STM8S003串口printf及帧判断

UART1串口中断

typedef enum { UART1_IT_TXE        = (uint16_t)0x0277, /*!< Transmit interrupt */
               UART1_IT_TC         = (uint16_t)0x0266, /*!< Transmission Complete interrupt */
               UART1_IT_RXNE       = (uint16_t)0x0255, /*!< Receive interrupt */
               UART1_IT_IDLE       = (uint16_t)0x0244, /*!< IDLE line interrupt */
               UART1_IT_OR         = (uint16_t)0x0235, /*!< Overrun Error interrupt */
               UART1_IT_PE         = (uint16_t)0x0100, /*!< Parity Error interrupt */
               UART1_IT_LBDF       = (uint16_t)0x0346, /**< LIN break detection interrupt */
               UART1_IT_RXNE_OR    = (uint16_t)0x0205  /*!< Receive/Overrun interrupt */
             } UART1_IT_TypeDef;

    此处我们使用到UART1_IT_IDLE、UART1_IT_RXNE_OR两个。

    UART1_IT_RXNE_OR是接收/溢出中断，当接收到数据时产生接收中断，未复位接收中断(RXNE)时又接收到一个字符则产生溢出中断。

    UART1_IT_IDLE是