master01 systemd[1]: Started firewalld - dynamic firewall daemon.
[root@master01 ~]# systemctl stop firewalld && systemctl disable firewalld
rm '/etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service'
rm '/etc/systemd/system/basic.target.wants/firewalld.service'
[root@master01 ~]#
5. 清理iptables规则
# 清理防火墙规则，设置默认转发策略
[root@master01 ~]# iptables -F && iptables -X && iptables -F -t nat && iptables -X -t nat && iptables -P FORWARD ACCEPT
#不用-t指定表名时默认指定filter表，相当于-t filter
#iptables -F：清空filter表的规则
#iptables -X：清空filter表自定规则
#iptables -F -t nat：清空net表规则
#iptables -X -t nat：清空net表自定义规则
# iptables -P FORWARD ACCEPT 将内置FORWARD链上的默认规则改为ACCEPT
6. 修改hosts文件(添加)
cat <<EOF >> /etc/hosts
192.168.100.100 k8svip
192.168.100.101 master01
192.168.100.102 master02
192.168.100.103 master03
192.168.100.111 worker01
192.168.100.112 worker02
192.168.100.113 worker03
EOF
master双核cpu，node三台，总的四台
软件：（四台机器都需要安装！！！，可以先安装一台然后克隆）
docker 容器引擎
kubeadm
kubelet 集群代理
kubcli k8s的命令行工具，用来与APIserver交互的，装在master上就可以了
工作原理
the number of available CPUs 1 is less than the required 2
7. 保证系统能上网
8. 安装docker
9. 开启ntp同步
略
10. 启用ipvs内核模块
设置为开机启动
[root@master01 /]# vim /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
#内核模块路径
ipvs_mods_dir="/usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs"
for mod in $(ls $ipvs_mods_dir | grep -o "^[^.]*"); do
/sbin/modinfo -F filename $mod &> /dev/null
if [[ $? -eq 0 ]]; then
/sbin/modprobe $mod
fi
done
[root@master01 /]# chmod +x /etc/sysconfig/modules/ipvs.modules
开始安装
打开地址，找到kubernetes,点击后面对应的帮助
阿里镜像源
帮助内容如下（照做就行）
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
setenforce 0
#你可以选择安装1.18版本或者最新版，最新版不一定能获取到相关镜像，学习建议就用1.18
yum install -y kubelet-1.18.0 kubeadm-1.18.0 kubectl-1.18.0
yum install -y kubelet kubeadm kubectl
systemctl enable kubelet && systemctl start kubelet
echo 'KUBELET_EXTRA_ARGS="--fail-swap-on=false"'> /etc/sysconfig/kubelet
查看默认书初始化设置是否与实际相符
- kubernetesVersion: v1.18.0
- serviceSubnet: 10.96.0.0/12
- imageRepository: k8s.gcr.io
[root@localhost ~]# kubeadm config print init-defaults
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
- system:bootstrappers:kubeadm:default-node-token
token: abcdef.0123456789abcdef
ttl: 24h0m0s
usages:
- signing
- authentication
kind: InitConfiguration
localAPIEndpoint:
advertiseAddress: 1.2.3.4
bindPort: 6443
nodeRegistration:
criSocket: /var/run/dockershim.sock
name: master01
taints:
- effect: NoSchedule
key: node-role.kubernetes.io/master
---
apiServer:
timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
type: CoreDNS
etcd:
local:
dataDir: /var/lib/etcd
imageRepository: k8s.gcr.io
kind: ClusterConfiguration
kubernetesVersion: v1.16.0
networking:
dnsDomain: cluster.local
serviceSubnet: 10.96.0.0/12
scheduler: {}
关机克隆，略
克隆完成以后自己改一下网卡配置文件，通常是会有问题i的,决绝方案使用nmtui工具，将需要原有网卡删掉，重新添加一个，重启一下，配置就可以了。
nmtui
#拉取镜像
kubeadm config images pull --image-repository="registry.aliyuncs.com/google_containers"
#好了，你可去玩了，反正我等了好久，刷了好久视频才下好
#完成后可以看到如下
[root@master01 /]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
registry.aliyuncs.com/google_containers/kube-proxy v1.18.0 43940c34f24f 13 months ago 117MB
registry.aliyuncs.com/google_containers/kube-scheduler v1.18.0 a31f78c7c8ce 13 months ago 95.3MB
registry.aliyuncs.com/google_containers/kube-controller-manager v1.18.0 d3e55153f52f 13 months ago 162MB
registry.aliyuncs.com/google_containers/kube-apiserver v1.18.0 74060cea7f70 13 months ago 173MB
registry.aliyuncs.com/google_containers/pause 3.2 80d28bedfe5d 15 months ago 683kB
registry.aliyuncs.com/google_containers/coredns 1.6.7 67da37a9a360 15 months ago 43.8MB
registry.aliyuncs.com/google_containers/etcd 3.4.3-0 303ce5db0e90 18 months ago 288MB
#将镜像打包，便于其他节点上使用
docker save -o k8s.tar gcr.azk8s.cn/google-containers/kube-proxy gcr.azk8s.cn/google-containers/kube-apiser
ver gcr.azk8s.cn/google-containers/kube-controller-manager gcr.azk8s.cn/google-containers/kube-scheduler gcr.azk8s.cn/google-containers/etcd gcr.azk8s.cn/google-containers/coredns gcr.azk8s.cn/google-containers/pause
[root@master01 /]# ls -list -h
总用量 647M
52934106 647M -rw-------. 1 root root 647M 11月 14 11:48 k8s.tar
这是我下载的v1.18.0镜像，需要的可以去下载
链接：https://pan.baidu.com/s/1wp1NQxpnteoBv1GKqHkcpQ
提取码：ubw0
初始化前干跑一下
kubeadm init --image-repository="registry.aliyuncs.com/google_containers" --kubernetes-version="v1.18.0" --pod-network-cidr="10.244.0.0/16" --ignore-preflight-errors=Swap --dry-run
没啥问题就可以初始化了
[root@master01 ~]# kubeadm init --image-repository="registry.aliyuncs.com/google_containers" --kubernetes-version="v1.18.0" --pod-network-cidr="10.244.0.0/16" --ignore-preflight-errors=Swap
初始化完成功你将看到
先不忙着操作，把“Your Kubernetes control-plane has initialized successfully!”以下的内容保存下来；
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:
kubeadm join 192.168.200.211:6443 --token gqqhp9.4baj3x2pmcsq9krs \
--discovery-token-ca-cert-hash sha256:9106f14341b54ba70341b79562e7c8576e0e14a70f4a4421e4f5502faba447af \
--control-plane
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.200.211:6443 --token gqqhp9.4baj3x2pmcsq9krs \
--discovery-token-ca-cert-hash sha256:9106f14341b54ba70341b79562e7c8576e0e14a70f4a4421e4f5502faba447af
初始化成功后，按提示完成
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Flannel是 CoreOS 团队针对 Kubernetes 设计的一个覆盖网络（Overlay Network）工具，其目的在于帮助每一个使用 Kuberentes 的 CoreOS 主机拥有一个完整的子网。这次的分享内容将从Flannel的介绍、工作原理及安装和配置三方面来介绍这个工具的使用方法。
Flannel通过给每台宿主机分配一个子网的方式为容器提供虚拟网络，它基于Linux TUN/TAP，使用UDP封装IP包来创建overlay网络，并借助etcd维护网络的分配情况。
链接：https://www.jianshu.com/p/e4c7f83a2a0b
实在下不下来就来着下载吧，百度网盘
链接 https://pan.baidu.com/s/1tjNR329XEivdlgu9Zuc6xg 提取码：ds7n
[root@master01 .kube]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
#安装完成后开始自动创建
[root@master01 kubernetes]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-7ff77c879f-42j25 1/1 Running 0 63m
coredns-7ff77c879f-bwn7l 1/1 Running 0 63m
etcd-master01 1/1 Running 0 63m
kube-apiserver-master01 1/1 Running 0 63m
kube-controller-manager-master01 1/1 Running 4 63m
kube-flannel-ds-amd64-k46n6 1/1 Running 0 10m
kube-proxy-q855k 1/1 Running 0 63m
kube-scheduler-master01 1/1 Running 4 63m
[root@master01 kubernetes]#
#创建完成后就能看到master的状态为Ready
[root@master01 kubernetes]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready master 63m v1.18.0
到此我们的master的安装已经完成
ymal里的内容如下，实在下不了你也可以复制下面的内容，粘贴进flannel.ymal
再运行kubectl apply -f flannel.ymal效果也是一样的！
vum flannel.ymal
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
name: psp.flannel.unprivileged
annotations:
seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
privileged: false
volumes:
- configMap
- secret
- emptyDir
- hostPath
allowedHostPaths:
- pathPrefix: "/etc/cni/net.d"
- pathPrefix: "/etc/kube-flannel"
- pathPrefix: "/run/flannel"
readOnlyRootFilesystem: false
# Users and groups
runAsUser:
rule: RunAsAny
supplementalGroups:
rule: RunAsAny
fsGroup:
rule: RunAsAny
# Privilege Escalation
allowPrivilegeEscalation: false
defaultAllowPrivilegeEscalation: false
# Capabilities
allowedCapabilities: ['NET_ADMIN']
defaultAddCapabilities: []
requiredDropCapabilities: []
# Host namespaces
hostPID: false
hostIPC: false
hostNetwork: true
hostPorts:
- min: 0
max: 65535
# SELinux
seLinux:
# SELinux is unused in CaaSP
rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: flannel
rules:
- apiGroups: ['extensions']
resources: ['podsecuritypolicies']
verbs: ['use']
resourceNames: ['psp.flannel.unprivileged']
- apiGroups:
- ""
resources:
- pods
verbs:
- get
- apiGroups:
- ""
resources:
- nodes
verbs:
- list
- watch
- apiGroups:
- ""
resources:
- nodes/status
verbs:
- patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: flannel
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: flannel
subjects:
- kind: ServiceAccount
name: flannel
namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: flannel
namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
name: kube-flannel-cfg
namespace: kube-system
labels:
tier: node
app: flannel
data:
cni-conf.json: |
{
"name": "cbr0",
"cniVersion": "0.3.1",
"plugins": [
{
"type": "flannel",
"delegate": {
"hairpinMode": true,
"isDefaultGateway": true
}
},
{
"type": "portmap",
"capabilities": {
"portMappings": true
}
}
]
}
net-conf.json: |
{
"Network": "10.244.0.0/16",
"Backend": {
"Type": "vxlan"
}
}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds-amd64
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
- key: kubernetes.io/arch
operator: In
values:
- amd64
hostNetwork: true
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni
image: quay.io/coreos/flannel:v0.11.0-amd64
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.11.0-amd64
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds-arm64
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
- key: kubernetes.io/arch
operator: In
values:
- arm64
hostNetwork: true
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni
image: quay.io/coreos/flannel:v0.11.0-arm64
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.11.0-arm64
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds-arm
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
- key: kubernetes.io/arch
operator: In
values:
- arm
hostNetwork: true
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni
image: quay.io/coreos/flannel:v0.11.0-arm
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.11.0-arm
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds-ppc64le
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
- key: kubernetes.io/arch
operator: In
values:
- ppc64le
hostNetwork: true
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni
image: quay.io/coreos/flannel:v0.11.0-ppc64le
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.11.0-ppc64le
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds-s390x
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
- key: kubernetes.io/arch
operator: In
values:
- s390x
hostNetwork: true
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni
image: quay.io/coreos/flannel:v0.11.0-s390x
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.11.0-s390x
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg
在操作之前，请再次检查你的firewalld服务、iptables服务、selinux服务是否禁用……
请再次检查你的docker是否已经运行
检查完在往下做
分别在node主机上导入镜像
#scp的过程就不写了，
docker load -i k8s.tar
运行初始化时生成的语句
kubeadm join 192.168.40.128:6443 --token ih84g1.da98xytbazu4hwb5 \
--discovery-token-ca-cert-hash sha256:1b5052bda6f68a5c15ed4f63de98f2d96dfb31be9d6cae7423b3372fa1cb1376
要是上面这个忘记保存了或者是token过期也不要紧，在master节点上运行
kubeadm token create --print-join-command
你有可以看到加入的命令啦，复制下来，粘贴到需要加入的节点上运行即可！
[root@k8s-master01 yum.repos.d]# kubeadm token create --print-join-command
W0815 12:54:45.784585 87248 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
kubeadm join 192.168.100.100:6443 --token f8qfep.tjuqqql9fw6lle6d --discovery-token-ca-cert-hash sha256:ced6ab112eb3f065a19b6bbd619d5aee210beb6e4635020d151273ed1d76618d
没有报错的前提下，请到master下运行
[root@master01 .kube]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready master 134m v1.16.2
node01 Ready <none> 27m v1.16.2
node02 Ready <none> 19m v1.16.2
node03 Ready <none> 17m v1.16.2
后面再补充
1457
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
