蓝牙测试-controller_hci_uart_esp32

ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:6728
load:0x40078000,len:14812
ho 0 tail 12 room 4
load:0x40080400,len:3792
entry 0x40080694
[0;32mI (29) boot: ESP-IDF v4.4-dev-3401-gb86fe0c66-dirty 2nd stage bootloader[0m
[0;32mI (29) boot: compile time 16:59:43[0m
[0;32mI (30) boot: chip revision: 1[0m
[0;32mI (34) boot_comm: chip revision: 1, min. bootloader chip revision: 0[0m
[0;32mI (41) boot.esp32: SPI Speed      : 40MHz[0m
[0;32mI (45) boot.esp32: SPI Mode       : DIO[0m
[0;32mI (50) boot.esp32: SPI Flash Size : 2MB[0m
[0;32mI (54) boot: Enabling RNG early entropy source...[0m
[0;32mI (60) boot: Partition Table:[0m
[0;32mI (63) boot: ## Label            Usage          Type ST Offset   Length[0m
[0;32mI (71) boot:  0 nvs              WiFi data        01 02 00009000 00006000[0m
[0;32mI (78) boot:  1 phy_init         RF data          01 01 0000f000 00001000[0m
[0;32mI (86) boot:  2 factory          factory app      00 00 00010000 00100000[0m
[0;32mI (93) boot: End of partition table[0m
[0;32mI (97) boot_comm: chip revision: 1, min. application chip revision: 0[0m
[0;32mI (104) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=0b954h ( 47444) map[0m
[0;32mI (130) esp_image: segment 1: paddr=0001b97c vaddr=3ffbdb60 size=045f8h ( 17912) load[0m
[0;32mI (137) esp_image: segment 2: paddr=0001ff7c vaddr=40080000 size=0009ch (   156) load[0m
[0;32mI (138) esp_image: segment 3: paddr=00020020 vaddr=400d0020 size=35db8h (220600) map[0m
[0;32mI (224) esp_image: segment 4: paddr=00055de0 vaddr=4008009c size=1687ch ( 92284) load[0m
[0;32mI (262) esp_image: segment 5: paddr=0006c664 vaddr=50000000 size=00010h (    16) load[0m
[0;32mI (274) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (274) boot: Disabling RNG early entropy source...[0m
[0;32mI (285) cpu_start: Pro cpu up.[0m
[0;32mI (286) cpu_start: Starting app cpu, entry point is 0x4008115c[0m
[0;32mI (0) cpu_start: App cpu up.[0m
[0;32mI (300) cpu_start: Pro cpu start user code[0m
[0;32mI (300) cpu_start: cpu freq: 160000000[0m
[0;32mI (300) cpu_start: Application information:[0m
[0;32mI (304) cpu_start: Project name:     controller_hci_uart[0m
[0;32mI (310) cpu_start: App version:      v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (317) cpu_start: Compile time:     Oct 15 2021 16:58:57[0m
[0;32mI (323) cpu_start: ELF file SHA256:  c03d1b828643aa95...[0m
[0;32mI (329) cpu_start: ESP-IDF:          v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (336) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (343) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM[0m
[0;32mI (349) heap_init: At 3FFB7CD8 len 00000328 (0 KiB): DRAM[0m
[0;32mI (356) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM[0m
[0;32mI (362) heap_init: At 3FFC37D8 len 0001C828 (114 KiB): DRAM[0m
[0;32mI (368) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM[0m
[0;32mI (374) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM[0m
[0;32mI (381) heap_init: At 40096918 len 000096E8 (37 KiB): IRAM[0m
[0;32mI (388) spi_flash: detected chip: generic[0m
[0;32mI (392) spi_flash: flash io: dio[0m
[0;33mW (396) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
[0;32mI (410) cpu_start: Starting scheduler on PRO CPU.[0m
[0;32mI (0) cpu_start: Starting scheduler on APP CPU.[0m
[0;32mI (439) CONTROLLER_UART_HCI: HCI UART1 Pin select: TX 5, RX, 18, CTS 23, RTS 19[0m
[0;32mI (439) BTDM_INIT: BT controller compile version [1e3e264][0m
[0;32mI (449) system_api: Base MAC address is not set[0m
[0;32mI (449) system_api: read default base MAC address from EFUSE[0m
[0;32mI (459) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07[0m

D:\A-ESP-IDF\examples\bluetooth\hci\controller_hci_uart_esp32\main\controller_hci_uart_demo.c

直接编译OK

效果和我自己的一样  接线不变 PI不变

编译隔壁C3的log

ESP-ROM:esp32c3-api1-20210207
Build:Feb  7 2021
rst:0x1 (POWERON),boot:0xc (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd6100,len:0x1730
load:0x403ce000,len:0x930
load:0x403d0000,len:0x2d68
entry 0x403ce000
[0;32mI (30) boot: ESP-IDF v4.4-dev-3401-gb86fe0c66-dirty 2nd stage bootloader[0m
[0;32mI (30) boot: compile time 17:51:29[0m
[0;32mI (30) boot: chip revision: 3[0m
[0;32mI (34) boot.esp32c3: SPI Speed      : 80MHz[0m
[0;32mI (39) boot.esp32c3: SPI Mode       : DIO[0m
[0;32mI (43) boot.esp32c3: SPI Flash Size : 2MB[0m
[0;32mI (48) boot: Enabling RNG early entropy source...[0m
[0;32mI (54) boot: Partition Table:[0m
[0;32mI (57) boot: ## Label            Usage          Type ST Offset   Length[0m
[0;32mI (64) boot:  0 nvs              WiFi data        01 02 00009000 00006000[0m
[0;32mI (72) boot:  1 phy_init         RF data          01 01 0000f000 00001000[0m
[0;32mI (79) boot:  2 factory          factory app      00 00 00010000 00100000[0m
[0;32mI (87) boot: End of partition table[0m
[0;32mI (91) esp_image: segment 0: paddr=00010020 vaddr=3c040020 size=0b608h ( 46600) map[0m
[0;32mI (107) esp_image: segment 1: paddr=0001b630 vaddr=3fc8d000 size=0223ch (  8764) load[0m
[0;32mI (109) esp_image: segment 2: paddr=0001d874 vaddr=40380000 size=027a4h ( 10148) load[0m
[0;32mI (118) esp_image: segment 3: paddr=00020020 vaddr=42000020 size=3514ch (217420) map[0m
[0;32mI (159) esp_image: segment 4: paddr=00055174 vaddr=403827a4 size=0a764h ( 42852) load[0m
[0;32mI (167) esp_image: segment 5: paddr=0005f8e0 vaddr=50000000 size=00010h (    16) load[0m
[0;32mI (171) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (171) boot: Disabling RNG early entropy source...[0m
[0;32mI (187) cpu_start: Pro cpu up.[0m
[0;32mI (196) cpu_start: Pro cpu start user code[0m
[0;32mI (196) cpu_start: cpu freq: 160000000[0m
[0;32mI (196) cpu_start: Application information:[0m
[0;32mI (198) cpu_start: Project name:     controller_hci_uart_demo[0m
[0;32mI (205) cpu_start: App version:      v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (212) cpu_start: Compile time:     Oct 15 2021 17:51:05[0m
[0;32mI (218) cpu_start: ELF file SHA256:  6b82995869f7b8f6...[0m
[0;32mI (224) cpu_start: ESP-IDF:          v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (231) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (238) heap_init: At 3FC903D0 len 0002FC30 (191 KiB): DRAM[0m
[0;32mI (244) heap_init: At 3FCC0000 len 0001F060 (124 KiB): STACK/DRAM[0m
[0;32mI (251) heap_init: At 50000010 len 00001FF0 (7 KiB): RTCRAM[0m
[0;32mI (258) spi_flash: detected chip: generic[0m
[0;32mI (262) spi_flash: flash io: dio[0m
[0;33mW (266) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
[0;32mI (279) sleep: Configure to isolate all GPIO pins in sleep state[0m
[0;32mI (286) sleep: Enable automatic switching of GPIO sleep configuration[0m
[0;32mI (293) cpu_start: Starting scheduler.[0m
[0;32mI (298) gpio: GPIO[4]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (298) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (308) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (318) gpio: GPIO[7]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (328) BTDM_INIT: BT controller compile version [3e61eea][0m
[0;32mI (338) coexist: coexist rom version 9387209[0m
[0;32mI (338) phy_init: phy_version 500,985899c,Apr 19 2021,16:05:08[0m
[0;31mE (348) phy_init: esp_phy_load_cal_data_from_nvs: NVS has not been initialized. Call nvs_flash_init before starting WiFi/BT.[0m
[0;33mW (358) phy_init: failed to load RF calibration data (0x1101), falling back to full calibration[0m
[0;32mI (488) system_api: Base MAC address is not set[0m
[0;32mI (488) system_api: read default base MAC address from EFUSE[0m
[0;32mI (488) BTDM_INIT: Bluetooth MAC: 84:f7:03:52:c4:8a
[0m
[0;32mI (488) UHCI: HCI messages can be communicated over UART1: 
--PINs: TxD 4, RxD 5, RTS 6, CTS 7
--Baudrate: 115200[0m

看上去 波特率换了 接线也换了

再次跑 发现C3也是一样的ok

继续使用S3

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0xb (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fcd0108,len:0x1718
load:0x403b6000,len:0x8c8
load:0x403ba000,len:0x2eb0
entry 0x403b61c0
[0;32mI (24) boot: ESP-IDF v4.4-dev-3401-gb86fe0c66-dirty 2nd stage bootloader[0m
[0;32mI (25) boot: compile time 15:54:44[0m
[0;32mI (25) boot: chip revision: 0[0m
[0;32mI (28) boot.esp32s3: Boot SPI Speed : 80MHz[0m
[0;32mI (33) boot.esp32s3: SPI Mode       : DIO[0m
[0;32mI (38) boot.esp32s3: SPI Flash Size : 2MB[0m
[0;32mI (43) boot: Enabling RNG early entropy source...[0m
[0;33mW (48) bootloader_random: RNG for ESP32-S3 not currently supported[0m
[0;32mI (55) boot: Partition Table:[0m
[0;32mI (58) boot: ## Label            Usage          Type ST Offset   Length[0m
[0;32mI (66) boot:  0 nvs              WiFi data        01 02 00009000 00006000[0m
[0;32mI (73) boot:  1 phy_init         RF data          01 01 0000f000 00001000[0m
[0;32mI (81) boot:  2 factory          factory app      00 00 00010000 00100000[0m
[0;32mI (88) boot: End of partition table[0m
[0;32mI (92) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0b580h ( 46464) map[0m
[0;32mI (109) esp_image: segment 1: paddr=0001b5a8 vaddr=3fc93210 size=0379ch ( 14236) load[0m
[0;32mI (112) esp_image: segment 2: paddr=0001ed4c vaddr=40374000 size=012cch (  4812) load[0m
[0;32mI (119) esp_image: segment 3: paddr=00020020 vaddr=42000020 size=2d874h (186484) map[0m
[0;32mI (160) esp_image: segment 4: paddr=0004d89c vaddr=403752cc size=0df3ch ( 57148) load[0m
[0;32mI (172) esp_image: segment 5: paddr=0005b7e0 vaddr=50000000 size=00010h (    16) load[0m
[0;32mI (179) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (179) boot: Disabling RNG early entropy source...[0m
[0;33mW (181) bootloader_random: RNG for ESP32-S3 not currently supported[0m
[0;32mI (199) cpu_start: Pro cpu up.[0m
[0;32mI (200) cpu_start: Starting app cpu, entry point is 0x4037516c[0m
[0;32mI (0) cpu_start: App cpu up.[0m
[0;32mI (214) cpu_start: Pro cpu start user code[0m
[0;32mI (214) cpu_start: cpu freq: 160000000[0m
[0;32mI (214) cpu_start: Application information:[0m
[0;32mI (216) cpu_start: Project name:     controller_hci_uart_demo[0m
[0;32mI (223) cpu_start: App version:      v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (230) cpu_start: Compile time:     Oct 16 2021 15:53:16[0m
[0;32mI (236) cpu_start: ELF file SHA256:  a3064c1dde9ee1be...[0m
[0;32mI (242) cpu_start: ESP-IDF:          v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (249) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (256) heap_init: At 3FC975F8 len 00048A08 (290 KiB): D/IRAM[0m
[0;32mI (262) heap_init: At 3FCE0000 len 0000EE34 (59 KiB): STACK/DRAM[0m
[0;32mI (269) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM[0m
[0;32mI (276) spi_flash: detected chip: generic[0m
[0;32mI (280) spi_flash: flash io: dio[0m
[0;33mW (284) spi_flash: Detected size(8192k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
[0;32mI (298) cpu_start: Starting scheduler on PRO CPU.[0m
[0;32mI (0) cpu_start: Starting scheduler on APP CPU.[0m
[0;32mI (328) gpio: GPIO[4]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (328) gpio: GPIO[6]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (338) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (348) gpio: GPIO[7]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 [0m
[0;32mI (358) BT_INIT: BT controller compile version [3e61eea][0m
[0;32mI (368) coexist: coexist rom version e7ae62f[0m
[0;32mI (368) phy_init: phy_version 100,24b028a,Jul  1 2021,14:17:09[0m
[0;31mE (378) phy_init: esp_phy_load_cal_data_from_nvs: NVS has not been initialized. Call nvs_flash_init before starting WiFi/BT.[0m
[0;33mW (388) phy_init: failed to load RF calibration data (0x1101), falling back to full calibration[0m
[0;32mI (438) system_api: Base MAC address is not set[0m
[0;32mI (438) system_api: read default base MAC address from EFUSE[0m
[0;32mI (438) BT_INIT: Bluetooth MAC: 34:b4:72:70:03:aa
[0m
[0;32mI (448) UHCI: HCI messages can be communicated over UART1: 
--PINs: TxD 4, RxD 5, RTS 6, CTS 7
--Baudrate: 115200[0m

log里面有fail也是bt 不是btdm

实际试一试 是可以的

杜邦线直接连接 不要中间延长 容易如下失败！ 

S3跑混合模式代码是OK

[0;32mI (178) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (178) boot: Disabling RNG early entropy source...[0m
[0;33mW (180) bootloader_random: RNG for ESP32-S3 not currently supported[0m
[0;32mI (199) cpu_start: Pro cpu up.[0m
[0;32mI (199) cpu_start: Starting app cpu, entry point is 0x40375140[0m
[0;32mI (0) cpu_start: App cpu up.[0m
[0;32mI (213) cpu_start: Pro cpu start user code[0m
[0;32mI (213) cpu_start: cpu freq: 160000000[0m
[0;32mI (213) cpu_start: Application information:[0m
[0;32mI (216) cpu_start: Project name:     ble_adv_scan[0m
[0;32mI (221) cpu_start: App version:      v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (228) cpu_start: Compile time:     Oct 16 2021 16:35:32[0m
[0;32mI (234) cpu_start: ELF file SHA256:  251547904c0fb1c9...[0m
[0;32mI (240) cpu_start: ESP-IDF:          v4.4-dev-3401-gb86fe0c66-dirty[0m
[0;32mI (247) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (254) heap_init: At 3FC97A00 len 00048600 (289 KiB): D/IRAM[0m
[0;32mI (261) heap_init: At 3FCE0000 len 0000EE34 (59 KiB): STACK/DRAM[0m
[0;32mI (267) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM[0m
[0;32mI (274) spi_flash: detected chip: generic[0m
[0;32mI (278) spi_flash: flash io: dio[0m
[0;33mW (282) spi_flash: Detected size(8192k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
[0;32mI (296) cpu_start: Starting scheduler on PRO CPU.[0m
[0;32mI (0) cpu_start: Starting scheduler on APP CPU.[0m
[0;33mW (347) BT_INIT: esp_bt_controller_mem_release not implemented, return OK[0m
[0;32mI (347) BT_INIT: BT controller compile version [3e61eea][0m
[0;32mI (347) coexist: coexist rom version e7ae62f[0m
[0;32mI (347) phy_init: phy_version 100,24b028a,Jul  1 2021,14:17:09[0m
[0;32mI (407) system_api: Base MAC address is not set[0m
[0;32mI (407) system_api: read default base MAC address from EFUSE[0m
[0;32mI (407) BT_INIT: Bluetooth MAC: 34:b4:72:70:03:aa
[0m
[0;32mI (407) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (417) BLE_ADV_SCAN: Event opcode 0x03 success.[0m
[0;32mI (417) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 1[0m
[0;32mI (1427) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (1427) BLE_ADV_SCAN: Event opcode 0x01 success.[0m
[0;32mI (1427) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 2[0m
[0;32mI (2427) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (2427) BLE_ADV_SCAN: Event opcode 0x06 success.[0m
[0;32mI (2427) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 3[0m
[0;32mI (3427) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (3427) BLE_ADV_SCAN: Event opcode 0x08 success.[0m
[0;32mI (3427) BLE_ADV_SCAN: Starting BLE advertising with name "ESP-BLE-1"[0m
[0;32mI (3427) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 4[0m
[0;32mI (4437) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (4437) BLE_ADV_SCAN: Event opcode 0x0a success.[0m
[0;32mI (4437) BLE_ADV_SCAN: BLE Advertising started..[0m
[0;32mI (4437) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 5[0m
[0;32mI (5337) BLE_ADV_SCAN: Number of received advertising reports: 0[0m
[0;32mI (5447) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (5447) BLE_ADV_SCAN: Event opcode 0x0b success.[0m
[0;32mI (5447) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 6[0m
[0;32mI (6447) BLE_ADV_SCAN: controller rcv pkt ready[0m
[0;32mI (6447) BLE_ADV_SCAN: Event opcode 0x0c success.[0m
[0;32mI (6447) BLE_ADV_SCAN: BLE Scanning started..[0m
[0;32mI (6447) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 7[0m
[0;32mI (7447) BLE_ADV_SCAN: BLE Advertise, cmd_sent: 7[0m
******** Response 1/1 ********
Event type: 04
Address type: 00
Address: 74:22:bb:45:02:38
Data length: 21
Advertisement Name: HONOR Band 6-238
RSSI: -49dB
[0;32mI (10337) BLE_ADV_SCAN: Number of received advertising reports: 107[0m
******** Response 1/1 ********
Event type: 04
Address type: 00
Address: e5:7e:51:b2:f8:3d
Data length: 21
Advertisement Name: Mi Smart Band 4
RSSI: -79dB