ZUC算法调用的demo

写一个ZUC算法的调用demo

import math
from math import ceil

from Packager.TypeExchange import hex_utf8
from utils.SM4.Hex.SM4_cbc import ifHex
from utils.TypeExchange.TypeExchange import bin_hex, utf8_hex

S0 = [
    0x3E, 0x72, 0x5B, 0x47, 0xCA, 0xE0, 0x00, 0x33, 0x04, 0xD1, 0x54, 0x98, 0x09, 0xB9, 0x6D, 0xCB,
    0x7B, 0x1B, 0xF9, 0x32, 0xAF, 0x9D, 0x6A, 0xA5, 0xB8, 0x2D, 0xFC, 0x1D, 0x08, 0x53, 0x03, 0x90,
    0x4D, 0x4E, 0x84, 0x99, 0xE4, 0xCE, 0xD9, 0x91, 0xDD, 0xB6, 0x85, 0x48, 0x8B, 0x29, 0x6E, 0xAC,
    0xCD, 0xC1, 0xF8, 0x1E, 0x73, 0x43, 0x69, 0xC6, 0xB5, 0xBD, 0xFD, 0x39, 0x63, 0x20, 0xD4, 0x38,
    0x76, 0x7D, 0xB2, 0xA7, 0xCF, 0xED, 0x57, 0xC5, 0xF3, 0x2C, 0xBB, 0x14, 0x21, 0x06, 0x55, 0x9B,
    0xE3, 0xEF, 0x5E, 0x31, 0x4F, 0x7F, 0x5A, 0xA4, 0x0D, 0x82, 0x51, 0x49, 0x5F, 0xBA, 0x58, 0x1C,
    0x4A, 0x16, 0xD5, 0x17, 0xA8, 0x92, 0x24, 0x1F, 0x8C, 0xFF, 0xD8, 0xAE, 0x2E, 0x01, 0xD3, 0xAD,
    0x3B, 0x4B, 0xDA, 0x46, 0xEB, 0xC9, 0xDE, 0x9A, 0x8F, 0x87, 0xD7, 0x3A, 0x80, 0x6F, 0x2F, 0xC8,
    0xB1, 0xB4, 0x37, 0xF7, 0x0A, 0x22, 0x13, 0x28, 0x7C, 0xCC, 0x3C, 0x89, 0xC7, 0xC3, 0x96, 0x56,
    0x07, 0xBF, 0x7E, 0xF0, 0x0B, 0x2B, 0x97, 0x52, 0x35, 0x41, 0x79, 0x61, 0xA6, 0x4C, 0x10, 0xFE,
    0xBC, 0x26, 0x95, 0x88, 0x8A, 0xB0, 0xA3, 0xFB, 0xC0, 0x18, 0x94, 0xF2, 0xE1, 0xE5, 0xE9, 0x5D,
    0xD0, 0xDC, 0x11, 0x66, 0x64, 0x5C, 0xEC, 0x59, 0x42, 0x75, 0x12, 0xF5, 0x74, 0x9C, 0xAA, 0x23,
    0x0E, 0x86, 0xAB, 0xBE, 0x2A, 0x02, 0xE7, 0x67, 0xE6, 0x44, 0xA2, 0x6C, 0xC2, 0x93, 0x9F, 0xF1,
    0xF6, 0xFA, 0x36, 0xD2, 0x50, 0x68, 0x9E, 0x62, 0x71, 0x15, 0x3D, 0xD6, 0x40, 0xC4, 0xE2, 0x0F,
    0x8E, 0x83, 0x77, 0x6B, 0x25, 0x05, 0x3F, 0x0C, 0x30, 0xEA, 0x70, 0xB7, 0xA1, 0xE8, 0xA9, 0x65,
    0x8D, 0x27, 0x1A, 0xDB, 0x81, 0xB3, 0xA0, 0xF4, 0x45, 0x7A, 0x19, 0xDF, 0xEE, 0x78, 0x34, 0x60
]

S1 = [
    0x55, 0xC2, 0x63, 0x71, 0x3B, 0xC8, 0x47, 0x86, 0x9F, 0x3C, 0xDA, 0x5B, 0x29, 0xAA, 0xFD, 0x77,
    0x8C, 0xC5, 0x94, 0x0C, 0xA6, 0x1A, 0x13, 0x00, 0xE3, 0xA8, 0x16, 0x72, 0x40, 0xF9, 0xF8, 0x42,
    0x44, 0x26, 0x68, 0x96, 0x81, 0xD9, 0x45, 0x3E, 0x10, 0x76, 0xC6, 0xA7, 0x8B, 0x39, 0x43, 0xE1,
    0x3A, 0xB5, 0x56, 0x2A, 0xC0, 0x6D, 0xB3, 0x05, 0x22, 0x66, 0xBF, 0xDC, 0x0B, 0xFA, 0x62, 0x48,
    0xDD, 0x20, 0x11, 0x06, 0x36, 0xC9, 0xC1, 0xCF, 0xF6, 0x27, 0x52, 0xBB, 0x69, 0xF5, 0xD4, 0x87,
    0x7F, 0x84, 0x4C, 0xD2, 0x9C, 0x57, 0xA4, 0xBC, 0x4F, 0x9A, 0xDF, 0xFE, 0xD6, 0x8D, 0x7A, 0xEB,
    0x2B, 0x53, 0xD8, 0x5C, 0xA1, 0x14, 0x17, 0xFB, 0x23, 0xD5, 0x7D, 0x30, 0x67, 0x73, 0x08, 0x09,
    0xEE, 0xB7, 0x70, 0x3F, 0x61, 0xB2, 0x19, 0x8E, 0x4E, 0xE5, 0x4B, 0x93, 0x8F, 0x5D, 0xDB, 0xA9,
    0xAD, 0xF1, 0xAE, 0x2E, 0xCB, 0x0D, 0xFC, 0xF4, 0x2D, 0x46, 0x6E, 0x1D, 0x97, 0xE8, 0xD1, 0xE9,
    0x4D, 0x37, 0xA5, 0x75, 0x5E, 0x83, 0x9E, 0xAB, 0x82, 0x9D, 0xB9, 0x1C, 0xE0, 0xCD, 0x49, 0x89,
    0x01, 0xB6, 0xBD, 0x58, 0x24, 0xA2, 0x5F, 0x38, 0x78, 0x99, 0x15, 0x90, 0x50, 0xB8, 0x95, 0xE4,
    0xD0, 0x91, 0xC7, 0xCE, 0xED, 0x0F, 0xB4, 0x6F, 0xA0, 0xCC, 0xF0, 0x02, 0x4A, 0x79, 0xC3, 0xDE,
    0xA3, 0xEF, 0xEA, 0x51, 0xE6, 0x6B, 0x18, 0xEC, 0x1B, 0x2C, 0x80, 0xF7, 0x74, 0xE7, 0xFF, 0x21,
    0x5A, 0x6A, 0x54, 0x1E, 0x41, 0x31, 0x92, 0x35, 0xC4, 0x33, 0x07, 0x0A, 0xBA, 0x7E, 0x0E, 0x34,
    0x88, 0xB1, 0x98, 0x7C, 0xF3, 0x3D, 0x60, 0x6C, 0x7B, 0xCA, 0xD3, 0x1F, 0x32, 0x65, 0x04, 0x28,
    0x64, 0xBE, 0x85, 0x9B, 0x2F, 0x59, 0x8A, 0xD7, 0xB0, 0x25, 0xAC, 0xAF, 0x12, 0x03, 0xE2, 0xF2
]

D = [
    0x44D7, 0x26BC, 0x626B, 0x135E, 0x5789, 0x35E2, 0x7135, 0x09AF,
    0x4D78, 0x2F13, 0x6BC4, 0x1AF1, 0x5E26, 0x3C4D, 0x789A, 0x47AC
]


def addition_uint31(a, b):
    c = a + b
    return (c & 0x7FFFFFFF) + (c >> 31)


def rotl_uint31(a, shift):
    return ((a << shift) | (a >> (31 - shift))) & 0x7FFFFFFF


def rotl_uint32(a, shift):
    return ((a << shift) | (a >> (32 - shift))) & 0xFFFFFFFF


def l1(x):
    return (x ^ rotl_uint32(x, 2) ^ rotl_uint32(x, 10) ^ rotl_uint32(x, 18) ^ rotl_uint32(x, 24))


def l2(x):
    return (x ^ rotl_uint32(x, 8) ^ rotl_uint32(x, 14) ^ rotl_uint32(x, 22) ^ rotl_uint32(x, 30))


def make_uint32(a, b, c, d):
    return ((a << 24) & 0xffffffff) | ((b << 16) & 0xffffffff) | ((c << 8) & 0xffffffff) | d


def make_uint31(a, b, c):
    return ((a << 23) & 0x7fffffff) | ((b << 8) & 0x7fffffff) | c


class ZUC(object):
    def __init__(self, key, iv):
        self.r = [0, 0]
        self.lfsr = [0 for _ in range(16)]
        self.x = [0, 0, 0, 0]
        self.zuc_init(key, iv)

    def bit_reorganization(self):
        self.x[0] = ((self.lfsr[15] & 0x7FFF8000) << 1) | (self.lfsr[14] & 0xFFFF)
        self.x[1] = ((self.lfsr[11] & 0xFFFF) << 16) | (self.lfsr[9] >> 15)
        self.x[2] = ((self.lfsr[7] & 0xFFFF) << 16) | (self.lfsr[5] >> 15)
        self.x[3] = ((self.lfsr[2] & 0xFFFF) << 16) | (self.lfsr[0] >> 15)

    def lfsr_next(self):
        f = self.lfsr[0]
        v = rotl_uint31(self.lfsr[0], 8)
        f = addition_uint31(f, v)
        v = rotl_uint31(self.lfsr[4], 20)
        f = addition_uint31(f, v)
        v = rotl_uint31(self.lfsr[10], 21)
        f = addition_uint31(f, v)
        v = rotl_uint31(self.lfsr[13], 17)
        f = addition_uint31(f, v)
        v = rotl_uint31(self.lfsr[15], 15)
        f = addition_uint31(f, v)
        return f

    def lfsr_append(self, f):
        self.lfsr.append(f)
        if len(self.lfsr) > 16:
            self.lfsr.pop(0)

    def lfsr_init(self, u):
        self.lfsr_append(addition_uint31(self.lfsr_next(), u))

    def lfsr_shift(self):
        self.lfsr_append(self.lfsr_next())

    def f(self):
        W = ((self.x[0] ^ self.r[0]) + self.r[1]) & 0xffffffff
        W1 = (self.r[0] + self.x[1]) & 0xffffffff
        W2 = self.r[1] ^ self.x[2]
        u = l1(((W1 & 0x0000ffff) << 16) | (W2 >> 16))
        v = l2(((W2 & 0x0000ffff) << 16) | (W1 >> 16))
        self.r = [make_uint32(S0[u >> 24], S1[(u >> 16) & 0xFF],
                              S0[(u >> 8) & 0xFF], S1[u & 0xFF]),
                  make_uint32(S0[v >> 24], S1[(v >> 16) & 0xFF],
                              S0[(v >> 8) & 0xFF], S1[v & 0xFF])]
        return W

    def zuc_init(self, key, iv):
        # Expand key.
        self.lfsr = [make_uint31(key[i], D[i], iv[i]) for i in range(16)]
        self.r = [0, 0]
        for i in range(32):
            self.bit_reorganization()
            w = self.f()
            self.lfsr_init(w >> 1)

    # 输入是hex，如何？
    def zuc_generate_keystream(self, length):
        keystream_buffer = []
        self.bit_reorganization()
        self.f()  # Discard the output of F.

        def itor():
            self.lfsr_shift()
            self.bit_reorganization()
            # self.x是字节[X0, X1, X2, X3]
            return self.f() ^ self.x[-1]

        # 在encrypt里写一个合理长度length
        keystream_buffer = [itor() for _ in range(length)]
        self.lfsr_shift()
        return keystream_buffer

    # 这个encrypt函数输入的是hex字符串
    def zuc_encrypt(self, input):
        # length = math.ceil(len(input) / 2)
        # length = len(input)
        input_list = self.input_exchange(input)
        plain_list = []
        for a in input_list:
            plain_list.append(int(a, 16))
        if input_list != "None":
            # 存在问题：除以4取整数：解决方案1：向上取整，取余，补余，输出后删减
            length = math.ceil(len(input_list) / 4)
            key_stream = self.zuc_generate_keystream(length)
            key_streamcalc = self.int4list_int2list(key_stream)

            # return [inp ^ key_streamcalc[i] for i, inp in enumerate(plain_list)]
            cipherstream_list = [inp ^ key_streamcalc[i] for i, inp in enumerate(plain_list)]

            hex_str = ""
            for i in cipherstream_list:
                p = hex(i)[2:]
                if 2 - len(p) != 0:
                    p = "0" * (2 - len(p)) + p
                hex_str += p
            # return hex_str, key_streamcalc, plain_list
            return hex_str
        else:
            return "加密失败，输入的内容不正确"

    def input_exchange(self, input):
        list_hex = []
        if ifHex(input):
            j = 0
            while j < len(input):
                cache_hexstr = ""
                for _ in range(2):
                    cache_hexstr += input[j]
                    j += 1
                list_hex.append(cache_hexstr)
        else:
            return "None"
        return list_hex

    def int4list_int2list(self, int_list):
        hex_str = ""
        for y in int_list:
            hex_strnum = hex(y)[2:]
            if 8 - len(hex_strnum) != 0:
                hex_strnum = "0" * (8 - len(hex_strnum)) + hex_strnum
            else:
                hex_strnum = hex_strnum
            hex_str += hex_strnum
        key_hexlist = self.input_exchange(hex_str)
        int2list = []
        for j in key_hexlist:
            int2list.append(int(j, 16))
        return int2list



# 将int_list的密文变成hex输出：
def cipherint_hexstr(int_list):
    hex_list = ["%08x" % e for e in int_list]
    hex_str = ""
    for i in range(len(hex_list)):
        hex_str += hex_list[i]
    return hex_str


def cipherhex_intlist(hex_str):
    list_hex = []
    list_int = []
    i = 0
    while i < len(hex_str):
        j = i
        little_hexstr = ""
        for j in range(j, j + 8):
            little_hexstr += hex_str[j]
        list_hex.append(little_hexstr)

        # print(little_hexstr)
        i += 8
    for x in range(len(list_hex)):
        int_num = int(list_hex[x], 16)
        list_int.append(int_num)

    return list_int


def cipherhex_intlist2(hex_str):
    list_hex = []
    i = 0
    while i < len(hex_str):
        j = i
        little_hexstr = ""
        for _ in range(8):  # 我们只需迭代 8 次来获取 8 个字符
            little_hexstr += hex_str[j]
            j += 1
        list_hex.append(little_hexstr)

        print(little_hexstr)  # 添加用于调试的打印语句
        i += 8

    return list_hex


if '__main__' == __name__:
    key = [0x11] * 16
    iv = [0x2b] * 16
    zuc = ZUC(key, iv)
    data1 = "你这个臭虫"
    data = "你这个臭虫".encode('utf-8')
    print(f"原文是：{data1}\n然而我的这个接口只接收Hex字符串，故")
    datahex = data.hex()
    print("输入的明文转Hex：", datahex, "长度：", len(datahex))

    a34 = "1be4bda0e8bf99e4b8aae887ade899abab"
    # 34个字符
    b = zuc.zuc_encrypt("ce04ada19560c40aba1581523db614")
    print("密文：          ", b, "长度：", len(b))

ZUC底层代码实现引用了部分这个的底层

https://baike.baidu.com/item/%E7%A5%96%E5%86%B2%E4%B9%8B%E7%AE%97%E6%B3%95%E9%9B%86/7177910

但是我认为它的Demo输入输出实现并不正确，所以增加了许多修改内容：

好，最后来做一下整个ZUC加解密的demo实现：

from utils.SM4.Hex.SM4_cbc import ifHex
from utils.TypeExchange.TypeExchange import hex_utf8
from utils.ZUC import ZUC

# 这是开源的ZUC加解密算法底层调用demo

# typechose类型是 hex 与 utf8
from utils.ZUC.ZUC import cipherint_hexstr, cipherhex_intlist

def intlist_hexlist(intlist):
    # hex_list = []
    hex_str = ""
    for i in intlist:
        b = hex(i)[2:]
        if len(b) < 8:
            b = "0" * (8 - len(b)) + b
        # hex_list.append(b)
        hex_str += b
    return hex_str

def cipherhex_intlist2(hex_str):
    # list_hex = []
    i = 0
    list_int = []
    while i < len(hex_str):
        j = i
        little_hexstr = ""
        for _ in range(8):  # 我们只需迭代 8 次来获取 8 个字符
            little_hexstr += hex_str[j]
            j += 1
        # list_hex.append(little_hexstr)
        list_int.append(int(little_hexstr, 16))

        # print(little_hexstr)  # 添加用于调试的打印语句
        i += 8

    return list_int

class ZUCEnc:
    def __init__(self, key, iv):
        if not ifHex(key) and not ifHex(iv):
            self.backfrominit1()
        elif len(key) != 32 or len(iv) != 32:
            self.backfrominit2()

        self.list_key = []
        self.list_iv = []

        for key1, key2 in zip(key[::2], key[1::2]):
            mut_keystr = key1 + key2
            int_key = int(mut_keystr, 16)
            self.list_key.append(int_key)

        for iv1, iv2 in zip(iv[::2], iv[1::2]):
            mut_ivstr = iv1 + iv2
            int_iv = int(mut_ivstr, 16)
            self.list_iv.append(int_iv)

        self.zucdriver1 = ZUC.ZUC(self.list_key, self.list_iv)
        self.zucdriver2 = ZUC.ZUC(self.list_key, self.list_iv)

    def backvalue(self):
        return self.list_iv, self.list_key

    def backfrominit1(self):
        return "输入的key或iv的值不是hex"

    def backfrominit2(self):
        return "输入的key或iv的值的长度不是16字节"

    def encrypt(self, data_stream, plaincode):
        if plaincode == "utf-8":
            try:
                plain_byte = data_stream.encode()
                plain_hex = plain_byte.hex()
                res = self.zucdriver1.zuc_encrypt(plain_hex)
                return res
            except:
                return "输入的原文数据格式不能够以utf8格式转换成byte"
        elif plaincode == "hex":
            try:
                res = self.zucdriver2.zuc_encrypt(data_stream)
                return res
            except:
                return "输入的原文数据格式不不是hex或其他错误"

    def hex_utf8decode(self, input_hex):
        try:
            utf8_str = hex_utf8(input_hex)
            return utf8_str
        except:
            return f"这个不能够以utf8格式转换成字符串，原结果：{input_hex}"
        # elif plaincode == "hex":


if '__main__' == __name__:
    key = "1a2b3c4d5e6f1a2b3c4d5e6f1a2b3c4d"
    iv = "0c54d1824cf8767cf8a32987806e91fe"
    plain1 = "e4b8ade4ba8ce79785e4b99fe8a681e59083e9a5ade5958aefbc81"
    plain2 = "中二病也要吃饭啊！"
    # plain = "fb030222ea179557cfc3e04e400c54d1824cf8767cf8a32987806e91fe6919641dd7d0148eac3b89302cbf17b6735bfca9f3d8e57bb329077549b92e856f29b791e7bc22af8ed2cb300d87f55c10e3c76c00820a0122abc3dfee87"
    zuc = ZUCEnc(key, iv)

    xlist1 = zuc.encrypt(plain1, 'hex')
    print("Hex输入加密结果：", xlist1)

    xlist2 = zuc.encrypt(plain2, 'utf-8')
    print("字符串输入加密结果：", xlist2)

    zup = ZUCEnc(key, iv)
    ylist1 = zup.encrypt(xlist1, 'hex')
    print("hex输入的解密值：", ylist1)

    zux = ZUCEnc(key, iv)
    ylist3 = zux.encrypt(xlist2, 'hex')
    ylist2 = zux.hex_utf8decode(ylist3)
    print("utf8的解密值：", ylist2)

为什么demo里要实例化zuc，zup，zux三个对象呢？是为了重置LFSR寄存器的值！

线上工具可以访问：
https://mp.yh-w.cn/