distcc 链接失败_Firefly-RK3399-编码api介绍

#用户请用 `fdisk -l` 查询 SD 卡设备名是什么，在用 gdisk 命令进入对应的设备 sudo gdisk /dev/sdb GPT fdisk (gdisk) version 1.0.3 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): ------------------------------------------------------------------- #输入 ? 查看帮助信息 # 按 p 显示 SD 卡当前已有分区，由于使用的 SD 卡暂未创建分区，所以没有查询到分区信息 Command (? for help): p Disk /dev/sdb: 15278080 sectors, 7.3 GiB Model: CARD-READER Sector size (logical/physical): 512/512 bytes Disk identifier (GUID): 5801AE61-92ED-42FB-A144-E522E8E15827 Partition table holds up to 128 entries Main partition table begins at sector 2 and ends at sector 33 First usable sector is 34, last usable sector is 15278046 Partitions will be aligned on 2048-sector boundaries Total free space is 15278013 sectors (7.3 GiB) Number Start (sector) End (sector) Size Code Name ------------------------------------------------------------------- #创建新的分区，请用户根据自身实际情况创建合适的分区大小给根文件系统 Command (? for help): n #输入 n 创建新分区 Partition number (1-128, default 1): 1 #输入1创建第一个分区 First sector (34-15278046, default = 2048) or {+-}size{KMGTP}: #直接按回车，使用默认值 Last sector (2048-15278046, default = 15278046) or {+-}size{KMGTP}: +3G #创建分区大小为3G Current type is 'Linux filesystem' Hex code or GUID (L to show codes, Enter = 8300): #按回车使用默认值 Changed type of partition to 'Linux filesystem' ------------------------------------------------------------------- #创建完成后，输入 i，可以查看分区的 unique GUID Command (? for help): i Using 1 Partition GUID code: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 (Linux filesystem) Partition unique GUID: 6278AF5D-BC6B-4213-BBF6-47D333B5CB53 #使用的是该分区的 unique GUID，记下前12位即可 First sector: 2048 (at 1024.0 KiB) Last sector: 6293503 (at 3.0 GiB) Partition size: 6291456 sectors (3.0 GiB) Attribute flags: 0000000000000000 Partition name: 'Linux filesystem' ------------------------------------------------------------------- #输入 wq 保存修改并退出 Command (? for help): wq Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N): y OK; writing new GUID partition table (GPT) to /dev/sdb. Warning: The kernel is still using the old partition table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) The operation has completed successfully.