QM Transaction Authorization Category: Quality Management

Definition

This object controls which QM transactions the user may access. The
field values are identical to the transaction code.

Click on the objects below, to expand data.

Object Fields

The list below includes the object’s fields, ordered by industry-standard importance:

TCD

Transaction Code

Filled in 100% of cases

Popularity Statistics

Average popularity of Q_TCODE in roles: 0% (What does this mean?)
Average popularity of Q_TCODE by users: 1% (What does this mean?)

Object Q_TCODE is frequently used by users in the following areas:
BC:Basis Components

Environmental Analysis

1. Common authorization objects used with Q_TCODE:

Q_CERT_PRF	Maintenance Of Certificate Profiles	Objects appear together in 92% of cases
I_AUART	PM: Order Type	Objects appear together in 91% of cases
Q_CAT_SSET	Catalog Maintenance Of Selected Sets	Objects appear together in 91% of cases
Q_STA_QMTB	Maintain Inspection Methods Depending On Status	Objects appear together in 91% of cases
Q_STA_QPMK	Maintain Master Inspection Characs. Depending On Status	Objects appear together in 91% of cases
V_KOND_VEA	Maintain Condition: Auth. For Use/Appl./Cond.Type/Table	Objects appear together in 91% of cases
K_AUFK_ART	CO-OPA: Order Types	Objects appear together in 89% of cases
Q_CAT_GRP	Catalog Maintenance Of Group Codes And Codes	Objects appear together in 89% of cases
V_LIKP_VST	Delivery: Authorization For Shipping Points	Objects appear together in 89% of cases
C_CABN	Authorization For Characteristics Maintenance	Objects appear together in 85% of cases
S_BDS_DS	BC-SRV-KPR-BDS: Authorizations For Document Set	Objects appear together in 85% of cases
S_RFC	Authorization Check For RFC Access	Objects appear together in 85% of cases
C_AFRU_APL	Confirmation: Authorization For Actual Work Center	Objects appear together in 83% of cases
Q_STCK_CHG	Change Stock Posting Fields In UD Transactions	Objects appear together in 83% of cases
C_DRAW_BGR	Authorization For Authorization Groups	Objects appear together in 82% of cases
C_ROUT	Authorizations For Routings	Objects appear together in 82% of cases
C_PROJ_TCD	PS: Transaction-Specific Authorizations In Project System	Objects appear together in 80% of cases
Q_ROUT	Maintain Inspection Plan	Objects appear together in 80% of cases
C_DRAW_DOK	Authorization For Document Access	Objects appear together in 79% of cases
C_DRAW_TCD	Authorization For Document Activities	Objects appear together in 79% of cases
C_DRAW_TCS	Status-Dependent Authorizations For Documents	Objects appear together in 79% of cases
M_EINF_EKO	Purchasing Organization In Purchasing Info Record	Objects appear together in 79% of cases
M_EINF_WRK	Plant In Purchasing Info Record	Objects appear together in 79% of cases
M_MATE_ZST	Material Master: Change Status Of Batches	Objects appear together in 79% of cases
S_APPL_LOG	Applications Log	Objects appear together in 79% of cases
C_AFRU_AWK	CIM: Confirmation	Objects appear together in 77% of cases
Q_UD_CODE	Using Usage Decision Codes	Objects appear together in 77% of cases
S_WFAR_OBJ	Archivelink: Authorizations For Access To Documents	Objects appear together in 77% of cases
M_MATE_STA	Material Master: Maintenance Statuses	Objects appear together in 76% of cases
Q_SPC	Change To Control Charts	Objects appear together in 76% of cases
C_KLAH_BKP	Authorization For Class Maintenance	Objects appear together in 75% of cases
K_VRGNG	CO: Bus. Trans., Actual Postings And Plan/Act. Allocations	Objects appear together in 75% of cases
M_MATE_CHG	Material Master: Batches/Trading Units	Objects appear together in 75% of cases
M_MATE_WRK	Material Master: Plants	Objects appear together in 75% of cases
Q_CHAR_PRC	Recording Authorization For Insp. Results In An Operation	Objects appear together in 75% of cases
Q_INSP_FIN	Inspection Completion With Open Char./Insp.Pts Req. Conf.	Objects appear together in 75% of cases
S_TABU_DIS	Table Maintenance (Via Standard Tools Such As SM30)	Objects appear together in 75% of cases
Q_VORG_MEL	Business Process Quality Notifications	Objects appear together in 73% of cases
C_KLAH_BKL	Authorization For Classification	Objects appear together in 70% of cases
K_REPO_CCA	CO-CCA: Reporting On Cost Centers / Cost Elements	Objects appear together in 70% of cases
K_REPO_OPA	CO-OPA: Reporting On Orders	Objects appear together in 70% of cases
Q_INSPTYPE	Inspection Type For The Insp. Lot	Objects appear together in 70% of cases
Q_MASTERD	Authorization For Master Data	Objects appear together in 70% of cases
B_USERSTAT	Status Management: Set/Delete User Status	Objects appear together in 67% of cases
K_CCA	CO-CCA: Gen. Authorization Object For Cost Center Accounting	Objects appear together in 67% of cases
K_ORDER	CO-OPA: General Authorization Object For Internal Orders	Objects appear together in 66% of cases
C_DRAD_OBJ	Create/Change/Display/Delete Object Link	Objects appear together in 61% of cases
B_NOTIF	Follow-Up Functions For General Notifications	Objects appear together in 58% of cases
C_TCLS_MNT	Authorization For Characteristics Of Org. Area	Objects appear together in 58% of cases
I_KOSTL	PM: Cost Centers	Objects appear together in 58% of cases
Q_MATERIAL	Material Authorization	Objects appear together in 57% of cases
B_NOT_TASK	Access To Tasks In General Notifications	Objects appear together in 55% of cases
C_TCLS_BER	Authorization For Org. Areas In Classification System	Objects appear together in 55% of cases
I_BEGRP	PM: Authorization Group	Objects appear together in 52% of cases
I_INGRP	PM: Maintenance Planner Group	Objects appear together in 52% of cases
I_IWERK	PM: Maintenance Planning Plant	Objects appear together in 52% of cases
I_SWERK	PM: Maintenance Plant	Objects appear together in 52% of cases
Q_GP_CODE	Use Of Group Codes	Objects appear together in 44% of cases
I_QMEL	PM/QM: Notification Types	Objects appear together in 39% of cases
C_TCLA_BKA	Authorization For Class Types	Objects appear together in 33% of cases
Q_QMEL	Quality Notification Types	Objects appear together in 32% of cases
I_TCODE	PM: Transaction Code	Objects appear together in 30% of cases
S_TCODE	Transaction Code Check At Transaction Start	Objects appear together in 0% of cases

  2. Appearance of Q_TCODE in T-Codes:

/SAPSMOSS/QM50	Time line display:R/3 notifications	Used in 100% of cases
CVDA	EHS: Create Variant Conditions	Used in 100% of cases
CVDB	EHS: Change Variant Conditions	Used in 100% of cases
CVDC	EHS: Display Variant Conditions	Used in 100% of cases
CVDD	EHS: Create Variant Cond. w. Templ.	Used in 100% of cases
OQIA	Maintain variant: Q-level evaluation	Used in 100% of cases
OQIC	Work list variant for results rec.	Used in 100% of cases
OQS8	Customizing for IQS8	Used in 100% of cases
QA01A	Create Inspection Lot	Used in 100% of cases
QA02A	Change Inspection Lot	Used in 100% of cases
QA09	No. range maintenance for insp.lots	Used in 100% of cases
QA19	Automatic usage decision	Used in 100% of cases
QAS1	Download Insp. Specs. (Obsolete)	Used in 100% of cases
QAS2	Download Basic Data (Obsolete)	Used in 100% of cases
QAS3	Upload Results (Obsolete)	Used in 100% of cases
QAS4	Upload UD (Obsolete)	Used in 100% of cases
QC11	Create cert. profile assignment	Used in 100% of cases
QC12	Change cert. profile assignment	Used in 100% of cases
QC13	Display cert. profile assignment	Used in 100% of cases
QC14	Create cert.prof.assign.w/copy model	Used in 100% of cases
QCC0	QM: Direct Access to IMG	Used in 100% of cases
QD35	Delete job overview for Q-levels	Used in 100% of cases
QS43	Maintain catalog	Used in 100% of cases
QS44	Maintain catalog	Used in 100% of cases
QS45	Display catalog	Used in 100% of cases
QS47	Central replacement of code groups	Used in 100% of cases
QS4A	Display catalog	Used in 100% of cases
QS53	Maintain individual selected set	Used in 100% of cases
QS54	Maintain selected set	Used in 100% of cases
QS55	Display selected set	Used in 100% of cases
QST03	Display Stability History	Used in 100% of cases
QST04	Display Inspection Plans	Used in 100% of cases
QST05	Graphical Scheduling Overview	Used in 100% of cases
QST06	Scheduling Overview (StabilityStudy)	Used in 100% of cases
QST07	Change Testing Schedule Items	Used in 100% of cases
QST08	Display Testing Schedule Items	Used in 100% of cases
WAO_QA32WP	QA32 -Call from Workplace/MiniApp	Used in 100% of cases
WAO_QM10WP	QM10 – Call from Workplace/MiniApp	Used in 100% of cases
WAO_QM13WP	QM13 – Call from Workplace/MiniApp	Used in 100% of cases
QA05	Job planning: Periodic inspection	Used in 98% of cases
QA06	Job overview: Periodic inspection	Used in 98% of cases
QA07L	Deadline Monitoring Log	Used in 98% of cases
QA08	Collective Processing of Insp. Setup	Used in 98% of cases
QA22	Change inspection point quantities	Used in 98% of cases
QA23	Display insp.point quantities	Used in 98% of cases
QC01	Create certificate profile	Used in 98% of cases
QC02	Change certificate profile	Used in 98% of cases
QC03	Display certificate profile	Used in 98% of cases
QC06	Immediate delete of cert. profiles	Used in 98% of cases
QC15	Create cert. profile assignment	Used in 98% of cases
QC16	Change cert. profile assignment	Used in 98% of cases
QC17	Display cert. profile assignment	Used in 98% of cases
QC18	Create cert.prof.assign.w/copy model	Used in 98% of cases
QC40	Internet Certificate for Delivery	Used in 98% of cases
QC40A	Internet Certificate for Delivery	Used in 98% of cases
QC42	Batch certificate on WWW	Used in 98% of cases
QD34	Delete quality level planning	Used in 98% of cases
QDB1	Maintain allowed relationships	Used in 98% of cases
QDP1	Create sampling scheme	Used in 98% of cases
QDP2	Change sampling scheme	Used in 98% of cases
QDP3	Display sampling scheme	Used in 98% of cases
QDR1	Create dynamic modification rule	Used in 98% of cases
QDR2	Change dynamic modification rule	Used in 98% of cases
QDR3	Display dynamic modification rule	Used in 98% of cases
QDR6	Disp. where-used list-dyn. mod. rule	Used in 98% of cases
QDR7	Replace dynamic mod. rule used	Used in 98% of cases
QDV6	Uses: Sampling procedures	Used in 98% of cases
QDV7	Replace sampling procedure used	Used in 98% of cases
QE01	Record characteristic results	Used in 98% of cases
QE02	Change characteristic results	Used in 98% of cases
QE04	Record sample results	Used in 98% of cases
QE05	Change sample results	Used in 98% of cases
QE06	Display sample results	Used in 98% of cases
QE11	Record results for inspection point	Used in 98% of cases
QE12	Change results for inspection point	Used in 98% of cases
QE13	Display results for inspection point	Used in 98% of cases
QE14	Record results for delivery note	Used in 98% of cases
QE15	Change results for delivery note	Used in 98% of cases
QE16	Display results for delivery note	Used in 98% of cases
QE17	Record results for equipment	Used in 98% of cases
QE18	Change results for equipment	Used in 98% of cases
QE19	Display results for equipment	Used in 98% of cases
QE20	Record results for funct. location	Used in 98% of cases
QE21	Change results for funct. location	Used in 98% of cases
QE22	Display results for funct. location	Used in 98% of cases
QE51	Results recording worklist	Used in 98% of cases
QE53	Worklist: Record results for equip.	Used in 98% of cases
QE54	Worklist: Results for funct. loctns	Used in 98% of cases
QE72	Tabular Results Rec. for Insp. Lots	Used in 98% of cases
QE73	Tabular res. recording for characs.	Used in 98% of cases
QF11	Record defects for inspection lot	Used in 98% of cases
QF21	Record defects for operation	Used in 98% of cases
QF31	Record defects for characteristic	Used in 98% of cases
QI01	Create quality info. – purchasing	Used in 98% of cases
QI02	Change qual.information – purchasing	Used in 98% of cases
QI04	Job planning for QM procurement keys	Used in 98% of cases
QI05	Mass maintenance QM procurement keys	Used in 98% of cases
QI06	QM Releases: Mass maintenance	Used in 98% of cases
QI08	Job overview of QM procurement keys	Used in 98% of cases
QL41	Distribute Code Groups (ALE)	Used in 98% of cases
QM19	List of Q Notifications, Multi-Level	Used in 98% of cases
QMW1	Create quality notification (WWW)	Used in 98% of cases
QP05	Print inspection plan	Used in 98% of cases
QP60	Time-related development of plans	Used in 98% of cases
QP61	Display change documents insp.plan	Used in 98% of cases
QP62	Change documents ref.operation sets	Used in 98% of cases
QPR7	Storage Data Maintenance	Used in 98% of cases
QPV2	Maintain sample drawing procedure	Used in 98% of cases
QPV3	Display sample drawing procedure	Used in 98% of cases
QS38	Display inspection method list	Used in 98% of cases
QS61	Maintain material specification	Used in 98% of cases
QS63	Maintain material spec: Planning	Used in 98% of cases
QS65	Activate material specification	Used in 98% of cases
QV51	Create control for QM in SD	Used in 98% of cases
QV52	Change control for QM in SD	Used in 98% of cases
QVM1	Inspection lots without completion	Used in 98% of cases
/SAPSMOSS/QM10	Change list of R/3 notificatiions	Used in 97% of cases
/SAPSMOSS/QM11	Display list of R/3 notifications	Used in 97% of cases
/SAPSMOSS/QM12	Change list of tasks	Used in 97% of cases
/SAPSMOSS/QM13	Display list of tasks	Used in 97% of cases
QA10	Trigger automatic usage decision	Used in 97% of cases
QA10L	Log for Automatic Usage Decision	Used in 97% of cases
QA17	Job planning for auto usage decision	Used in 97% of cases
QA18	Job overview for auto usage decision	Used in 97% of cases
QA40	Auto. Usage Decision for Production	Used in 97% of cases
QA40L	Log for Automatic Usage Decision	Used in 97% of cases
QA41	Scheduling UD for Production Lots	Used in 97% of cases
QA42	Job planning: UD prod. insp.lots	Used in 97% of cases
QC20	Certificates for Deliveries	Used in 97% of cases
QC21	Quality certificate for the insp.lot	Used in 97% of cases
QC31	Archive display: Delivery item	Used in 97% of cases
QC32	Archive display: Inspection lot	Used in 97% of cases
QDV1	Create sampling procedure	Used in 97% of cases
QDV2	Change sampling procedure	Used in 97% of cases
QDV3	Display sampling procedure	Used in 97% of cases
QE24	Change results for phys. sample	Used in 97% of cases
QE25	Display results for phys. sample	Used in 97% of cases
QE52	Worklist: Results for phys. sample	Used in 97% of cases
QE71	Tabular res. recording for insp. pts	Used in 97% of cases
QEW01	Results Recording on Web	Used in 97% of cases
QF01	Record defect data	Used in 97% of cases
QF02	Change defect data	Used in 97% of cases
QGD1	Test Equipment Usage List	Used in 97% of cases
QGD2	Test Equipment Tracking	Used in 97% of cases
QGP2	Results History for Task List Charac	Used in 97% of cases
QK01	Assign QM order to material	Used in 97% of cases
QK02	Display assigned QM orders	Used in 97% of cases
QK04	Create QM order	Used in 97% of cases
QL11	Mat: Distribute Inspection Setup-ALE	Used in 97% of cases
QL21	Master Inspection Characs (ALE)	Used in 97% of cases
QL31	Distribute Inspection Methods (ALE)	Used in 97% of cases
QM16	Change activity list	Used in 97% of cases
QP06	List: Missing/unusable insp. plans	Used in 97% of cases
QP07	List: Missing/Unusable GR InspPlans	Used in 97% of cases
QPR1	Create physical sample	Used in 97% of cases
QS21	Create master insp. characteristic	Used in 97% of cases
QS22	Create master insp. charac. version	Used in 97% of cases
QS23	Change master insp. charac. version	Used in 97% of cases
QS25	Delete master insp. charac. version	Used in 97% of cases
QS26	Display characteristic use	Used in 97% of cases
QS27	Replace master insp. characteristic	Used in 97% of cases
QS31	Create inspection method	Used in 97% of cases
QS32	Create inspection method version	Used in 97% of cases
QS33	Change inspection method version	Used in 97% of cases
QS35	Delete inspection method version	Used in 97% of cases
QS36	Display inspection method use	Used in 97% of cases
QS37	Central replacement of methods	Used in 97% of cases
QS46	Display code group use	Used in 97% of cases
QS51	Edit Selected Sets	Used in 97% of cases
QS52	Display selected set index	Used in 97% of cases
QS58	Usage indicator – selected sets	Used in 97% of cases
QS66	Plan activation of material spec.	Used in 97% of cases
QS67	Job overview: Activate mat. spec.	Used in 97% of cases
QA52	Source inspections: Job overview	Used in 95% of cases
QC22	Quality Certificate for Batch	Used in 95% of cases
QGA1	Display quality score time line	Used in 95% of cases
QGA2	Display inspection results	Used in 95% of cases
QGP1	Results history for task list charac	Used in 95% of cases
QI07	Incoming insp. and open pur. orders	Used in 95% of cases
QS41	Maintain catalog	Used in 95% of cases
QS42	Display catalog	Used in 95% of cases
QS48	Usage indicator – code groups	Used in 95% of cases
QA51	Scheduling Source Inspections	Used in 94% of cases
QAC1	Change insp. lot actual quantity	Used in 94% of cases
QAC2	Transfer stock to insp. lot	Used in 94% of cases
QAC3	Reset sample	Used in 94% of cases
QDH1	Q-level evaluation: Change data	Used in 94% of cases
QDL1	Create quality level	Used in 94% of cases
QDL2	Change quality level	Used in 94% of cases
QE09	Indiv.display of charac.result	Used in 94% of cases
QK05	Confirmed activities for insp. lot	Used in 94% of cases
QM50	Time line display Q notifications	Used in 94% of cases
QPR2	Change physical sample	Used in 94% of cases
QPR3	Display physical sample	Used in 94% of cases
QPR4	Confirm physical sample drawing	Used in 94% of cases
QPR6	Create new phys.-samp. drawing w.ref	Used in 94% of cases
QS28	Display insp. charac. list	Used in 94% of cases
QS34	Display inspection method version	Used in 94% of cases
QVM2	Inspection lots with open quantities	Used in 94% of cases
QA01	Create Inspection Lot	Used in 92% of cases
QA07	Trigger for recurring inspection	Used in 92% of cases
QA16	Collective UD for accepted lots	Used in 92% of cases
QDL3	Display quality level	Used in 92% of cases
QE03	Display characteristic results	Used in 92% of cases
QM10	Change list of quality notifications	Used in 92% of cases
QM14	Change list of items	Used in 92% of cases
QPR5	Manual inspection lots for physSamps	Used in 92% of cases
QS62	Display material specification	Used in 92% of cases
QS64	Display material spec: For key date	Used in 92% of cases
QVM3	Lots without usage decision	Used in 92% of cases
QA12	Change usage decision with history	Used in 91% of cases
QA14	Change UD without history	Used in 91% of cases
QDH2	Q-level evaluation: Display data	Used in 91% of cases
QE51N	Results Recording Worklist	Used in 91% of cases
QF03	Display defect data	Used in 91% of cases
QGA3	Print inspection results	Used in 91% of cases
QI03	Display quality info. – purchasing	Used in 91% of cases
QM01	Create quality notification	Used in 91% of cases
QM15	Display list of items	Used in 91% of cases
QM17	Display activity list	Used in 91% of cases
QS24	Display master insp. charac. version	Used in 91% of cases
QS59	Display selected sets	Used in 91% of cases
QV53	Display control for QM in SD	Used in 91% of cases
QA02	Change Inspection Lot	Used in 89% of cases
QA11	Record usage decision	Used in 89% of cases
QA32WP	QA32 -Call from Workplace/MiniApp	Used in 89% of cases
QE23	Record results for phys. sample	Used in 89% of cases
QGC1	Qual. control charts for insp. lots	Used in 89% of cases
QGC2	Control charts for task list charac.	Used in 89% of cases
QGC3	Control charts for master insp. char	Used in 89% of cases
QM02	Change quality notification	Used in 89% of cases
QM12	Change list of tasks	Used in 89% of cases
QS49	Display code groups and codes	Used in 89% of cases
IQS8WP	IQS8 – Call from Workplace/MiniApp	Used in 88% of cases
IQS9WP	IQS9 – Call from Workplace/MiniApp	Used in 88% of cases
QA33	Display data for inspection lot	Used in 88% of cases
QM10WP	QM10 – Call from Workplace/MiniApp	Used in 88% of cases
QM13WP	QM13 – Call from Workplace/MiniApp	Used in 88% of cases
QA13	Display usage decision	Used in 86% of cases
QA32	Change data for inspection lot	Used in 86% of cases
QM11	Display List of Qual. Notifications	Used in 85% of cases
IQS21	Create Notif. – Simplified View	Used in 83% of cases
QM13	Display list of tasks	Used in 83% of cases
IQS1	Create Notification – Extended View	Used in 82% of cases
IQS12	Process Task	Used in 82% of cases
IQS2	Change Notification – Extended View	Used in 80% of cases
QM03	Display quality notification	Used in 80% of cases
IQS22	Process Notif. – Simplified View	Used in 79% of cases
QA03	Display inspection lot	Used in 79% of cases
IQS13	Display Task	Used in 77% of cases
IQS23	Display Notif. – Simplified View	Used in 73% of cases
IQS8	Worklist: Notifications (General)	Used in 73% of cases
IQS9	Worklist: Tasks (General)	Used in 73% of cases
IQS3	Display Notification – Extended View	Used in 72% of cases