1.np.arange创建指定步长
函数定义:
def arange(start=None, *args, **kwargs): # real signature unknown; NOTE: unreliably restored from __doc__
"""
arange([start,] stop[, step,], dtype=None)
Return evenly spaced values within a given interval.
Values are generated within the half-open interval ``[start, stop)``
(in other words, the interval including `start` but excluding `stop`).
For integer arguments the function is equivalent to the Python built-in
`range` function, but returns an ndarray rather than a list.
When using a non-integer step, such as 0.1, the results will often not
be consistent. It is better to use `numpy.linspace` for these cases.
Parameters
----------
start : number, optional
Start of interval. The interval includes this value. The default
start value is 0.
stop : number
End of interval. The interval does not include this value, except
in some cases where `step` is not an integer and floating point
round-off affects the length of `out`.
step : number, optional
Spacing between values. For any output `out`, this is the distance
between two adjacent values, ``out[i+1] - out[i]``. The default
step size is 1. If `step` is specified as a position argument,
`start` must also be given.
dtype : dtype
The type of the output array. If `dtype` is not given, infer the data
type from the other input arguments.
Returns
-------
arange : ndarray
Array of evenly spaced values.
For floating point arguments, the length of the result is
``ceil((stop - start)/step)``. Because of floating point overflow,
this rule may result in the last element of `out` being greater
than `stop`.
See Also
--------
numpy.linspace : Evenly spaced numbers with careful handling of endpoints.
numpy.ogrid: Arrays of evenly spaced numbers in N-dimensions.
numpy.mgrid: Grid-shaped arrays of evenly spaced numbers in N-dimensions.
"""
pass
说明:numpy.arange
函数和经常使用的range
函数非常的类似,只是多增加了一个dtype参数,dtype参数的作用和numpy.array
里面介绍的作用是一致的。
range()和arange()只所以这么灵活,一方面是python的灵活的参数机制;另一方面是对接收的参数数目进行判断,根据参数数目的不同执行不同的操作。
示例代码:
# 指定终点
a = np.arange(10)
print(a)
print('--' * 20)
# 指定起点、终点
b = np.arange(1, 10)
print(b)
print('--' * 20)
# 指定起点、终点、步长
c = np.arange(1, 10, 2)
print(c)
print('--' * 20)
# 指定起点、终点、步长、dtype类型
d = np.arange(1, 10, 2, float)
print(d)
print('--' * 20)
# 小数的情况也能使用numpy,实际情况这样使用的比较少
e = np.arange(0.1, 1.0, 0.1, float)
print(e)
运行结果:
[0 1 2 3 4 5 6 7 8 9]
----------------------------------------
[1 2 3 4 5 6 7 8 9]
----------------------------------------
[1 3 5 7 9]
----------------------------------------
[1. 3. 5. 7. 9.]
----------------------------------------
[0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9]
2.np.random.random创建随机数
用于创建值范围在[0.0, 1.0)区间的随机数组
函数定义:
def random(size=None): # real signature unknown; restored from __doc__
"""
random(size=None)
Return random floats in the half-open interval [0.0, 1.0). Alias for
`random_sample` to ease forward-porting to the new random API.
"""
pass
通过介绍可以知道,random是random_sample的别名。我们再来看一下random_sample函数。
def random_sample(size=None): # real signature unknown; restored from __doc__
"""
random_sample(size=None)
Return random floats in the half-open interval [0.0, 1.0).
Results are from the "continuous uniform" distribution over the
stated interval. To sample :math:`Unif[a, b), b > a` multiply
the output of `random_sample` by `(b-a)` and add `a`::
(b - a) * random_sample() + a
.. note::
New code should use the ``random`` method of a ``default_rng()``
instance instead; see `random-quick-start`.
Parameters
----------
size : int or tuple of ints, optional
Output shape. If the given shape is, e.g., ``(m, n, k)``, then
``m * n * k`` samples are drawn. Default is None, in which case a
single value is returned.
Returns
-------
out : float or ndarray of floats
Array of random floats of shape `size` (unless ``size=None``, in which
case a single float is returned).
"""
pass
示例代码:
import numpy as np
a1 = np.random.random(size=1)
a2 = np.random.random(size=(1,))
a3 = np.random.random_sample(size=(1,))
print(a1)
print("~~" * 10)
print(a2)
print("~~" * 10)
print(a3)
print('--' * 20)
b1 = np.random.random(size=(2, 3))
b2 = np.random.random_sample(size=(2, 3))
print(b1)
print("~~" * 10)
print(b2)
print("--" * 20)
运行结果:
[0.12406671]
~~~~~~~~~~~~~~~~~~~~
[0.51463238]
~~~~~~~~~~~~~~~~~~~~
[0.89463238]
----------------------------------------
[[0.10907993 0.16789092 0.43668195]
[0.79106801 0.22137333 0.01017769]]
~~~~~~~~~~~~~~~~~~~~
[[0.65803265 0.11789976 0.56492191]
[0.74975911 0.09096749 0.05589122]]
----------------------------------------
程序说明:通过运行结果我们可以看到a1、a2、a3这三个结构一致,说明传递参数最终是以元组的形式进行解析的,另外一个就是random和random_sample效果一致。
为了程序规规范性,建议创建ndarray数组过程指定参数size以元组的形式传递。
3.np.random.randint创建随机整数
主要用于创建指定区间范围的整数数据类型数组
函数定义:
def randint(low, high=None, size=None, dtype=None): # real signature unknown; restored from __doc__
"""
randint(low, high=None, size=None, dtype=int)
Return random integers from `low` (inclusive) to `high` (exclusive).
Return random integers from the "discrete uniform" distribution of
the specified dtype in the "half-open" interval [`low`, `high`). If
`high` is None (the default), then results are from [0, `low`).
.. note::
New code should use the ``integers`` method of a ``default_rng()``
instance instead; see `random-quick-start`.
Parameters
----------
low : int or array-like of ints
Lowest (signed) integers to be drawn from the distribution (unless
``high=None``, in which case this parameter is one above the
*highest* such integer).
high : int or array-like of ints, optional
If provided, one above the largest (signed) integer to be drawn
from the distribution (see above for behavior if ``high=None``).
If array-like, must contain integer values
size : int or tuple of ints, optional
Output shape. If the given shape is, e.g., ``(m, n, k)``, then
``m * n * k`` samples are drawn. Default is None, in which case a
single value is returned.
dtype : dtype, optional
Desired dtype of the result. Byteorder must be native.
The default value is int.
.. versionadded:: 1.11.0
Returns
-------
out : int or ndarray of ints
`size`-shaped array of random integers from the appropriate
distribution, or a single such random int if `size` not provided.
"""
pass
说明:
- 参数
low
和参数high
使用类似于random函数的使用方法 - size用法和上面random函数介绍的一样,建议使用元组
- dtype函数用于指定数据类型,注意:因为randint本身已经指定整数类型的范围,所以不能指定非整形数据类型。
示例代码:
import numpy as np
# 指定终点
a1 = np.random.randint(10)
print(a1)
print('--' * 20)
# 指定起点、终点
b1 = np.random.randint(1, 10)
print(b1)
print('--' * 20)
# 指定起点、终点、大小
c1 = np.random.randint(1, 10, size=(2, 3))
print(c1)
print('--' * 20)
# 指定起点、终点、大小、数据类型
d1 = np.random.randint(1, 10, size=(2, 3), dtype=np.uint8)
print(d1)
print('--' * 20)
运行结果:
9
----------------------------------------
9
----------------------------------------
[[9 8 6]
[1 1 5]]
----------------------------------------
[[6 3 8]
[9 9 5]]
----------------------------------------
4.创建正态分布数组
4.1 np.random.randn创建标准正太分布
用于创建符合标准正态分布(期望为0,方差为1)
函数定义
def randn(*dn): # known case of numpy.random.mtrand.randn
"""
randn(d0, d1, ..., dn)
Return a sample (or samples) from the "standard normal" distribution.
.. note::
This is a convenience function for users porting code from Matlab,
and wraps `standard_normal`. That function takes a
tuple to specify the size of the output, which is consistent with
other NumPy functions like `numpy.zeros` and `numpy.ones`.
.. note::
New code should use the ``standard_normal`` method of a ``default_rng()``
instance instead; see `random-quick-start`.
If positive int_like arguments are provided, `randn` generates an array
of shape ``(d0, d1, ..., dn)``, filled
with random floats sampled from a univariate "normal" (Gaussian)
distribution of mean 0 and variance 1. A single float randomly sampled
from the distribution is returned if no argument is provided.
Parameters
----------
d0, d1, ..., dn : int, optional
The dimensions of the returned array, must be non-negative.
If no argument is given a single Python float is returned.
Returns
-------
Z : ndarray or float
A ``(d0, d1, ..., dn)``-shaped array of floating-point samples from
the standard normal distribution, or a single such float if
no parameters were supplied.
"""
pass
4.2 np.random.common指定方差和期望
用于创建指定期望和方差正态分布数据的数组
函数定义
def normal(loc=0.0, scale=1.0, size=None): # real signature unknown; restored from __doc__
"""
normal(loc=0.0, scale=1.0, size=None)
Draw random samples from a normal (Gaussian) distribution.
The probability density function of the normal distribution, first
derived by De Moivre and 200 years later by both Gauss and Laplace
independently [2]_, is often called the bell curve because of
its characteristic shape (see the example below).
The normal distributions occurs often in nature. For example, it
describes the commonly occurring distribution of samples influenced
by a large number of tiny, random disturbances, each with its own
unique distribution [2]_.
.. note::
New code should use the ``normal`` method of a ``default_rng()``
instance instead; see `random-quick-start`.
Parameters
----------
loc : float or array_like of floats
Mean ("centre") of the distribution.
scale : float or array_like of floats
Standard deviation (spread or "width") of the distribution. Must be
non-negative.
size : int or tuple of ints, optional
Output shape. If the given shape is, e.g., ``(m, n, k)``, then
``m * n * k`` samples are drawn. If size is ``None`` (default),
a single value is returned if ``loc`` and ``scale`` are both scalars.
Otherwise, ``np.broadcast(loc, scale).size`` samples are drawn.
Returns
-------
out : ndarray or scalar
Drawn samples from the parameterized normal distribution.
See Also
--------
scipy.stats.norm : probability density function, distribution or
cumulative density function, etc.
Generator.normal: which should be used for new code.
Notes
-----
The probability density for the Gaussian distribution is
.. math:: p(x) = \frac{1}{\sqrt{ 2 \pi \sigma^2 }}
e^{ - \frac{ (x - \mu)^2 } {2 \sigma^2} },
where :math:`\mu` is the mean and :math:`\sigma` the standard
deviation. The square of the standard deviation, :math:`\sigma^2`,
is called the variance.
The function has its peak at the mean, and its "spread" increases with
the standard deviation (the function reaches 0.607 times its maximum at
:math:`x + \sigma` and :math:`x - \sigma` [2]_). This implies that
normal is more likely to return samples lying close to the mean, rather
than those far away.
References
----------
.. [1] Wikipedia, "Normal distribution",
https://en.wikipedia.org/wiki/Normal_distribution
.. [2] P. R. Peebles Jr., "Central Limit Theorem" in "Probability,
Random Variables and Random Signal Principles", 4th ed., 2001,
pp. 51, 51, 125.
"""
pass
示例代码:
import numpy as np
a1 = np.random.randn(2)
a2 = np.random.normal(0, 1, 2)
print(a1)
print('~~' * 10)
print(a2)
print('--' * 20)
b1 = np.random.randn(2, 3)
b2 = np.random.normal(0, 1, (2, 3))
print(b1)
print('~~' * 10)
print(b2)
运行结果:
[-0.08968467 0.19935229]
~~~~~~~~~~~~~~~~~~~~
[-2.70345057 0.31810813]
----------------------------------------
[[ 0.26098236 0.59379753 -0.70686308]
[-0.78541554 -0.27910239 -0.15193886]]
~~~~~~~~~~~~~~~~~~~~
[[-0.92466689 0.580677 0.80772163]
[ 2.17103711 -0.11340317 -0.06021829]]
备注:
更多精彩博客,请访问:灭bug网-消灭bug 博客内容修改和更新,只更新个人博客。
对应视频教程,请访问:python400
完整markdown笔记,请访问: python400_learn_github